I have two clients that use the same ISP. One client has an XGS87 and the other XGS116. The ISP does scheduled maintenance at night knocking the firewall offline. My clients will have to power cycle the firewalls to get them to connect in the morning…

Hi all, Sophos XGS SFOS 20.0.2 MR2. When I try to check a ping: It only accepts IP Addresses or names without capital letter! I can resolve blabla.domain.local but not BlaBla.domain.local "Please enter a vlid IP or hostname". Is that bug or…

1 Firewall 2024-10-26 14:10:51 Appliance Access Denied N/A 0 PortA1.10 10.10.1.3 10.10.1.255 137 …

Hi all, I have several SFOS V20 in place. I can nomore add an ip network: "You must enter a network IP address." There is not much room for making things wrong and I did this couple of times before. No problem to add an ip host but no chance for…

What is everyone's experience with WAN link load balancing in v20? We're a K12 private school with two identical WAN links from different ISPs, Frontier and Comcast. Our goal is to enable WAN link load balancing in an active-active config, weight 1 and…

I am referencing this documentation https://docs.sophos.com/nsg/sophos-firewall/19.5/API/SYSTEM/Host%20and%20Services/IPHost/operations/AddIPHost&EditIPHost.html There's information on how to add or update an existing IP host object. However, I just want…

SNAT with multiple WAN gateways isn't working.. WAN Gateway 1 = Port3 - its public with /27 worth of aliases WAN Gateway 2 = Port5 - its public with /28 worth of aliases (IP Host) SNAT with Port3 aliases work for all of the rules I've created…

Hello All, We have a Sophos XGS connected to a metered WAN connection, in order for devices to connect to the internet the user must authenticate to the Sophos captive portal and at which point a weekly data transfer quota is applied. This has been…

Good morning. I have been looking for information about the use of Traffic Shaping / QoS and applied what is indicated but in my case it is not working for me. I have 2 offices, each with a Sophos firewall. The server in office A sends data to the…

Hi, we have a problem with transferring syslog from Sophos firewall to the Arcsight SmartConnector. When we try UDP, logs can be seen in connector. However, with TLS communication fails. This is only example, but ours handshake also fails at Change…

Hi Configured one more WAN IP in the Sophos XGS136, link is up but traffic is not moving through new link, checked load balancing, everything is looking fine Pervious link is working fine, however the new link is not working, able to ping 8.8.8…

Hi, not a huge problem, but I cannot find logic behind. I have XGS-136 in main office, and from there I monitor with PRTG 2 distant branch offices, which both have XGS-87. Interesting, that both branch offices experience increase in PING latency at…

Hi Sophos Geeks! I'm having a problem accessing my WEB Application using Public IP in my local network but working if I'm accessing it externally. I already configured the DNAT policy Source zone in Any Zone but still no lock. Currently my version…

Hi there, since some days, we encounter Bruteforce-Attacks against our Mainfirewall (Sophos XGS): Access from IP address '92.53.xxx.xxx' is blocked for '30' minutes after '5' unsuccessful login attempts I've tried to block all requests from…

Hello, we also have 2 DVR devices in our network. I can access it via HTTP (Web). I cannot reach the second device. It seems like it is going to log in to the second DVR device, but it doesn't. It gives ERR_CONNECTION_REFUSED error. I tried many things…

Hi everyone, I have some problems with the STAS service. The picture shows the topology: I have two locations, the HQ with an XG210, and the branch with XGS136. Both are connected through a VPN tunnel. The STAS server is in HQ location. The communication…

For firewall rules that allows access to a sensitive system (host) and where access is usually not required all the time, it would be nice to have a feature to enable them manually when needed but with a timer that disables the rule after 60 minutes or…

Hello everybody, Just new to the forum so please be gentle. I have 2 WAN's on Port 3 and port 6 What I wanted to do is put the guest and staff wifi to use the connection on Port 6 instead of the main connection on port 3 I made firewalling…

I want to drop the connection to my Sophos SG 310 from one country for example Xcountry. what must I do Thanks

Hello, I would like to create a DNAT and PAT rule for a customer. However, this doesn't quite work the way I want it to. When saving, I always get the message ‘Original and translated services do not match’. Normally I would also like to use port…

Hello there, I have been searching long time to do the following with Sophos XG 230 Firewall. But still could not find solution. Can anybody help 1. Block Microsoft 365 One Note alone. Rest of the Microsoft 365 should work. Blocking One Note on Application…

Dear tEam, I cannot allow traffic from an external ip and a specific port to my local server. I tried differents things but it doesn't work.

I have been having an issue where my smart tv hangs when apps first start up. It hangs for...several minutes sometimes. Checking my firewall logs, this is the reason, and after the several minute hang, everything works, which makes sense since it's now…

I have an XG330 running 20.0.2. I'm trying to configure BFD+BGP. The BGP portion works great. However, the BFD portion does not. I enabled BFD from the CLI. The following is what my BGP configuration looks like from the CLI: Current configuration: …

Hi, what would be the proper way to configure different WAN ALIASES for outbound traffic, for example in this manner: LAN users would use WAN Alias 1 for browsing and accessing web LAN2 users would use WAN Alias 2 FreeWiFi users would use WAN…