Hi, I have been struggling to get transparent birding to work with VLANS properly. I have two ports bridged, one as LAN and one as WAN in bridge mode. VLAN 1, which is native seems to be working ok. I have another TAGGED vlan, vlan 3, which kind…

Long story short, I was attempting to enable a separate access point to our office XG Firewall, and I changed one of the port interfaces by adding WAN as an option. After doing this, i cant reconnect to the web admin portal via HTTPS and revert the setting…

I'm running Peplink router with 2 POE APs, multiple SSIDs and Vlans. Deployed Sophos XG in bridge mode between the Peplink router, and POE switch. WAN/LAN connections from the Sophos are both connected to trunk ports (any vlan). My bridge interface…

I have a Draytek router in bridge mode connecting to a xg106 firewall. The router is set to 192.168.0.1 and the XG 106 is configured to 192.168.1.254. I need a rule to allow me to navigate from the LAN to the bridged router. Can anyone help.

Hello, DHCP request packets doesn't seem to be transmited throught bridge interface. I created a bridge with 2 ports : 1 classic physical port and 1 VLAN port on an interface. DHCP server is in the LAN connected to the classic physical port (on this…

Hello All, Since upgrading from 18.0.6 MR6 to 18.5.2 MR2 the Wi-Fi SSID associated with the LAN zone via a bridge has stopped working. I have attempted to create a new bridge however it's not possible to adjust the members of the old bridge, the gui…

Hi, an example of my setup: LAN1 (192.168.1.254/24)<<PC1 Lan_Bridge ↴ 192.168.1.253 LAN2 (Lan_Bridge)PC2 LAN3 (Lan_Bridge)PC3 LAN4 (Lan_Bridge)PC4 LAN5 (Lan_Bridge)PC5 Now only LAN1 Port can connect to the internet, what do I need…

Hallo, One of our customers uses an XG firewall in bridge mode. Version 17.5 was updated to version 18.5.2 yesterday. The firewall can communicate with the internet without any problems. However, clients and servers behind the firewall can no longer…

Hey all, this is my first post I think i am missing something and need a little guidance on how to enable access to the sophos gui on the lan side from my main PC within my current setup. The setup (see pics) Router -> Sophos XG -> Core Switch …

Hello Will changing from NAT to Bridge Mode erase all FW rules?

Hi all im searching a solution for this topic: I have made a Zone (Serverzone) and i want it to be as VLAN in Port 3 but i also want it to be in the Port 2(not as VLAN, direct) i tried to made a bridge, but then the VLAN Port didn't work, so whats…

I am quite new to networking and learning new concepts and things every day, but I have no idea how to accomplish the following: I have a modem from my ISP (ZYXEL VMG8825-T50), which connects to my old router (an Asus RT-3200), and now I also connected…

Hello, Can I create a bridge without having to adding it at least two interfaces? I would need to create virtual L2 interface (bridge?) with L3 interface (IPv4) but without having to add physical or VLAN interface. Is there any option over shell?

I have 2 locations that both have fiber Internet and Sophos XG firewalls running the latest version 18.5.1 of the firmware. Location 1 - HQ XG 230 with Sophos XG 18.5.1 WAN - Fiber LAN - Port 6, running DHCP, no Internet access granted, just LAN Location…

I have a XG running 18.5.1 MR1. This XG has 2 physical interface bridged together with multiple VLANs. Each of these connections go to a managed switch via said Bridged(Trunk) connections. I have a Server in VLAN 5 that is connect to one switch…

Hello friends. I created a bridge with ports 1 and 2 on a Sophos XGS 136, both ports are in the LAN zone. The idea is to create high availability, because if one port goes down, the other maintains connectivity, each port is connected to a different…