Why is not possible to create GRE tunnel on bridge-interface (WAN port + DMZ port ) ?

We need to pass one of WAN IPs to another device (Cisco) across Sophos (HA) . Others WAN IP are NATed to LAN port withot problem. This device (Cisco) must have this WAN IP configured on his interface. We have no acces to the Cisco device). How…

Hi all, setup is router -> Firewall -> Ubiquity dream machine. XGS2100 is configured in gateway mode (need to use SSL VPN), wan cable to port2, lan cable to (F1), lan cable is connected to an Ubiquity Dream Machine PRO. In the F1port there…

Can we combine two interfaces of the firewall and assign them a single IP. I need to connect my Sophos to an existing network in such a way that both the combined ports must extend network on both ends. eg : I have a network in 192.168.0.0/16. now…

Hi, I have an XGS107w that I am configuring and i'm having trouble getting clients to communicate from wifi to hard wired clients. I have Port 1 and the wifi network connected via a bridge interface I have two clients connected, one is…

Hey all, I have a Sophos XG connected to an LTE mc801a router in bridge mode. Every night the mc801a is scheduled to reboot, however Sophos doesn't pick up the new DHCP IP address. If I change the interface to static, and then back to DHCP, it picks…

We'd like to deploy an XGS 126 to a field location, and to avoid the need of sending an additional 'access layer' switch, I'd like to configure multiple ports to participate in the same vLAN. I know how to do this on a switch (HP) without thinking about…

Hi - I have a Sophos XG 135 and I have set up two different networks with different Gateway IP addresses. Port 1 uses 192.168.1.1 Port 8 uses 10.150.121.1 Port 2 is the WAN port I would like devices associated with Port 1 to be able to communicate…

Hi, I thought creating a Bridge on XGS-136, for example, creates a "switch" between bridged ports, but either I do not understand principle, or reality does not follow the principle - I found no, bridged ports do not behave like switched ports. For…

Firewall newbee here. I currently have XG ver 19 configured in bridge mode and working for the most part with the Fios router. All wired traffic is working correctly, However the Wifi connections to the Fios router are not being forwarded or Routed…

Have a 3rd party hardware running XG 19 on. It has 6 ports, using one for WAN and the rest (5) are set in a bridged LAN mode following the directions here: https://docs.sophos.com/nsg/sophos-firewall/19.0/Help/en-us/webhelp/onlinehelp/AdministratorHelp…

hi, i'm running a XG210 (SFOS 18.5.3 MR-3-Build408) and have it set-up with a bridge pair BR0 for the primary LAN using Port1 and Port4 as physical members. Both are set as LAN-interfaces. everyting is connected to Port1, port 4 i only use to connect…

Hey guys, Since Monday morning (7:26 AM), Xfinity was "doing some work to upgrade your services" in my apartment complex. I have two XG home editions, running on different hardware, that are able to initially connect once putting the Xfinity gateway…

Hi all, Am asking this question for the second time. I am new to Sophos and am finding it nagging that I can't get the basic functionality without doing a lot. I am setting up a new firewall. By default, a bridge-pair (br0) was created, with Port…

Hello guys. First of all I would like to thank you for taking the time to read my question. I'm trying to understand the need for a NAT (MASQ) in bridge operating mode. And one scenario, I have the need to leave Sophos Firewall (SF) in this mode…

I'm evaluating Sophos XG in a virtual environment with a bridged configuration, an interface br0, with one physical port attached to a router and the other attached to the core switch. 100% of the traffic between the router and switch is 802.1q-tagged…

Hallo Leute Habe heute eine SG230 rev1 bekommen. Installiert und auf wan (Port 1) ist mein Modem. Und die OS hat eine Bridge von Port 0 . 2. 3. 4. und 5 gemacht. Jetzt habe ich auf dem Port 5 mein Proxmox Server dran. Nur komisch ist das ich…

For example, in the following configuration. PortC and PortD can't be selected as the inbound interface of the SNAT rule. br0 can be selected, but that rule does not apply. If select Any, that rule will be applied.

hi community, i have a vodafone station wlan router/ modem and want to setup a spare pc in order to run sophos xg home. is there a possibility to run the sophos xg parallel (behind) the wlan router in order not to change the wlan router settings?…

Hi, I have been struggling to get transparent birding to work with VLANS properly. I have two ports bridged, one as LAN and one as WAN in bridge mode. VLAN 1, which is native seems to be working ok. I have another TAGGED vlan, vlan 3, which kind…

Long story short, I was attempting to enable a separate access point to our office XG Firewall, and I changed one of the port interfaces by adding WAN as an option. After doing this, i cant reconnect to the web admin portal via HTTPS and revert the setting…

I'm running Peplink router with 2 POE APs, multiple SSIDs and Vlans. Deployed Sophos XG in bridge mode between the Peplink router, and POE switch. WAN/LAN connections from the Sophos are both connected to trunk ports (any vlan). My bridge interface…

I have a Draytek router in bridge mode connecting to a xg106 firewall. The router is set to 192.168.0.1 and the XG 106 is configured to 192.168.1.254. I need a rule to allow me to navigate from the LAN to the bridged router. Can anyone help.

Hello, DHCP request packets doesn't seem to be transmited throught bridge interface. I created a bridge with 2 ports : 1 classic physical port and 1 VLAN port on an interface. DHCP server is in the LAN connected to the classic physical port (on this…

Hello All, Since upgrading from 18.0.6 MR6 to 18.5.2 MR2 the Wi-Fi SSID associated with the LAN zone via a bridge has stopped working. I have attempted to create a new bridge however it's not possible to adjust the members of the old bridge, the gui…