I have a setup where branch offices uses resources and services from head office . Our ISP requested we do BGP configuration for better performamce of their service. After the configuration and connections established, branch offices are able to use…

I work for a small university with a main campus and a single, annex building which is off-site. I have configured a XGS 2100 with an IPsec tunnel between the locations, which is working great. The problem is that I have no internet traffic from my LAN…

hi all, want to make WIFI traffic go out a new WAN interface, i think im going to do it like this, what you think network > interfaces network zone WAN, add ipv4 details and give it a gateway ip rules and policies > nat rules "default SNAT IPv4" change…

Hi we have two new XGS2100s in HA that have replaced an XG230 On the older XG230 under OS 18.0.5 we had problems with printing from a web server externally to our internal Star CloudPRNT enabled devices (over TCP443). They are very sporadic and…

So here is the deal - I have an entire network of devices (switches, APs, computers, laptops, servers, printers, IoTs) that was all built on a /16 subnet using public IP space and it is all just using default VLAN/VLAN 1. 176.100.x.x/16. It is slow…

Hi, I have the the following setup: Office FW (10.1.0.0/24) <==Policy based ipsec==> DC FW (LAN: 10.2.0.0/24; SSL-VPN: 10.3.0.0/24) <==Route based ipsec==> Partner FW (172.20.32.0/24) I try to announce the routes for the office (10.1.0.0/24),…

Hello, hope all of you are ok. I need help with something. I have 2 sophos, XG310 and XG210, on firmware 19.5.0. Both are in a buildings complex and share a LAN segment. One has GW 10.10.10.1, now Sophos 1 and the other one has GW 10.10.10.2 now Sophos…

Hi Team, We encountered a problem wherein customer needs the following: 1. Head Office will route their internet connection to Branch Office once they experience no internet on the site. 2. Vice versa, Branch office should route their internet connection…

Good day Team l have just deployed a firewall XGS 2300 The network has 5 branches which are connected using GRE Tunnels. The communication from branches to HQ is working fine. We have a problem with the communication from one branch office to another…

Hi Guys, This is our network setup. We have couple of websites and Microsoft Direct Access server sitting on our LAN to access resources from outside . Currently we have PFSence box and all working without any issue. With Sophos no luck. I appreciate…

Since upgrading the firmware version, a couple of devices have been blocked from sending traffic between the subnet 192.168.1.0 and 192.168.2.0. I have set up rules to allow traffic to and from the devices but still unable to ping. the device in…

Hello Everybody I have a new problem with my installed Sophos Firewall Firewall XG115 (SFOS 19.0.1 MR-1-Build365) LAN Subnet:192.168.200.0 Mask:255.255.255.0 GW:192.168.200.1 VLAN 10.20.1.0 Mask:255.255.255.0 GW:10.20.1.1 To be able to configure…

Hi all, I am in the optics and the reflection to start the project of segmentation of my local network. i have xg 330 as edge firewall Si i think about to methods, go with L3 switch for inter-vlan routing or don't make L3 switch and do all the segmentation…

SCENARIO : Sophos firewall IP : 192.168.177.254 Vodafone Router IP : 192.168.80.1 - Internet How do i configure vodafone on sophos in other to get the public IP to use for my VPN connection.

Hi there, can someone please tell me where I can find the equivalent of Zyxel's Policy Route

Hello, I have this network architecture , And my goal is that the VLAN100 (with Network IP : 192.168.123.0/24) to have access on my Server 172.20.24.24 So , I create this Route on my Sophos Firewall ( version XG S3300 firmeware 19.0…

Hello Everyone, one of our customers has a phone system (Panasonic KX-NS700) that uses multicast to synchronize the Cell-Stations (KX-NS0154). The Cell-Stations (DECT) use PTP for synchronisation.There is one Master and several Slave-Stations. Although…

Good morning everyone, i'm trying to implement BGP over RBVPN, neighbors are up only when i add the comand disable-connected-check and if i use the comand maximu-path 20 they cannot establish, any advise? Also with the comand disable-connected-check both…

Hello everyone, How do i create a static route pointing to null0? I need that route to be a summary route so i can advertise it in bgp. Many Thanks, Dragos

We have 3 internet links; I want to route the web-based system (URL) through one of the WAN links. Please advice on how the routing should be configured. Whenever the user click on the link, it has to point to the dedicated WAN link.

We have a location where we have Sophos XG106 Firewall serving as Gateway. We have one MPLS link on the location. We are facing issue when we shift / redirect traffic on MPLS link to connect to HO. Static routes are working fine. We are able to reach…

Hi, we have a client, We created a VLAN on a MPLS VPN for a site branch to access the internet from the head office. We have two branches connected under the same VLAN ID. the other one is working successfully, but the other branch is connected but…

Hello, I'm stuck on a LAN routing problem. We changed our UTM firewall to XGS116, I recreated the rules and configuration on the new firewall, but I have a problem with the incoming traffic to the internal network. We have several offices that are interconnected…

Hi, I have a networking related question. I'm not sure if it's a configuration issue on the Sophos firewall. I have a Sophos XGS 136 appliance with a number of physical interfaces configured with the following IP addresses: 192.168.100.1 and 192…

As I've worked through some (not all) setup issues, one that continues to stump me is the fact that when my NAS is connected to switch along with all other LAN devices and incoming internet from router, life is good. I can access my NAS no problem. …