We have a new office with an XGS 2100 which is connected to our central UTM SG via RED. We have created a bridge on both sides for the office LAN and multiple WiFi networks. All traffic is routed via the central UTM. (UTM is default gateway) Our WiFi…

I work for a healthcare provider. We are going to provide services for the schools in our county. I need to set up a small network (2-6 devices) inside each of the schools that can communicate with the home office. The school is providing internet via…

Hi Can anyone assist with a link or Documentation on the Recommended Red Device Sizing guide for XGS 3100 & XGS 4300 thank you.

Hello, i have sucessfully configured the RED20 Device to my XGS-126. I can reach any device, that is connected to my XGS Network. Now i need to configure the acess back to the devices that are connected to my RED Network. I can ping the RED20 Device…

Hey, I,ve got the problem that I can not ping the RED device itself but all devices connected via this RED device. I have firewall rules in place to allow this ping cross these vlans. Is there any specific setting in Sophos XG, like "Device Access…

Hello Guys I have a Red 60 and I can ping it from Sophos XG135 but not form any laptop form the main office LAN. I have even set the route_precedence to 1. VPN 2. SD-WAN Policy routes but it does not work Could someone help me out with this…

Good afternoon all, Recently I deployed a Fortigate firewall at our edge and replaced the Sophos XG 210 we previously used. However, I have a remote site connected via a RED device and rather than mess around with another box and IPSec VPN tunnels,…

Hi, I got an brand new XGS2300 Cluster (active-passive)at on of our customers which six SD-RED 60 connected. When making changes to one of the RED tunnels (every tunnel has two VLANs in access mode, drop tagged associated) the update of the interface…

Hi, I have to add 14 RED60 devices for a customer I have now configured 2 devices, and have exact the same problem on both devices. After configuration it works fine, for about 2 minutes. After this time, I have a short down on LAN port (only…

Hi, How can i set a Static Ip mapping on RED (I am using SFOS 18.5.1 MR-1-Build326)? The RED is setup and working, on CONFIGURE | NETWORK | DHCP I can edit the DHCP server for this red, but there is no "Static IP MAC mapping" option (as exists when…

Hi, I've problem UTM310 with RED60. the REDs (transparent/split) and another site i have sophos cyberoam ICMP ping forward is enabled. Ping from Client behind RED to internal is good and i can access any client but i can't access from side. I check…

Hello all, looking for some help and guidance. I have one office with a sophos xg and 4 remote sites using SD RED 20 units. All 4 SD RED 20 units are connected back to the XG using standard/unified mode. No issues with getting this all connected.…

HI I would like to deploy RED at 16 remote sites, I would like to know if Sophos XG 135 ( which is our client existing firewall) supports RED-50. Thanks

Hello everyone, is it planned to install the Firmware Updates for RED and Access Points via Sophos Central? I have many firewalls where I have to logon and click on install. The possibility to install these updates with a time schedule would be nice…

We have 3 primary sites, they have XG125 and Custom hardware 4-core 6GB RAM boxes, all running 18.5.1. There are 7 branch sites, each has 3 RED tunnels, to the main 3 sites above. Ever since we upgraded to 18.5.1, it seems like when a Branch or…

Deutsch (english below) Hallo zusammen Wir haben in den aussenstandorten jeweils ein RED. Wenn ich den Drucker in einem RED-Standort oder vom Hauptstandort an einem RED-Standort über Windows verbinden möchte, erkennt er den Drucker nicht automatisch…

This topic was discussed here but I found a way to make it work. However, this solution causes something else very important to stop working. The following problem originally exist. Based on Sophos SFOS 18.5.1 MR-1-Build326 When creating a new hotspot…

Hi All. Has anyone come across this before. I had a RED15 device working fine on UTM. I moved it to XG and it works fine. Try move it back to UTM and it does not connect at all ? Any ideas, its still working on the XG so I dont understand why…

Hi, I'm trying to set up a reliable connection between two offices of the same company using RED tunnels instead of VPNs. There are limitations which are not relevant now, but the fact is that we can't use IPSEC VPNs and RED tunnels work fine. This…

Hi Team, Need to segment a remote branch network using VLAN. My current setup. HQ -> XG210 build 18.5. With already configure VLANS. It's also the DHCP server for the VLAN network. -> VLAN attached to remote RED interface/Hardware with the necessary…

Hallo zusammen Ich habe das Problem, dass ich in einem Netzwerk XGS mit entsprechenden Reds zwar einen Zugriff von der RED in die Zentrale bekomme, jedoch von der Zentrale nicht auf Geräte die an der RED angeschlossen sind. Überprüfen tue ich das ganz…

My heart just missed some beats. After increasing the size of the subnet of one RED Device and then, because there was an existing static lease in the middle of the new available Net-Range, I decided to add an other dynamic range after that static entry…

Hi, Looking at deploying a new site with a Sophos SD-RED60 and as there will be a few switches at this site would like to put some redundant switching options in using STP. I can't see any options in a RED interface for STP. Is it possible to configure…

Recently I purchased a RED20 to connect our branch office to HQ. The HQ has a Sophos XG firewall (XG310) which is all up to date. When I try to connect the RED20 from the brach office to HQ no connection is being made. What happens is this: when…

I am trying to setup DHCP relay for a RED Device. Is this possible because I can't get it to work. I am running SFOS 18.5.1 MR-1-Build326 172.16.10.13 is the IP address for my Windows Server DHCP. I ran packet capture on the device and it shows…