Hi There I recently acquired a second-hand XG115W. After wiping the SSD, I successfully installed the V20 HOME firmware on it. However, I've encountered this issue after the installation: Ethernet ports 2 and 3 do not function. I can see the activate…

Hallo Zusammen, ich habe eine Sophos XG135W. Auf dieser läuft XG Home. Nach meinem gestrigen Neustart, starten nun nicht mehr die LAN Ports. Beim starten leuchten diese kurz auf, danach gehen Sie aus und haben auch keine Funktion mehr. Weiß…

Hello!! In my home network, I have a mini PC with two ports running Proxmox and a virtualized Sophos Firewall Home Edition. I have purchased a mini PC with four ports to replace the one I currently have. While I wait for it to arrive, I decided to…

Hello everyone, I’ve included my home network diagram and Sophos configuration below. After setting up Sophos Home (on ESXi) in bridge mode with VLANs, I assigned a static IP address of 192.168.11.10 to the bridge port. However, this IP address cannot…

Hello, I have Sophos SG 330 Rev. 2, completely new. I have used a USB installer to install the community/free edition of SFOS. The installer went ahead correctly, installing OS on the local SSD, and the appliance rebooted. After I saw that the appliance…

Hello, My GPON ONT converter device is one without the DHCP mode (static IP 192.168.50.x). Once I have connected my Sophos XG firewall device with it for a successful PPPoE dial-up, I can no longer access it by assigning a static IP of 192.168.50.y…

Hi everyone, I set my Firewall Wan Port to 1000 mbps Full-Duplex with Auto-negotiated enabled. I thought the solution was to set the WAN bandwidth to 1000 Half-Duplex but there is no option (only 10 HD, 10FD, 100 HD, 100 FD and 1000 FD) My Modem (Vodafone…

Installed home firewall on XG 125w rev3. The software shows ports 5 and 6 as Port 1 (LAN) and Port 2 (WAN). It seems all of the ports are numbered wrong. Is there any way to configure the software to see the correct port numbers?

I had the same Problem with my SG-125 with XG Home and NetGear GS305E and I've googled it but found nothing useful, so I had to figure it out myself After wasting around 30m troubleshooting and testing I found the reason, which was extremely unexpected…

Hi, I have a XG home lic appliance setup in a virtual machine, and right now I have one nic for one Wan line. I want to add a new NIC so I can have a 2nd Wan line. I have two ISP lines coming in, one from AT&T, other one from Verizon. I found out…

Hello, I refueled an XG125 Rev 3 with the home version. Everything worked with the stick, but I only have only 2 interfaces. All other interfaces are dead, with the original hardware ISO all interfaces work. Does anyone have an idea of what that could…

Hi Sorry for the questions this evening. I have a XG 230 Rev 2 unit spare atm, tbh I'm not currently using it due to power consumption and noise. If I get my house cat6 wired as I hope to do, then it will be maybe pressed into service along with Aruba…

Hello World, Quick question. I'm looking at purchasing an Sophos XG 125 Rev 3 appliance online. This is strictly for my lab. However, I have a couple questions. 1. Will this appliance support my Gig speed internet? 2. Will the home license work…

Att fiber the wan interface is a 5gbe to a 10gbe card on my firewall. However it is not negotiating a 5gbe connection; rather only 1gbe. Anyway to enable 5gbe for this connection? 10gbe is available as a manual selection, but not 5gbe. Using an intel…

Hello I have struggled for a while with this. And all while having serious network issues with Comcast. I have Comcast and AT&T as ISPs - and for background, I have forced their Internet cable modems / routers to have a base IP address in the 172.16…

Hi All I recently picked up an XG125 as I wanted to install XG home on it, which I have done, but port one (lan) and port two (wan) have no activity and I am unable to connect to the device via https://<IPADDRESS>:4444 Has any had any success with…

Hello, I've just installed Sophos XG home on VMware Vsphere and it's just come up and running, but I can see that the LAN and WAN are autonegotated to 10 meg half duplex. Here is what the LAN side looks like from the Linux Mint laptop I have directly…

Hello, I successfully installed XG Firewall Home Edition onto XG 106 rev.1 hardware, not without great difficulty. Everything is working, but the "hardware" port assignments do not match up with physical port numbers. It was easy enough to get them…

The server I have in my lab has 4x10G SFP+ and 4x1gbit ethernet built into the board. Sophos is detecting the 4xSFP+ and only 1x1gbit. Is there anyway to force Sophos to see all 8 or have it ignore the 4x10G SFP+? It looks like Linux under the hood but…

So I have acquired a Sophos xg135w from my company after they replaced it last year and it's been sitting there unused ever since. I didn't want to pay out for licensing for a home lab device so have installed the home version onto it. Following guidance…

I have a device with 3 ports, Port 1 is 172.16.16.16 and works, hands out IP addresses OK. Subnet is 255.255.255.0 Port 2 is WAN, working OK Port 3 in LAN, tried Static IP, DHCP but it will not hand out IP addresses. Tried adding DHCP, but…

I was staging a Sophos XG(Software) using an internal network. Everything was working fine. However, when I change the WAN to a 4G modem with static IP and passthrough, I was unable to access the internet from the LAN or other subnet. WAN IP was correct…

Hi all My LAN port does not negotiate anything more than 100FD. If I force the LAN port to 1000fd, the port goes dead. I have connected the Firewall to a Switch that supports 1000fd and other devices negotiate 1000fd without any problems. Looking…

Good Day: I want to setup Sophos home firewall on a laptop with two ethernet ports. The laptop and ethernet ports meet the specs required. Before I go any further, I would like your help in answering the following questions: 1. I have a Netgear R6900P…

Hi all im struggling with my sophos XG Home that is installed on a Fanless bare bone pc with 4 NICs. My Principal goal is to set my router in Bridge Mode, herefor my ISP is sending me a Fritzbox because the standart router dont support this mode. Anyway…