• Sophos XGS 116 loses WAN connection after a few hours of normal operation

    David FM
    David FM
    In our production environment we have replaced our old firewall with a Sophos XGS 116. We have replicated the rules we had in our old firewall and everything seems to be going well: our applications are accessible, we can manage our databases... in short…
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • Routing 2nd Public IP to another router

    Felix Burkhard
    Felix Burkhard
    Hi We have a fibre link from our ISP with a static IP and a secondary / extra range of public IPs. Public IP: 100.100.100.62 (numbers made up) with GW 100.100.100.61 - This is the primary IP we use. We also have a set of secondary public IPs on…
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • Secondary link not working when primary link down

    oriens global
    oriens global
    Dear Mate, I've two links one is a static IP address another is a PPPoE connection, both links are ACTIVE connections, whenever a static IP link is down, the PPPoE connection is not working properly, it's very slow but that pppoe link is 400mbps line…
    • Answered
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • XGS 2100 multiple PPPoE connections through same WAN cable.

    Kamil Jakkobczak
    Kamil Jakkobczak
    Hello. I have 5 different PPPOE accounts from my ISP .. ISP gave me one fiber modem with Ethernet cable out of it ... I was able to start one PPPoE session without any trouble, but I don't know how to start several sessions on one port. Adding an…
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • How to configure and connect sophos xg with modem( router mode)

    Fotit
    Fotit
    Hi all, I need to know how to configure my sophos xg with modem , but this modem is in router mode not on bridge, because ISP didn't allow me to make the modem in bridge mode. I have fixed ip public and i never did this configuration ( FW XG <---…
    • Answered
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • User Interface Designer

    Fermin
    Fermin
    Hi, Please, we are on version 19.5 This doesn't make sense... 1,10,12,2,3....
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • Changing public IPs

    JohnDean
    JohnDean
    I've got a Sophos XGS116 at a colocation site where we host a bunch of servers for our clients. Currently on SFOS 18.5.2 MR-2-Build380 although I can update it before this changeover if needed for functionality for my request below. Otherwise, I was going…
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • No access to Internet in Bridge Mode

    Roland Barreto
    Roland Barreto
    I have implemented my sophos firewall in bridge mode. I have access to the internal devices, but I cannot access the Internet, what needs to be done to access the Internet? I was trying with a firewall rule but it didn't work.
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • Sophos XG and Echolife HG8245H5 /GPON Terminal

    Fotit
    Fotit
    Hi all, We will replace our ADSL connection by fiber connection So we have Echolife Echolife HG8245H5 /GPON Terminal I need to know how to configure XG Wan port with this " FTTH Modem", i don't know if this terminal is layer 2 or layer 3, or if…
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • Network Adapter is not recognized.

    Roland Barreto
    Roland Barreto
    I have installed Sophos XG but when configuring the WAN port, the Firewall does not recognize the network adapter. This a USB to RJ45. Do you know if there a list of network adapters that are compatible with Sophos XG?
    • Answered
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • SFP DSL-Module supporting 250 MBit ??

    dirkkotte
    dirkkotte
    Hi, is there an VDSL-Module supporting 250 MBit (from Sophos)? Should be VDSL2-profile 35b .. Thanks,
    • Answered
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • xfrm interface not showing in GUI when tunnel is created

    Jimmy10
    Jimmy10
    Hi, When I create a Tunnel interface, I am unable to find the xfrm interface in Network >> Interfaces. I can see the xfrm interface in the CLI though. How do I get to see it in the GUI as I need to use it in a Static Route?
    • Answered
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • Zone/Network/Devices Relationship

    DS7109
    DS7109
    Hi, I've moved to SFOS 19.5 from UTM9 and having some trouble getting my head around a couple of the concepts. One of them is the Zone/Network/Devices model that SFOS uses; What's the relationship between Zones, and Networks and Devices when creating…
    • Answered
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • IPv6 renumbering -how

    rfcat_vk
    rfcat_vk
    Hi folks, my new RSP has assigned me a new /48 for internal use, how do I renumber all my XG IPv6 addresses? Ian
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • XG home lic adding a 2nd Wan Line

    TingYu
    TingYu
    Hi, I have a XG home lic appliance setup in a virtual machine, and right now I have one nic for one Wan line. I want to add a new NIC so I can have a 2nd Wan line. I have two ISP lines coming in, one from AT&T, other one from Verizon. I found out…
    • Answered
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • Firewall can't switch on backup connection

    Kacper Zontek
    Kacper Zontek
    Hello, I have a problem with the backup link in Sophos. We received an LTE link that works and has the correct address set. The "Type" options were set to "Backup" and the "Activate on failure of" rule was set to the main link. The problem is that when…
    • Answered
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • Sophos XG firewall adding alias

    Ihenock
    Ihenock
    Hi All I have sophos xg 750 firewall and currently I want to ad one public IP as an alias on the existing Physical port. So on doing that will interrupt the production environment ?
    • Answered
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • (XG) VLAN traffic showing up on unexpected interfaces

    MBue
    MBue
    Hi all, User Kyle Sexson had this issue a while ago, too, but there’s no solution in his post - so… I have a set of VLANs running on a bridge interface. This works mostly well, but certain outgoing traffic will show up both on the bridge interface…
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • VM XG 19.5 pppoe ipv6

    Paolo Skizzo3000
    Paolo Skizzo3000
    Hi, my provider ISP provide me a PPPoE Dual Stack WAN connection. Using a Linux PC is possible to get IPv4 and IPv6 IPs with the same PPPoE connection and works perfectly. In VM XG FW v19.5 Port 1 configuration is WAN with IPv4 PPPoE and works…
    • Answered
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • Creating second physical LAN but no internet access is available

    Daniel Cook2
    Daniel Cook2
    Hi there , relatively new to Sophos firewall however I currently have it setup at home feeding direct 100 mbit connection from the wall to my firewall with a switch that’s fully occupied under 17.16.16.1/24 ip range for a few devices and my wireless…
    • Answered
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • Utilizing Ethernet Ports on XG

    SophosNewby
    SophosNewby
    Good morning, I come to you today asking for some advice. I am really under the gun with revamping our entire flat network into a more optimized system. Being the single IT person responsible for multiple plants I am quite overwhelmed with what direction…
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • SFP Module diagnose

    ThomasWeiss
    ThomasWeiss
    Hi everyone is there any way to diagose an optic SFP module on SFOS? I think about the infos you can get on a switch: - check if the SFP is recognized - get the Infos from the module (S/N, Type: SX,LX, LH...) - read the optic information like RX…
    • Answered
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • PPPOE connection without credentials

    hoep
    hoep
    I got a new fibre internet at home. PPPOE is done with a Fritzbox to a Fibre Modem via PPPOE without any credentials needed. As to avoid double NAT i want my XG to do the PPPOE connection directly, but i have no way to leave user and pws empty. If i enter…
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • Is there a method on Sophos XG firewall to have two active WAN interfaces on the same network segment?

    Krisna Gokoel
    Krisna Gokoel
    I have two connections from the same ISP that I would like to connect to my XG firewall and have both actively function. However as soon as both interfaces are connected, one goes down and inactive. Is there any way to have two WAN connections to the…
    • Answered
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • PPTP Gateway on XG S2100

    Andrea Manzini
    Andrea Manzini
    Good morning everyone, I'm having a problem doing a PPTP VPN between an XG S2100 and a Teltonika RUT950. I also submitted the question to Teltonika support who answered me after seeing the logs. They claim that the problem is that Sophos releases its…
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • View related content throughout Sophos Firewall
  • More
  • Cancel
<>