What is everyone's experience with WAN link load balancing in v20? We're a K12 private school with two identical WAN links from different ISPs, Frontier and Comcast. Our goal is to enable WAN link load balancing in an active-active config, weight 1 and…

I have a dual WAN setup, for this example, I'll call them A and B. A is my primary WAN, and B is my failover backup WAN. A uses starlink, and B uses a local ISP. I use another app to monitor pings to my ISPs to see if they are up. Unfortunetly…

Are there any known issues with XGS and Starlink connections? We deployed a Starlink this weekend as a replacement for a traditional satellite service, but found that after a few minutes the connection stops passing traffic, with WAN link manager reporting…

Hallo @all, at the moment I have 2 WAN gateways (default gateways for all my networks): WAN GW 1 (active) WAN GW 2 (backup, will be active if GW 1 is failing) What is the "right" way to add a third WAN Gateway (independent from the other 2 WAN GW, without…

Hi, Does anybody know what the OID and name is of the XGS WAN link manager is so I can monitor this with SNMP? I'm having trouble finding it in the MIB files.

Hi All, Scenario: XGS 136 firewall with two WAN links [Wan1 and Wan2] Server/URL on the Internet that has a static IP [x.x.x.x] Single LAN for the internal users Requirement: LAN users to use WAN1 for general Internet traffic LAN users…

Hello, I have two different gateways as follows: 1: ISP (pppoe) 2: Wireguard (192.168.1.10) I have a rule that forwards specific destination fqdns/ips via wireguard gateway, nat rule with translated snat as Wireguard (192.168.1.10). Everything…

Ii have to internet One airtel and the other is jio SBI site working on Airtel but when I turn on jio sbi site trum off This is happening on sophos xgs107 firewall

Hey everyone, I'm just wondering what weight is meant to represent when it comes to a backup gateway? Is it a percentage thing? Meaning if the primary gateway goes down, the backup will handle 20% of traffic?

Hi all, I am using sophos XGS87 firewall with latest firmware version (SFOS 20.0.0 GA-Build222). I am facing issue with load balancing. Load balancing was working fine till yesterday. But today it is not working all the traffic is passing through…

Hi, I need help with two things. Firstly, regarding WAN link manager. We have two ISP to us. ISP-A being primary and ISP-B being secondary usage (Both ISPs are Active type, there are no Backup type). ISP-B status is always displayed as Inactive. I am…

Hi. I am having what seems a very basic issue getting my WAN connection connected to Sophos Home Firewall version 20, I'm hoping someone can help? I've found various posts regarding this over the years but am still unclear exactly why it's still an…

Hello everyone. I had some trouble setting up the XGS136. I have set up an IPOE connection, but the gateway is not enabled. I think this is the reason, but I can't connect to the internet. I have the settings as shown in the image, but is there something…

I Have configured 3 WAN links and all are active, i have also assigned each WAN link to unique LAN network, the links are working well but when i do speed tests i receive a mix up of public IPs from the ISP

I have the static IP from the provider. They said there was no gateway, subnet or dns, just APN. I'm looking to connect this similar to a WAN interface for a circuit. I know we have to setup the router as a bridge/pass through. I need the firewall…

Hi, we are using SOPHOS-XGS-3300 now we have 2 internet lease line connection we are planning to add one more lease line any issue we will faced if we add more than 2 . TATA-500MBPS ACT-300MBPS after upgrade ILL TATA-1GBPS ACT-300MBPS JIO…

Hi, I have XG230 it shows that the wan port is down (Status is Red) however the connection is up. Appreciate any comments

Hi everyone, There is a wan1 and wan2 line on the sophos firewall. Wan1 should work during the day and wan2 at night. How can I do this?

Hello everyone, I have a Sophos Firewall behind a Fritzbox 6591. The Fritzbox now serves only as an internet interface. The Sophos is running as a VM on Proxmox and is also set up as an Exposed Host. My issue: The firewall loses its connection to…

Good morning, I have two clusters of XGS 2100 in HA (Active-Passive) running with the firmware version 19.5.3 MR-3-Build652 . This is my current setup in both of the clusters: WAN1 (ISP) > Port2 LAN > PortF1 HA > PortF2 - PortF2 As per object…

Hello. Wondering how to block DMZ traffic when in WAN failover mode? Have a cable internet connection as primary/active WAN and a DSL connection as backup/failover. Would like to automatically block all DMZ traffic when the primary interface goes down…

One WAN Link weight is 1 and another WAN Link weight is 3. Which WAN link is priority and how traffic is load balancing?

If you are having trouble with one of your WAN links, disabling it for troubleshooting would be very useful. Why is this not possible? I've been on calls with SOPHOS Engineers where we needed to do this, and it they were frustrated not being able to.

Hallo, wir haben einen Lancom Router von der Telekom (Der aktuell nur als SIP Port für unsere alte Telefonanlage dient), der in unsere Sophos aktuell nur als WAN Gateway Backup mit Failover eingetragen ist. In der Sophos steht er mit 20.251 auf einem…

Added second WAN zone network port5 ipv4 192.168.101.2/27 gateway ip 192.168.101.1 SSID new network DHCP Firewall Rule WAN link manager information able to connect Tablet to Wifi and i get DCHP release result block firewall…