hello. Sorry for my poor English. I was thinking of connecting LAN cables to multiple ports of the XGS136 to create one LAN like a regular router. ex) port1=WAN port2~port10=192.168.10.1~192.168.10.255 Assign default gateway 192.168.10.1 to…

We have set a bridge on ports 3 and 4 to plug the Aruba 2930 switches in parralell vs daisy chain, the bridge works as expected except we had an issue with printers. the pritners connected to port 3 work, but the printers on port 4 stop connecting, has…

Dear community members! We are planning to insert an XGS firewall into our existing network infrastructure with multiple WANs. This is the current setup: Three WAN routers from different ISPs with fixed public IPs are connected to a multi-WAN router…

Good day everyone. I need to configure something on my XGS136 and can't seem to get it down. I have a 1gb/1gb fiber coming into a vendor device currently. I am going to move it to PORT4 of my Sophos using a public IP, and then need to share it back…

Hey, I am stuck with removing an interface from br0 on XG115w (SFOS 19.5.0 GA-Build197) I was trying to remove one interface from br0 and apply changes. Now I can not edit any details of the br0, the UI stuck in an infinite load cycle when I open…

I have implemented my sophos firewall in bridge mode. I have access to the internal devices, but I cannot access the Internet, what needs to be done to access the Internet? I was trying with a firewall rule but it didn't work.

Hi all, User Kyle Sexson had this issue a while ago, too, but there’s no solution in his post - so… I have a set of VLANs running on a bridge interface. This works mostly well, but certain outgoing traffic will show up both on the bridge interface…

Why is not possible to create GRE tunnel on bridge-interface (WAN port + DMZ port ) ?

Hi all, setup is router -> Firewall -> Ubiquity dream machine. XGS2100 is configured in gateway mode (need to use SSL VPN), wan cable to port2, lan cable to (F1), lan cable is connected to an Ubiquity Dream Machine PRO. In the F1port there…

Hi - I have a Sophos XG 135 and I have set up two different networks with different Gateway IP addresses. Port 1 uses 192.168.1.1 Port 8 uses 10.150.121.1 Port 2 is the WAN port I would like devices associated with Port 1 to be able to communicate…

Hi, I thought creating a Bridge on XGS-136, for example, creates a "switch" between bridged ports, but either I do not understand principle, or reality does not follow the principle - I found no, bridged ports do not behave like switched ports. For…