I use a Sophos XG Firewall 210 I'm trying to get traffic to flow between my wireless Network and my LAN. This is my configuration.

Hi, Good day, i have choosen a device name for my sophos xg firewall (administration>Admin Settings>Host Name: sophos.cedes ) but i can't ping to it, it doesnt work also when i go to https://sophos.cedes:4444 for the admin panel or https://sophos.cedes…

Hi, I've playing around during the last few days with Sophos XG at home, but I can't seem to make it work the way I want and need. I have a Juniper SRX210 doing all the routing and layer3 filtering, and I want to integrate the XG transparently in…

Good afternoon, I have a problem to communicate two remote offices to each other through the head office through SSL VPN. From either of the two remote offices, the services available at the head office and from the central office to any of the two…

So this one has me stumped and its probably just a lack of knowledge issue. We have three XG firewalls across three geographical locations. We are using a 10. addressing scheme with each location being 10.1.*, 10.2.*, and 10.3.*. Cisco routers are used…

I have just setup my XG330 and I plan to use it as my core router so I have assigned .1 for each subnet. My switches do not have any IPs configured except for their management IP which is in VLAN 10. InterVLAN routing seems to be working fine - I can…

Hi, how can i create a static route using a fqdn host group or objects? like in UTM 9 version. use in "destination IP" FQDN hosts (outlook.office365.com) instead of Ip address.

Call me frustrated! Over the past two days, I've tried dozens of configurations, fixes, and workarounds to to no avail. PROBLEM: A remote Mac user successfully connects to our Remote SSL VPN but can't join the Windows domain or connect to any local…

Hallo zusammen Ich habe folgendes Netzwerk, bei welchem ich ein Problem habe. Und zwar müsste ich von einem Client in der Domäne (10er Netz) an einen Rechner aus dem 3er-Netz kommen. Zugang zum Internet funktioniert. Ich erreiche per Ping das…

Hi guys I got this question from a customer, and sadly I couldn't answer. Any news on this topic would be helpful :) Best regards Fridi Mellemgaard

Hi Friends, We use Sophos Xg with version 17.06. We have a problem in this software. When we downloaded Vpn config file for windows. The size of file is shown as 0KB. Because of this, We cant connect vpn. Verify failed error is shown in vpn logs.…

Ok, something that I've easily done many times on all of our UTMs. I have a new IPsec tunnel I built to a 3rd party. We are just accessing a single remote (198.0.0.2/32) host configured in the tunnel, but it needs to be accessed from 4 different hosts…

Hi all, I've hunted through the forum but I am unable to find precisely what I am experiencing. I think my issues is related to firewalling. I have a network with two gateways. One is a managed router controlling access to all of our remote sites…

Hi Sophos experts, Now I have two gateways one is for internet other is for IDC as below. Sophos XG (192.168.1.66) Router (192.168.1.52) PC (192.168.1.0/24) Now XG has static routing for IDC as below -IP/Netmask : 192.168.101.0/24 …

Goal: Allow persons on the guest network to stream iTunes to Airport Express units connected to the main LAN network. XG firewall with 3 networks: Port1 LAN 192.168.7.1/255.255.255.0 Kids Wifi 172.16.40.1 /255.255.255.0 Guest Wifi 172.16.50…

Hardware: XG-125 Firmware version: 17.06 ---------------------------- Configuration: - Gateway 1 - Active, weight 1, connected to a low latency terrestrial connection - Gateway 2 - Backup, inherit weight from primary, connected to a satellite…

Good day all, I have a XG135 at a client site and setup a SSL VPN (Site 2 Site) with our Firewall XG 115. I have successfully setup the SSL VPN and have created the Firewall Rules to see from the client site my Datacentre network. (Backup server…

Hi Team, I would like to ask something regarding on my setup, I will have this kind of setup ISP>SOPHOS FIREWALL> CISCO ROUTER> CISCO CORE SWITCH> DISTRO SWITCH> ACCESS SWITCH. The router and switches will not be a problem for me on routing them to…

Hello everybody, I need some help here. I recently migrated from pfSense to Sophos XG home and I really like it, but I have some trouble getting my routing configured. Basically I want to configure remote access to my media servers. What I did is…

Hi all - we are new to Sophos XG firewalls. We have a client that has a vodafone vDSL router that when put it in bridge mode, the Sophos XG won't connect to it for some reason. It seems we can only retain internet connectivity if the Vodafone device is…

Hi all, I recently tried to point our DNS servers to our XG230 but when I run an nslookup I'm receiving the error "dns request timed out. timeout was 2 seconds". Our setup is pretty simple. We have 2 x Windows 2012 DNS servers. Each server points…

Here is our current setup - We have 3 sites, remote site is 192.168.0.0, HQ is 192.168.1.0, and a site to site tunnel to a hosting site where we access one host (192.168.216.3). The tunnel is configured between HQ and the hosting company, that connection…

Hello, We have an IPSec site-to-site VPN which is Active and Connected but we're not getting any inbound traffic, we can't ping from the Remote to any Local IP's but it works the other way around. Tried a bunch of different combinations of Policy…

Sophos XG 210 is NOT the default gateway on my current LAN, nor should it be. Port 1 - 192.168.10.2/24 & 192.168.200.2/24 Port 2 - Public WAN IPs SSL VPN 10.10.200.20/24 I am able to successfully connect to the SSL VPN, using LDAP (AD) authentication…

Wir haben eine Firewall XG. Mit dem SSL VPN Client verbinden wir uns ins LAN. Das funktioniert soweit. Nun haben wir auf der Firewall einen weiteren Port auf dem das WLAN in einem anderen Subnetz liegt. Das WLAN hat keinen Zugriff auf das LAN. Um vom…