Hello colleague, I have an issue with a virtual machine on Proxmox. My "local-lvm" is growing from the initial 6GB until it runs out of space, causing Sophos XG to stop working. I've cleared the Sophos XG report in the terminal, but it hasn't helped.…

Quick question: Do you have to have Sophos Hardware to make VLAN work in the firewall software? I'm using a mini pc running Sophos Firewall V20 and it appears when I set up a VLAN, it doesn't work. Followed the directions on how to create a VLAN but…

Installed home firewall on XG 125w rev3. The software shows ports 5 and 6 as Port 1 (LAN) and Port 2 (WAN). It seems all of the ports are numbered wrong. Is there any way to configure the software to see the correct port numbers?

What are the differences between the XG 125 revs (rev 1,2,3)? Would the rev 1 processing power be sufficient for a home network?

I've seen similar topics here, but none seem to quite work. XG Home VM, v20, with a pretty minimal ruleset. I'm really the only person on my home network. At some random times the VM will go to 90-100% CPU usage and stay there. This has happened at 2…

I’m looking for some advice for Hardware for the Sophos Firewall Home Edition. I’m not sure if I should use a vm or bare-metal installation. When I was looking for some hardware, I found HPE ProLiant MicroServer Gen10 Plus v2 with an Intel Pentium…

Hi, I,m going to install Sophos XG home edition to a Protectli vp2420, I know the 4 core and 6GB ram limitation but with 300mb/s internet bandwidth it should be enough. It would be possible to install Sophos in Raid 1 if I provide Protectli with 2…

Hi everyone I installed my Sophos Home on a Mini-PC but it does not shows my NICs up. specs Intel Celeron J4125 8 GB RAM 256 GB SSD 4x 2.5 GBps LAN (i226-V) Any idea what can solve my problem? Thx

Hi, I'm not sure if I have just locked myself out of using XG home firewaill because of an unexpected BIOS compatibility issue. My ancient PC (Pentium III) mobo died. It was running XG 19.x. Researching for microPC's (ServeTheHome, Tom's Hardware…

Does the newly released SFOS v20 support newer fanless PCs containing the intel i225 ethernet chips, WITHOUT resorting to a VM? I suppose this is a resurrection of the question that was answered in the negative for v. 19.x last year in Does Sophos XG…

Hi folks, built this XG test box on a XM a couple of days ago and proceeded to loose the password. Please advise how to reset a lost password on an XG installed on VM? Thank you Ian

Hi all, I recently got my hands on a used SG135rev3 appliance and tried installing XG home edition on it. After installation, I see in the commandline (via HDMI) that the appliance has succesfully booted up, but unfortunately the LAN doesnt come up…

hi I have a Cyberoam CR100ing firewall (1.6.3 MR-4) in my hands that I got from my previous job and I plan to install the new Sophos XG home edition OS on it since it is the most compatible with the hardware today. What happens is that the Cyberoam cr100ing…

I have some questions regarding deploying the Sophos Firewall Home Edition. Does anyone have any recommendations on hardware to use and to avoid? I would like to look into something small and compact if possible. A plus if it's easily mountable…

Hi Everyone in the Sophos Community. I downloaded the ISO for the Sophos Firewall Home Edition-Free Version and used Rufus to burn it to a flash drive. I am trying to install it on my Dell Opiplex 9010 Desktop PC but when I boot to the flash drive it…

Hello, I am trying to install sophos for home use on my old Lenovo 720q on nvme and after installation is not booting Bios is in Legacy, nvme first to boot. My Hardware: CPU i3 Nvme 512gb 8 GB ram(i can boost to 32gb if needed additional…

I want to deregister suphos sg 330 from my account. I would like the device to be reset without a license. I would like to use them for home use.Resetting and reinstalling the firmware doesn't help.

I recently purchased a server to use with Sophos XG Home Edition. It's a Supermicro SuperServer 5019S-W4TR. Motherboard is an X11SSW-4TF. I also bought a Lenovo Intel P4511 1TB M.2 NVMe for use as the boot/system drive onto which I was going to install…

I recently rebuilt my proxmox server running Sophos XG : ASROCK J5040-itx Proxmox 7.4-13 - VM (3 of 4 CPU) : Sophos XG 19.5.2-MR2 Build 624 - Container : (1 CPU) Pihole DNS Over the last couple of weeks I've been getting lots of random XG crashes…

My friend decided to run FW Home on my recommendation, but he's having trouble and I took the machine home to troubleshoot. Five days later, I still haven't found the issue. SFVH (SFOS 19.5.2 MR-2-Build624) Lenovo ThinkCentre SFF PC Intel Core i3…

I am seeking professional guidance on choosing between two hardware options: virtual machines or dedicated servers. 1 - Dedicated system: Intel Celeron J4125 Processor - 2.00 GHz, 4 Cores, 4 Threads, 4 MB Cache 8G RAM DDR4 2400 MMHz 4 x Intel i210/i211…

Hi, Im new to Sophos XG Home SFOS 19.5.1 MR-1-Build278 , currently running it on protectli fw4b - speeds are ok - I get my full 500/100 bandwidth but UI is kinda slow. Tried running XG on intel nuc with I3-1115g4 /16gb ram virtualized on esxi8. To my…

Hi all, I have recently bought old Sophos and upgraded to SFOS 19.5.1 MR-1-Build278 for home use , is it possible to install Sophos XG Firewall Home Use Edition license (whcih I have managed to get from Sophos but its giving my different serial number…

There have been a lot of posts in the forum about hardware compatible with Sophos Home and related posts about getting Sophos Home to run on XGS hardware (which is currently not possible). I asked what the future of Sophos Home was here, What is the future…

At home, I've a Sophos XGS 116 on which I'd like to install the Sophos Home License. I already wiped the SSD completely, but unfortunately I'm not able to install the Software Image on it. Every time when I try to boot from the USB-Stick, following Error…