After a Reboot, we cannot query our XGS SFOS 20.0.1 with SNMP anymore due to errors with the snmpd service. Before the reboot it was fine. snmpd is running. saving the config again via Webadmin does not fix the issue, it restarts with the same errors…

Hi, We have configured the SDWAN profiles for the WAN links and we are observing the pocket loss and latency on the particular link, Is there any way to get the notifications on these profiles over mail or SNMP ?

specific mib to monitor with snmp-exporter the fans and the temperature of a sophos firewall XG

Hello. We have some way of collecting events related to IPS, AV-Detection, ATP, MDR and sending them externally to a zabbix-type application. I am using SNMP but this interface does not provide such resources.

i enabled SNMP v2 agent on Sophos XG230 and successfully tested it from a remote server: snmpwalk -v2c -c mycstring 172.16.0.1 1.3.6.1.6.3.10.2.1.1.0 iso.3.6.1.6.3.10.2.1.1.0 = Hex-STRING: xxx then i enabled SNMP v3 (authentication only, no encryption…

I have: XG230 (SFOS 19.5.3 MR-3-Build652) XG125 (SFOS 19.5.2 MR-2-Build624) I searched in: CONFIGURE - System services (all available tabs there) SYSTEM - Administration (all available tabs there) google searche returns NOTHING or USELESS…

Hello everyone we are currently testing the shipment of SNMP V3 traps. Unfortunately, we notice that new engine IDs are constantly being sent by Sophos. Sending the traps with V2C works fine. I've been testing all morning and looking at the trap receiver…

Hi! Here in my company we have 4 address with Sophos Firewalls and in each Office we do have multiple internet links. We need to remotely monitor the individual gateway status from each firewall. Even on the version 20, Sophos offer the option to…

Hello, it looks like the XGS3100 is sending faulty snmpV3 traps. In order to check that I would like to enable the debugging log for the snmp deamon, There is a manual for the UTM but doesn't seem to be the same for the XG. https://support.sophos…

Guys, has anyone had success using grafana/zabbix with Sophos in version 19.5? I found little information about sophos and zabbix, a lot of material was developed for version 18, which is no longer functional, Sophos support nobody can help. Can anyone…

Hi, We use SNMP to monitor interface utilisation on a XGS 107 [firmware 19.5.0]. The XGS recently lost power and the SNMP Interface ID number changed when the power was restored. My SNMP server had to rescan the XGS to learn the new SNMP Interface ID…

Running SFOS 19.5.0 GA-Build197 How to enable SNMP via WAN port? I have enabled: System > Administration > Device Access > SNMP on WAN and LAN There is no response to SNMP queries from the WAN. However, it works fine in LAN. What else needs to…

Is it possible to setup a Read-Only SNMP (v3) Account or is SNMP (v3) always Read-Only? Is it possible to restrict SNMP Access to specific hosts? AFAIK you can restrict SNMP Access only to specific Zone. Restricted Access to SNMP is not possible via…

I am attempting to add my XG firewall to Ubiquiti's "UISP" which used to be called UNMS. The UISP will add 3rd party routers and switches that has SNMP. It wants the public IP and SNMP Community string. Ive tried a few things such as the name as…

Hi all. I have been successfully remotely monitoring a Sophos XG Firewall via SNMP (using MRTG), mainly to monitor incoming and outgoing bandwidth on all 3 Ethernet ports. To clarify... there is an MRTG server out on the Internet, connecting to the Sophos…

Hi, I'm trying to monitor the status of my policy based ipsec s2s tunnels. I already found the Nod "sfosXGTunnelInfo", but that is only the intended configuration and not a live status. Has anybody managed to get that status from a Sophos XG? Is it…

Hi everyone, since we query all firewalls with the SNMP MIB, SNMPD memory usage keeps increasing. After a certain time the firewall crashes. Reproducible SFOS versions: 18.5.2, 18.5.3, 19.0 ATOP - localhost 2022/05/06 10:12:35 ----x--------- 10s…

Hi everyone, a snmpwalk through 1.3.6.1.4.1.2604.5.1.7.1 did not show the sfosDeviceAPName (1.3.6.1.4.1.2604.5.1.7.1.1.1). All other OIDs (1.3.6.1.4.1.2604.5.1.7.1.1.[2-6]) show correct values. SfosDeviceAPEntry ::= SEQUENCE { sfosDeviceAPName…

Hi, i need to monitor a firewall with zabbix by snmp, do you have configuration settings document or guide for this, templates, mibs are useful too, somebody has any idea? Regards.