Hello, for the connction to my fiberglass provider i need an sfp module with following connection feature: SFP, LC-Simplex, 1000BASE-BX-D, Singlemode. I cannot find one in the compatibility list. Which is compatible? https://www.fs.com/de/products…

I made already a post about the 10G nic i bulid into which is not working as it should. So i thought I'd use the 2 bulit in SFP ports. I connected a cable to the SFP+ from my switch and nothing. I thought maybe the could not communicate so I connected…

Hello I struggle a little bit atm. I had sophos home virtualized on something intel N with 4x2.5G running proxmox. The thing had no legacy BIOS (sadly) so this was my only option. Then I got a SG230 cheap and I installed a intel 10G nic (x520-DA2, 82599ES…

Hello. We are using XGS116w right now and wondering which models supporting 10Gbps WAN. I saw that 1U devices have SFP+ modules but inside the SFP+ supported list, there are no tested RJ45 modules that would work for 10Gbps. https://support.sophos…

Hello, I have two sites configured with HA XG2100 firewalls, At both sites 1GBe Port2 is the WAN connection this is a 100/100 circuit typically usage is around 30%, 1GBe Port 6 is an MPLS L2 1Gbp/s Circuit that connects both sites. All LAN traffic is…

We currently have the problem that our customer has an HA configured with two XGS2100 and after a restart / failover test one of the fiber ports remains down and thus the entire network is paralyzed. As soon as I restart the firewall, the Auxiliary Sophos…

Update to LAG not working unless you specify interface speed Using XGS4500 on 20.0.0 GA-Build22 with XSAZTCHF4 "Sophos FleXi Port Modul 4 port 10GbE SFP+" LACP bonding was not working on PortsA1-A4 unless specifying 10G Interface Speed manually, disabling…

can you please help me I'm having an issue regarding SFP connection of the Sophos firewall, brand model xgs 2300 i implement sub interface in the SFP port of the firewall all the rules and policy are correct i even test the internet connection it is working…

Hello! We are planing micro segmentation of our server farm and thus will need a bunch of vlans in the range of 200-300, but there seems to be a limit on how many vlans can be added to a physical interface according to this kb: https://support.sophos…

Hello, I have a Minisforum MS-01 which have two Intel 2.5GbE and two Intel x710 SFP+. I'm using Proxmox and I did a PCIe passthrough of one x710 interface (tick/untick pass all feature doesn't matter) to Sophos XG v20 Virtual Machine. By doing an…

I'm upgrading my firewall and trying to figure out a simple way to switch my regular LAN from port1 to portF1 after importing the backup. I want to upgrade from the regular 1-gig connection to a faster 10-gig SFP connection. The tricky part is that there…

hello i have a sfp i want to use on my sophos xg210 is there any way to use a non compatible sfp like apply commands on cli or something like this ?

I'm looking to utilize a 2Gbps symmetrical connection on an XGS116. Based on the specs, it should be able to handle 7.7Gbps, or 2.0Gbps with NGFW enabled. I've currently got the upstream CPE connected via a 10Gbps SFP+ module to a CS110-48P on its own…

hello i have a huawei gpon that i want to use with my xg210 - after checking the page of compatible sfp i am not sure it work can you guys help me please , it is an sfp

Hi, we have SOPHOS-XGS-3300 device and also we have 10g port,i need to connect one 10G internet lease Line is it support ????

Hi, Is there anyway to tell if a Flexi Module is installed besides looking at it physically ?

Hey there, we just bought an Flexiport Module with 4x SFP+ Ports to connect our XGS2100 with our Backbone Switch (Cisco Nexus 9000 C93180YC-FX). We use FS SFP-10GSR-85 Modules on the Sophos side, and FS SFP-10/25G-CSR-S Modules on the Cisco side…

Hello! I was wondering if Sophos would sell those modules ( interfaces) when someone buys a firewall. 1 - 25 Gbps SFP28 2 - 40 gps qsfp + Only asking because i Could not find it in sophos firewall datasheet. (modules) If someone could help- me.…

Hey Team, One of my end customer having issue in FW while upgraded SFOS 19.5.1 --> SFP ports/interfaces couldn't respond or stopped working and ethernet ports are working fine. XGS3100 (SFOS 19.5.1 MR-1-Build278) Expecting usual support from my…

Hi everyone, I hope this message finds you well. I am reaching out to inquire about the compatibility of the SOPHOS 3300XGS , SFP+ module with the Switch HP 5820X-24XG-SFP+. We are currently evaluating our network infrastructure and considering using…

Is this model able to do link aggregation on the 2 X SFP+ 10Gbe ports? Thank you

Hello there, are there any experiences with Bidi SFPs? Are there working known working ones? Thanks! Edit: I didn´t find anything related in the Sophos Firewall, Sophos UTM and Sophos Switch: Sophos and third-party transceivers/SFPs compatibility…

Hi, It is possible to connect XGS3300/4300 to core switch with RJ45 SFP+ ASF-10G-T transcievers to get 10Gb/s speed over cooper? Any other transciever option, on link listed below I can only find this option for XG, not for XGS models? Has anyone tried…

Hi, we are trying to connect a Mellanox SN2100 Switch via the included QSFP+ MC2210126-005 Passive copper cable to a XG230 Sophos Appliance. We know that this is not officially supported, are there any chances it will work nevertheless? Is there a…

Hi, is there an VDSL-Module supporting 250 MBit (from Sophos)? Should be VDSL2-profile 35b .. Thanks,