Hi all,
I have 2 WAN links, both are from different ISP.
One of them (GW-principal) it's working flawlessly, the sencond one (GW-secundario) was the backup link for the GW-principal.
We decide to change the link state from Backup to Active so we…
Hello
I just (partially) installed an XG105. Most things work correctly but I'm having trouble getting a policy routing rule to work.
This is the situation/problem
VLAN10 (10.10.0.0 / 255.255.0.0) VLAN40 (10.40.0.0 / 255.255.225.224) range determined…
Hi Guys,
maybe i am blind, but i've not found a solution for my NAT / Routing issue.
I need to route / nat outgoing WAN traffic from one of my Client Servers to use the WAN IP from my UTM9, but have not found a viable solution yet.
I have currently…
I'm trying to get internet traffic to arrive to my Plex media server which is attached to my XGF. I've Had it working without issue when connected to my outer firewall; but I'm struggling with getting it working via XGF.
My network is as below:
…
Hi All,
I've had a bit of mare configuring and installing this recently - hence the plethora of questions over the past couple of days. Anyway, I've got to a new stage at the moment.
My network is configured as such:
DMZ 10.0.0.16/28
^
(To…
Hello,
I lodged a case with Sophos over the phone [7462215] a few days and called through each day with the response of "the engineer assigned to the case is unavailable, and there is no one else who can take the job, we will call you back" followed…
Wondering if anyone has seen this before.
We have 3 offices, Main has a 210 and the Branches both have a 115 connected to MO with a S2S SSL VPN. In the MO the local lan is great, quick, no issues. But at the BO, their connection to the MO is very slow…
Hi Guys, We use a 3CX Phone system with a SIP Trunk.
We are experiencing issues where calls make it through to the system maybe 3/5 times successfully then other times the call wont even make it to the 3CX server (No entries in call log) or the call…
Hi community,
Maybe isn't the first time you hear about this topic, but I need to know if VRRP configuration is possible on the current XG firewall SF-OS version or if it will be available any time soon.
Otherwise, if this isn't possible, Is there…
Hello,
I have problems with VLAN and Sophos XG.
Internet and everything is working on Port 1 under LAN Zone.
I created a VLAN interface on Port 1 with VLAN ID 3516. but it shows N/A under status.
I'm running a domain controller and some other…
Hello,
I've been using the XG Firewall for a few days now and it's great so far.
There has been one issue I couldn't solve on my own, I hope you guys can help me with this:
I've got my network configuration like this:
Now all I want is to…
This is my first time setting up an OSPF routed network. This network consists of 2 head offices (for redundancy) and 3 branch offices. I have both HO's in area 0 and all BO's in area 1. I set up one side of the network in OSPF neighboring R1 to R2, R3…
Hello, i'm experiencing an issue with my XG105w.
I have multiple Vlans in my network created with the xg105w, and when i transfer a file from 1 server being in the Vlan 1 to another server being in another Vlan, the transfer speed is limited at 60MB…
Hello, I got a weird issue with my XG105w:
I have set up several VLans as follows:
Vlan1: 192.168.16.0/24
Vlan10: 192.168.10.0/24
Vlan20: 172.16.16.0/24
Vlan30: 10.16.16.0 / 24
Vlan40: 10.0.0.0/24
My local servers (domain controller active…
I have a question here. i used to be able to do reverse dns lookups from my router when it was the dns server for my clients but now i have installed a Sophos Firewall XG home edition and disabled the dhcp server on the router i cant do lookups anymore…
hello,
i'm having an issue routing traffic through 2 vpn links and i can't find a solution, here's the setup
lan A 10.10.20.x/24 ---vpn1--- lan B 10.10.10.x/24---vpn2--- lan C 192.168.3.x/24
vpn1 is a sophos xg 16.5 mr3
vpn2 is a utm 9.411
i…
Hello;
Do not look first for bad english.
There are 2 internet lines in our workplace. 1. line general internet outlets, 2. internet line online games output, At the same time, it is possible to keep the ping time to a minimum in online games by bringing…
Hi, i have 2 gateways, 1 for lan network, and its working fine, but im trying to create a new one (gatway wifi) for a wifi network, but it is in red without Internet, i dont know what im missing, so does anybody has any idea? thanks a lot.
Reaching out to kind, wonderful, HELPFUL community! (Buttering you guys up) :-)
IN all seriousness... I am hoping ANYONE can help me out answering a few (Possibly dumb) questions that I seem to not be able to get answers for. (been waiting over a week…
Hello,
I've to add a route to join a network behind a router connected to PortD of a Sophos XG.
If I add a static route, i'm able to join the remote network, but if i'm doing the same configuration with policy routing, I'm not able to join the…
Hi All,
I made a video on how to configure OSPF across an IPSEC Tunnel using the Sophos XG. Hope you find it useful. I'm also open to video suggestions if you have any :)
www.youtube.com/watch
I am using XG v16.05.1 virtualized on a VMWare ESXi server (running on a Dell PowerEdge R710) All has been working perfectly for 1 year plus, up until Tuesday of this week. (Coinciding with the Amazon S3 outage)
No changes (that I am aware of) have…
Dear All
in order to build a mDNS/Bonjour gateway, I have configured a RaspberryPi with 4 VLAN interfaces:
eth0.110 with 10.10.110.20 eth0.130 with 10.10.130.20 eth0.210 with 10.10.210.20 eth0.230 with 10.10.230.20
The VLANs are defined in XG while…
Hello! Hopefully I'm just missing something easy with this setup but here is what i'm trying to do:
I am using Sophos XG as my primary gateway for several vlans. Since I haven't been able to get XG to act as a VPN client (Would be a very nice feature…