RED15/w are EOL, I know. We have some up running and they are fine. Today I powered up a RED15 and a RED15W both need to update firmware and will never come online again so I have the feeling, Sophos is actively blocking the something here? For…

We are a medium sized automotive dealership group with 11 locations all with a connection back to a centralized XGS2100. A few of the stores are on the same campus and are connected back to the XGS2100 via private buried fiber each having their own port…

Hello, We have migrated a Sophos RED 15 from an SG to an XGS and are now getting the following error with the RED REDD ERROR: server: Can not do SSL handshake on Socket accept from 'ipadress customer': SSL accept attempt failed error:14094418:SSL…

Hi all, configuration: SD-RED 60 with 2 uplinks: first - MPLS fixed IP second - DSL - DHCP within RED-Settings i have configured 2 connections to same FW Firewall-IP/Hostname - 192.168.40.1 (MPLS-IP of Firewall) 2. Firewall-IP/Hostname - 22.33.44.55…

I have a XGS2100 (SFOS 19.5.1 MR-1-Build278) in an HA pair. I setup a RED-20 device at a remote office about a month ago (this is our second RED device). Everything was working fine until I rebooted the XGS2100 at our main office today. When the firewall…

Reetings friends, I am new to Sophos and I am learning how to use this tool. I need your help, the case is the following: I have two locations connected to the central Sophos via VPN WITH Sophos RED-60. the first is configured in Standard/Unified…

Hello, our customer has an XGS 2100 HA installation with currently two REDs. So far it's going very well. Now our customer has taken over three additional locations and would now like to connect these to the internal network with the XGS RED environment…

Hey All, We seem to be having an issue, that when : Switch Settings : Switchport mode : Switch is enabled It only allows untagged packets. How do we set it up that it allows Vlans and untagged traffic ? According to this article : …

I have an issue where laptops can't see printers on the same RED WiFi until the laptop reboots. And sometimes this doesn't resolve the issue. When the printers are hardwired to the RED LAN, no issues at all.

Hi, In the past on the UTM, I could see if the LAN-Ports were connected of a SD-RED20. Now, I cannot find this function on our Sophos XGS (latest stable firmware). Does anybody know how to check this centrally? Regards William

Hi everyone, is it possible to extend the vlan from one site to another using red server tunnel on both sophos xgs firewalls? If yes, how it's possible?is the some guide to follow? Thank you Valerio

Dear Support, we set up a Fortigate firewall 200F at our edge and replaced the Sophos XG 210 we previously used. However, I have a remote site connected via RED devices, I decided to just continue using the RED device and move the Sophos XG behind the…

I have a question about sophos red 60 or other model, someone knows if sophos red work with data link or only with wan interface? or any paper with this information?

Hi, Is it possible to use RED 60 as an independent device without connecting it to the firewall? Thanks.

Sophos Firewall version 19.5.1 Main office has XGS 3300 Branch offices have XGS 136 devices Branch offices have primary cable internet on port 2, and 4G/LTE cellular backup internet with a Netgear cellular modem connected on port 3. Cable on…

Hello Everyone, I have SD Red - 20 Device in a branch and i want to set web filter for the branch from HQ FW XG, in Standard/split mode. is there is a way ?

hello everyone, i have HQ and Branch Connected with Red - 20 and firewall XG 19.5, i have two internet connection, i made a rule to make the branch to take internet from the HQ to set Web filter, but the internet was too slow in the Branch so every…

Hello I have googled but cant find answer. The setup is as follows - I have two sites, connected to each other by RED (Both sides are Sophos XG). Site A has fixed IP. (This is very weak dedicated server on a provider) Site B has dynamic IP.…

Hi team, I noticed a strange thing about our own XGS-HA cluster today. One device wasn't checked in in Central (status "Auxiliary device status: Couldn't get the registration details. The device is offline.") although the HA status page shows everything…

Hi there, We have recently migrated our UTM to an XGS firewall, and are in the process of migrating our Meraki networks to Sophos as well. I am working on our first RED device, and have most things operating but am having trouble with VLAN communication…

Hi all, is it possible to bridge a Wireless Network to a vlan interface from the firewall itself? The traffic should not leave the RED itself in their lan interfaces. Can this only be done with using separate zone and bridge this separate zone with…

Two RED 20s in different locations have been online and in use for App. 6 months and working fine. Last week one RED(sred) can no longer establish a tunnel to the XG86. Using the other functioning RED to log into the XG86. We can see sred occasionally…

I have a RED60 here that has been used with a special configuration, connecting to a private IP as uplink IP while it's own IP is provided by DHCP. Can I just plug it to a WAN router and reconfigure it with other settings on the firewall or do I…

Hello, I configured a SD-RED-20 with a wireless Module and wanted to test it. The Problem is that the wireless Module isn't showing up in the AP list. When i looked in the Logs i saw that the DHCP-Request is being blocked because of Local ACL. …

I wonder some of my client uses SD-RED 60 and 1 cx use SD-RED 50 (that I give them to POC). currently they use SD-RED 60 and have issue about DoS setting make traffic random disconnect . So they have a question "Why SD-RED50 don't have this issue but…