Hello, I'm founding difficulties determining if the XGS 3300 firewall can support a 2gbps throughput in a HA cluster with 2 equipments. Can someone help me? Also if it has a firewall throughput of at least 37 gbps; a ips throughtput of at least 13 gbps…
Hi all,
Since SFOS 19.5.2 MR-2-Build624 we now have 3 customers so far, some with HA setup and others with stand alone, that the firewall suddenly stops and all the network interfaces are off.
The LCD panel on the front shows fw status, but none…
Customer has a XGS 3300 in HA, last week we tried to update to new firmware 19.5.2 (installed is 19.5.1) and that didn't work.
After investigation we discovered the Auxiliary unit didn't response to anything than a hard reboot. After the hard reboot…
I have setup XG firewall on HyperV all is good, but when I am doing MTR to WAN IP i am getting
2.|-- ??? 100.0 10 0.0 0.0 0.0 0.0 0.0
Also the speedtest result i am getting 50% of ISP speed, please help
Thanks
I have site-to-site connection from office to AWS VPC 1 another one from office to AWS VPC 2, using a firewall XG230 in office, what can be done to create a communication between AWS VPC1 and 2.
I am migrating our current software UTM firewall to the software XG version but I find it hard to decide how much memory I need in my license.
At this moment I am on the trial license with a vm that has 8gb memory.
For the UTM the 50 ip license was…
Hello !
I have problems setting up dual NIC config for my XG instances - I just want to create an LAN NIC (10.50.0.0/19) and a WAN NIC (10.50.32.0/19) for my Sophos XG instance in Azure. If I deploy this directly in Azure via the GUI, everything works…
Hello! Can anyone confirm that I understand this correctly: There is no way to get Active-Passive or Active-Active HA working in Azure with 2 XG instances as Azure does not support MAC spoofing.
Manually configure HA in Azure - Sophos Firewall -> since…
I have 4000 clients. Need to create individual VPN tunnel for secure communication. Firewall should be hosted on AWS.
Which SOPHOS product would be suitable?
Hi all,
I am trying to setup Sophos XG on hetzner cloud from iso i followed almost same process like azure But i am getting error its not pining network even Internal gateway please help
Thanks
Partha
Hello all,
I have a few questions for the sophos firewall solution in azure.
I followed the guide setting up the firewall with a WAN and LAN Interface.
WAN is 10.0.1.0/24 with 10.0.1.4 as NIC private IP and a public IP assigned by Azure (example…
I use a ZBOX CI 323 with XG 17.5, which works flawlessly, but I can't upgrade to the newer 18.0, since this version will not recognize the second LAN port on the device, which is used for WAN access. Using a USB LAN adapter also won't work. Anyone have…
Hi,
I have the same question make into the UTM Firewal Forms postet, but don`t get a answer. So I try to post my problem here into the english Forum. I have a question about the Sophos Firewall and specifically the bridge there. I have virtualized by…
I have been running SFOS on fanless i7 hardware with spinning disk for a year or so .. My hardware supports NVME drives ... is it possible to install this on an NVME drive yet so that I can remove the old spinning drive from the hardware? I got past the…
Hi,
I have a virtual Firewall v17.5 on a dedicated OVH ESXi Server.
the WAN gateway is not on the WAN subnet
This article explains it quite well
community.sophos.com/.../using-xg-on-ovh-dedicated-server---general-routing-issues will it still work…
Hi,
I'm running a SG230 with Sophos Firewall OS for a home setup and I am very pleased with the functionality.
Unfortunately I do not have a lot of space at home and am running this machine in a switch rack located near my desktop PC.
I think…
Hi everyone,
I hope this message finds you well. I am reaching out to inquire about the compatibility of the SOPHOS 3300XGS , SFP+ module with the Switch HP 5820X-24XG-SFP+.
We are currently evaluating our network infrastructure and considering using…
He there, yesterday, we had the third hardware failure in three years with a defective SSD on a Sophos XG 230 v2. And when i look at the forum here, i am not alone. This is now only "one" example of another concerned. (+) Sophos Firewall: v19.5 MR1: Feedback…
Hi I try to setup a virtual sophos as firewall (SFOS 19.5) for my VM in a private vlan et also give access to remote user/site using vpn version :proxmox 7 eno1 -> vmbr0 (public IP as management on ovh infrastructure) eno2 (connected to the vrack service…
device : XGS 2100
Please help to find a solution to this problem, the device does not work after being connected to the ac power and after pressing the power button note : no data appears on the device screen and t he power cable has been changed
Good afternoon,
I'm encountering the same issue as described in this thread: Lack of critical component in KVM images
I have a Proxmox install of Sophos XG Firewall. This install was done using the installation ISO. The hypervisor hangs when restarting…
Il try thé last version of firewall on proxmox v7
Thé firewall doesn't Boots on qcow2 primatry disk extracted from de downloaded Zip file.
Il use as OS configuration a linux and the défault bios proposed by proxmox. The Boot ordre IS correct.
IS…