Hello all, I have created two new zones on my Sophos and would like to have communication between them. I have already created the firewall rule and selected zone 1 as source and zone 2 as destination. Unfortunately I can not get there into the other…

Hi, Is it possible that customer that have 20 firewalls managed on sophos central create template and apply to all firewalls. Is there any detail documentation about how that works? Regards,

Dear All, Would like to seek for your help, i have the following firewall rule from Sophos 17.5, i would like to create the same rule in Sophos version 19.5, how do i create it under firewall rule + NAT rules for the following ? any help would be…

By default, the agent's port is 161 and the manager's port is 162, but many internet operators here in Brazil leave this port blocked, which makes it impossible to access the firewall's SNMP. How to change this default port?

Hi !! im having a problem whit my SSL VPN´S, i have my SSL VPN whit the "USE as Default gateway option on" In my NAT rules i Have my SSL VPN doing MASQ to original, and in firewall rules i have permitid the SSL VPN to access my LAN´S and the WAN on…

HI, if it possible to enable/disable firewall rules via cronjob. The customer wants certain firewall rules to be deactivated every evening, the rules are activated manually upon request. I was able to do that on the SG, it was possible to turn on…

Hello guys, I have IPsec Tunnel Site-to-Site with this lans: 192.168.22.0/24 192.168.26.0/24 On the lan 26.0 i need to reach 1 machine and that machine got the ip 192.168.22.140. On diagnostic of firewall i can ping that machine but on CMD…

Hello, i have issue with v19.5 , i have server in DMZ zone there's a connection between the server the other in other subnet and i made a rule for this, and working fine, and there's rule LAN TO WAN for this server , the problem is when i create SD…

I need to route a single host through a WAN that is not the default wan. In the previous firmware version I just had to create a firewall rule and specify the gateway, but now...I'm lost. I've followed this article Sophos Firewall v19: How to Choose…

Is it possible to display only those firewall rules that have this setting for user/group "Any"? I could not find a filter that worked. we're on SFOS 19.0.1

I'm trying to access an FTP server located in our Server Zone from our DMZ Zone (passive mode). When the server initially responds from port 21 to the initial connection, the connection is being blocked by Sophos XG - "FTP-bounce attack" but I have…

Dear All, I currenty running a virtual sophos FW in esxi with version 19.0.1 MR-1-Build365, and i already have another internet gateway which using palo alto, this sophos i want to act as Internet Proxy, in client computer its will need to have below…

Good day Team Using Sophos XG 310 V19 Users are not able to access a service using the SAP business, outside the local area network, using the SAP router. We use code nwbc. We have created a DNAT for the server. we getting the error below

Hello I have SOPHOS XG 19.0.1 firmware which i have upgraded version due to facing issue, one web which was working earlier suddenly stop to work and not getting access from the public network. I took support from tech, but they also not able to understand…

I'm migrating from Sophos UTM to Sophos XG ( SFOS 19.5.0 GA-Build197 ) and I cannot get my work machine, which uses MS Alwys-on-VPN, to conmnect when I switch between the UTM and the XG. On the XG: Port 1 is the LAN, Port 2 is the WAN. I have a work…

Hi there, I'm struggling with a problem that i don't really understand. In the DMZ is SFTPGo App, which provides a FTPS server. From external (NAT) through port 21, works TLS or unencrypted connection. From internal, although test LAN DMZ to SV is set…

After adding firewall rule to allow protocols , Bitdefender vpn clients on desktops still fail, live logs show no blocking of the protocols after the rule addition also? Has anyone experienced this issue previously and resolved it?

I have a synology server at home with adguard home. I created the rules in sophos xg (I think I missed something) because when the lan connection uses the ip of the synology server where adguard is, I can't access the website, when I change the dns server…

Hello I have searched and can see others have this issue, however none of the solutions have worked for me so far. I have followed the steps at https://docs.sophos.com/nsg/sophos-firewall/19.5/Help/en-us/webhelp/onlinehelp/AdministratorHelp/RulesAndPolicies…

Hello, I'm using XG135 with latest firmware SFOS 19.5.0 GA-Build197. My fw rule for outgoing traffic to Internet like this (rule ID 10): When I look into NAT rule, I see that the SNAT rule for outgoing traffic to Internet has the number of usage…

Hi, We have just started using Sophos FW and having some difficulties creating Rules. We have two vLANs vLAN10 and vLAN20. We need to allow vLAN10 to have full access to the internet whereas vLAN20 should have a whitelist, i.e. access to few websites…

Hi, I'm new with this equipments, i'm trying to configure VLANS between two equipments (SOPHOS -» Switch) SOPHOS: - WAN - DHCP from ISP router - LAN PORT1 IP: 192.168.100.1/24 - ZONE LAN 1.10 - VLAN 10 - 192.168.10.1/24 - PORT 1 - ZONE…

Public user are accessing local URL (http://117.x.x.x:3000) successfully, but internal LAN user (192.168.16.10) want to access by public IP , but cant access URL : http ://117.x.x.x:3000, what is the solution,

Hi, I need to tidy the unused rules (63) However can I just delete them? As I am not sure whether these are connected to other processes, it's the same for the NAT rules.

Hello, I've been detecting a strange behavior on an xgs 2300 (SFOS 19.0.1 MR-1-Build365) for a few days. At first the connections of some PCs to an IP seem to work but then I start to log a series of errors such as "Invalid traffic" (I attach a screenshot…