Good day How do l configure wireless expansion modules on a XGS 136 firewall. Have done all the wireless settings on the firewall

Just for my own curiosity, what is the difference between those two hardware models? Project Z136- 0.07 x64 Project Z136- 0.08 x64 faulty rma The faulty device has no network connectivity on Port 10,11,12

hi i disabled secure boot and then did a fresh install on an nvme drive it stucks on boot "booting 21_0_0_169" any info or help appreciated thanks

Good evening, I got an old Sophos XG86w that is out of support, the status LED often shows an error (red). Otherwise it is running properly so far. This also happens in the BIOS, i.e. OS has not yet started, so the BIOS of the XG86w seems to find an…

Hi, after upgrading several software deployments from SFOS 20.0.0 to 20.0.2 USB Keyboard is not working! - Tested with 2 different Intel Hardware Settings - Tested with Upgrading vom 20.0.0 to 20.0.2 - Tested with new depoyment 20.0.2 - Tested…

Hello everyone! I'm new on this forum and hopefully I can become your friends! [Hopefully] I just getting started for using Sophos firewall with this [Mine was HP T620 Plus] But I will call them "Amaterasu" during deployment. I know the Sophos Firewall…

Hello, for the connction to my fiberglass provider i need an sfp module with following connection feature: SFP, LC-Simplex, 1000BASE-BX-D, Singlemode. I cannot find one in the compatibility list. Which is compatible? https://www.fs.com/de/products…

Hello, We currently have a XG230 (SFOS 19.0.1 MR-1-Build365) which I was told are no longer supported by March 2025. What will happen if I don't replace it will the firewall stop working?? Thanks for any help

We just purchased a large number of XGS136 and XGS116 firewalls to replace all of our customer's firewalls. We have noticed that all of them are much louder than the previous XG135 and XG115 firewalls. I have see multiple reports of this noise on this…

"After the 20.02 update, all XG 116 firewalls started excessively consuming RAM usage, even in environments with low traffic and queries. I have already opened a ticket with Sophos, but they don't have a solution for this. Is anyone else experiencing…

Hi, I am trying to understand the root cause of my Sophos XG 20.0 MR3 appliance restarting on average of 1-2 times a week. SYMPTOMS : Multiple devices lose connectivity to the gateway (the appliance) at the same time - pings do not respond for about…

Hello I struggle a little bit atm. I had sophos home virtualized on something intel N with 4x2.5G running proxmox. The thing had no legacy BIOS (sadly) so this was my only option. Then I got a SG230 cheap and I installed a intel 10G nic (x520-DA2, 82599ES…

Hi Good Day for all i have issues in my firewall xg125 firmware SFOS 20.0.2.MR-2 Build378 device CPU always is 72% and sometime be 90% and 100% i do everything to solved this problem but still not solved and i following this topic https://support…

Hello. We are using XGS116w right now and wondering which models supporting 10Gbps WAN. I saw that 1U devices have SFP+ modules but inside the SFP+ supported list, there are no tested RJ45 modules that would work for 10Gbps. https://support.sophos…

I've got a XG 125w rev 3 in production, that's licensed until 1/3/2025. I expected to replace it sometime in December but I've been seeing some rather odd behavior from it in the last 3 days. -The web gui from the LAN and from Central is even slower…

After safely powering everything down to do some unrelated maintenance, Before everything except ant-spam was all working fine. Upon restart the computer I had XG running on partially booted with a blank screen and higher than normal fan for about 30…

Hi all, Could you pls share the specification of the model XG230 and XG320. Then If XG230 service support will gone on next years? what model should upgrade ? Thanks you all.

Hi can you tell me why our Sophos is consumming too much memory ? No ssl inspection is configure. Even we unplug all network switchs, the sophos memory is + 80%. Need explanations

can you please help me I'm having an issue regarding SFP connection of the Sophos firewall, brand model xgs 2300 i implement sub interface in the SFP port of the firewall all the rules and policy are correct i even test the internet connection it is working…

Good day all.... Does anyone use a Sophos XGS 87 and experiencing that the Firewall is getting very hot after shot time? My FW is running 30Min now and is already producing great heat, and I am just configuring the settings at the moment. THX for…

Hello people ! I am currently in possession of a XGS 136 that I just bought, and I want to make sure that it hasn’t been modified or tampered with any kind of hardware modification or software change. For that I wish to know if there is any way…

I have a Trigkey G5 minpc with dual Intel NIC. I am unable to install SFOS 20 and can only get as far as the *SFOS Installer prompt then it just stays on a blank black screen. Anyone had any success installing SFOS on this device, how did you do it…

I have an XGS 126W. It has been sitting in a closet since end of 2022. At that time it had all the updates installed, not exactly sure what version. Now what it's out of the closet (no pun intended), I can't connect to it. No matter what port I connect…

Following up on this locked post: Rack Mount Kit for Sophos XGS 126 SKU: RMXZTCHAB P/N: XGSDT2RMPUR Yeah, you're right. Some [not so] clever person probably thought it was wise to put screws non-symmetrically on both sides of the router so you can't…

Hi Community, Is there a way to clear memory (RAM) without rebooting in Sophos XG firewall? its firmware is SFOS 20.0. 0 Memory went up to 90% last week. We rebooted the Sophos XG firewall. Then, Memory came back to around 30%. Now it has been running…