Att fiber the wan interface is a 5gbe to a 10gbe card on my firewall. However it is not negotiating a 5gbe connection; rather only 1gbe. Anyway to enable 5gbe for this connection? 10gbe is available as a manual selection, but not 5gbe. Using an intel…

Hello I have struggled for a while with this. And all while having serious network issues with Comcast. I have Comcast and AT&T as ISPs - and for background, I have forced their Internet cable modems / routers to have a base IP address in the 172.16…

Hi, I'm using SOPHOS XG HOME SFVH (SFOS 18.0.5 MR-5-Build586) and Currently, we have 3 ISP links. What I need to do, is two ISP links should work as a load balance and One ISP link should be dedicated to another VLAN. How can I do this, Please help…

Hi All I recently picked up an XG125 as I wanted to install XG home on it, which I have done, but port one (lan) and port two (wan) have no activity and I am unable to connect to the device via https://<IPADDRESS>:4444 Has any had any success with…

am working on installing the XG home firewall and was wondering where the quick start guide is. I am looking for the default IP address and password that is needed also a guide to the basic set up of the interfaces and should be set up for DHCP server…

So, still in the middle of migrating from UTM9 to XG and experiencing growing pains. Totally retooling my network and I am having trouble understanding a problem that I have run up against. I have a managed switch that I have my wireless VLANs on (ports…

Hi, would appreciate some help. I assign IP addresses to all devices at home. I would like to allow a list of IP hosts on LAN to be able to access the internet WAN at any time. I want to be able to easily add or delete IP addresses from this list. So…

Hi Everybody, I'am using the following configuration: HYPERVISOR-Hardware: LENOVO THINKCENTRE M70Q i5-10400T 256 GB SSD 16 GB RAM 1 LAN integrated LAN-Port 1 UGREEN USB 3.0 Nics (ax88179_178a 2-1:1.0) HYPERVISOR-Software: Proxmox…

The server I have in my lab has 4x10G SFP+ and 4x1gbit ethernet built into the board. Sophos is detecting the 4xSFP+ and only 1x1gbit. Is there anyway to force Sophos to see all 8 or have it ignore the 4x10G SFP+? It looks like Linux under the hood but…

I have a device with 3 ports, Port 1 is 172.16.16.16 and works, hands out IP addresses OK. Subnet is 255.255.255.0 Port 2 is WAN, working OK Port 3 in LAN, tried Static IP, DHCP but it will not hand out IP addresses. Tried adding DHCP, but…

Hello, I have replaced my EE router with a TPLink AC2800, but keeping the EE router as a backup. I want to setup a Sophos XG firewall at home in router mode and have put the TP-Link in bridge mode. Do I need to put the VLAN into both the TP-Link and…

Hello everyone. I just installed Intel PC base Sophos XG home firewall in connexion with ASUS routeur as Access point, to control the web/app contents and internet access time of my kids. However I can't figure out why the scheduled time based firewall…

Hello everyone if you please help me about this issue i m trying to solve. I installed vm XG Home Edition in Synology Nas but i cannot bridge the WAN with LAN. I want ISP Router to act as DHCP Server as it is, so my thought is to pass the traffic through…

I have implemented Sophos XG on an old computer. I am very happy with it so far. But I was wondering if it could address an annoying challenge that I am facing these days. I have a 5yo child who plays games on an android device, and those games are bombarded…

I was staging a Sophos XG(Software) using an internal network. Everything was working fine. However, when I change the WAN to a 4G modem with static IP and passthrough, I was unable to access the internet from the LAN or other subnet. WAN IP was correct…

I am swapping my pfSense with Sophos XG Home for lab testing. I am encountering an issue where the connection to my TrueNAS SCALE shows "invalid TCP state" in the firewall log. Ping works, but not HTTP/S and SMB. The firewall rule is set to All-ALL, with…

XG Home firewall is throttling my bandwidth. I was able to get ~900MB download on a speed test from my computer through the ISP modem (connected directly). When I was connected through my home router (wired) without the XG home firewall in the network…

I want to disable IPS service as i am not using it , so i manually stopping it every time i reboot Sophos XG . so how can i disable it from startup after reboot Thanks

I have migrated the settings of my (now end-of-life) Cyberoam device to a Protectli FW4B that is running Sophos Firewall XG Home Edition, latest version. Initially I was quite happy, but then I tried the EICAR.ORG testfiles, and those Test-Viruses were…