I have got the install completed and all is fine, running a VM under VMware workstation.
I have port 1 setup as LAN on my virtual network. And port 2 setup as WAN (bridged mode), gets dhcp from my internet router.
Everything works fine on the VM side…
Hi, total newb to firewalls/routers so apologise in advance.
I have setup the XG firewall home edition in a lab environment. The install went fine and I can access the admin portal.
All the VMs are on a 10.x.x.x address. The firewall has a 10. address…
I am setting up a new XG210 for the first time.
Current, all our network printers are configured with an external IP address and all the workstations print directly to the IP
For example PRT1 has an IP of 64.115.86.20 and PRT2 has an IP of 64.115…
Hi Guys
I have a Software appliance of XG firewall.
The task is setup multiple vlans.
So I now have added more NICS on the VMWARE ESXI box and reinstalled the box.
However I cannot add multiple ports onto XG firewall from the web console.
…
Hi
I have a new Sophos XG115 without any firewall rule besides the default one, with a basic license, default webfilters and no IPS activated. It is connected to a router and to a internal switch. Both interfaces have 1000 Mbps - Full Duplex Auto-negotiated…
Hi,
In my previous setup, I was able to follow the DNS Best Practice guide to help me setup a Pi-Hole as DNS server with Sophos UTM, but for some reason, I seem to be having a lot of difficulty getting this to work with Sophos XG. Is anyone using Pi…
I'm currently setting up an XG 85 Firewall.
I've left everything as the default in the initial setup. I created a firewall rule that made the LAN AND WAN open.
I connected the firewall to our rack. Plugged in the cables to the LAN and WAN. I waited…
I'm trying to get internet traffic to arrive to my Plex media server which is attached to my XGF. I've Had it working without issue when connected to my outer firewall; but I'm struggling with getting it working via XGF.
My network is as below:
…
Hi Guys,
Sorry for the Noob question. I am still pretty new to Sophos. Do you guys have a best practice on how to properly lock down a firewall esp the WAN to LAN and LAN to WAN Firewall Rule?
Appreciate all the help from this really responsive…
Hi All,
I've had a bit of mare configuring and installing this recently - hence the plethora of questions over the past couple of days. Anyway, I've got to a new stage at the moment.
My network is configured as such:
DMZ 10.0.0.16/28
^
(To…
So I had this working not so long ago but decided to restart it after I changed a few IP addresses and couldn't access it. So plugged monitor and keyboard into my box and selected the "factory reset" option.
So; my device has 4 network ports and I'm…
Hi,
since I am using XG, I'am getting always IPS alerts, and I am concerned about, because I don't know the reason of these alerts.
Are IPS alerts a alert about accessing websites with vulnerabilities or outdated software, or means an IPS alert…
Morning,
Just a quick question. Is it possible to configure two ports into a completely transparent bridge? Basically, I want traffic to flow into one port on my device and out of another without it ever "seeing" the XG software. Obviously, I want…
Hi,
I have a situation in our new XG 330. All VPN Users are having trouble accessing an internal web server via web browser. It gives the users the Error 502.
What I already did to isolate the issue:
- Removed the HTTP scan from the FW Rule…
Am a new babie in SOPHOR firewall. I have a new XG210. I want to achive multiple DMZ, WAN and LAN.
I have my core switch connected to the firewall which had two vlan one Management and the second one SERVER. I want to have two ISP connection which would…
Hi all,
I have a XG210 in gateway mode. Also I have a server with a site (100.100.100.4) in it and an internal DNS server (100.100.100.2) to publish the site.
I can see the site from the internet but not from the internal LAN.
I have a DNAT rule…
Wondering if anyone has seen this before.
We have 3 offices, Main has a 210 and the Branches both have a 115 connected to MO with a S2S SSL VPN. In the MO the local lan is great, quick, no issues. But at the BO, their connection to the MO is very slow…
Hi everybody,
I just instaled a sophos xg 115 firewall and i cannot Access to internet.
I connected firewall's port 2 (WAN) with ip 192.168.1.2/24 to my Movistar Router (ip 192.168.1.1/24), and then i created a LAN in port 4 with ip 192.168.75…
Hi All, I' m having a huge headache over this issue..
We've got XG Firewalls deployed at our customer sited, they are all working nicely, but we like to set up an IPSec tunnel to our local pfSense firewall to monitor the equipment.
I'm getting the…
Hi, Recently connected our Head office and branch with XG 115w and RED 15.
Getting internet and local network but cannot get ichat to and from head office to branch.
At head office, getting ichat within office and at branch office getting ichat within…
I can access all LAN resources from the VPN but I cannot ping anything from the LAN to the VPN. I have worked with support and they have verified all settings are correct within the XG.
XG135 (SFOS 16.05.1 MR-1)
Environment:
Server 2016 with AD…
Hello,
I've been using the XG Firewall for a few days now and it's great so far.
There has been one issue I couldn't solve on my own, I hope you guys can help me with this:
I've got my network configuration like this:
Now all I want is to…
We have an application that uses a specific port range for TCP/UDP. For example port 48129-48137. If there a way to add this service and specifiy a RANGE of allowed ports it can connect on. Rather than a single port.
Since I use a XG Firewall, my Downloads are starting with a delay of 10 up to 15 min.
After ~50% the download fails/interrupts.
I use a Sophos XG home with a 4 core Intel i5 and 6 GB of Ram.
I also tried Web caching and to reduce max. file scan…