Hello, My main network is 172.16.x.x and I have a VPN network using 192.168.x.x. The two networks don't 'talk' to one another but I would like to change that through the use of a VLAN. First off, is that even possible to where I can access either…

We are setting up a new VLAN for handheld scanners, We require for staging and Sophos Mobile Management that the handheld scanners also have a connection to a FQDN Group of Google and Sophos websites. When I set this up I see the scanner trying to connect…

Hi, I have an XGS firewall with 10gbe module and two L2 switches with spf+, one of which is poe. What would be the best way to maximize performance and pass all vlans on all switches because they still don't support stacking? Should I create a LAG…

In my early days we put the default + vlans on all port 1 (1 gigabit), since we having some issue with smb traffic and sometimes freezes/spikes, i wanted to try to change that. So i thought i could use port 4-8 and trunk them together and allow those…

On XGS series firewall, how to assign multiple VLANs on each port (port 1-8), such that each port has a native VLAN, and some allowed VLANs. e.g.: port 1, native VLAN 1, allowed VLAN 2,3,4 port 2, native VLAN 2, allowed VLAN 4,5,6 port 3, native…

Hi , Can I define both vlan and per-user bandwidth in Sophos Firewall? For example , when setting a limit to traffic shaping vlan on Fortigate ; per-ip shaping could also be done.

Hi everyone, I was wondering if anyone can help. I have the follow: An XGS2100 I need to connect 4 separate switches into it. I need the 2100 to: 1. Act as a gateway for 5 different VLANS across the 4 ports irrespective of when the gateway…

Currently I have a Cisco SG300 connected to my Sophos XG125 Firewall and everything is working well. SG300 is running as a L3 switch and its connecting to the firewall using a trunk port. I have VLANS as well and intervlan routing is working well. The…

Hi! Unable to obtain IP address from DHCP created for VLAN interface. The L2 switch is a NETGEAR GS308T and is trunked to the Sophos XG Firewall. I have an access point connected to the GS308T and cannot get an IP address via DHCP on my iPhone or…

Hello, This is my L2 schéma and L3. I have 2 xg 115 firewall, a sophos switch. I also have a windows server 2022 how have a DHCP server. I want my pc's to get an internet access and to get their ip form my windows server 2022. I first tried…

I am using Sophos Firewall Home on a Protectli Vault FW4B. 5 VLANS are defined in Sophos and I am using CISCO SG-200 switch. I have dedicated one VLAN specifically for an IP camera in my home. Everything is working great but I want to configure that…

Hello all! I have a Sophos XGS firewall configured with one LAN and two WAN interfaces. The two WAN links are configured in failover mode, the backup link being activated when the primary one goes down. The backup link has limited bandwidth. I need…

I would like to see an easy way to move vlans to another port. This will help in moving a heavily used port from one port to another without having to delete the vlan and DHCP scope and recreate it. This would speed up moving vlans across ports. …

I am newbie currently testing a Sophos XGS 136 Firewall, The basic setup is working. We have a Cisco 3850 Core Switch with 4 VLANS and only the VLAN that the firewall is connected to is working. Traffic from other VLANS is not working and can not ping…

Hi all, is it possible to bridge a Wireless Network to a vlan interface from the firewall itself? The traffic should not leave the RED itself in their lan interfaces. Can this only be done with using separate zone and bridge this separate zone with…

Has someone managed to get Sonos devices to work when they are on a different VLAN than the Sonos App? Would be great to share some information. Especially about routing Multicast through the firewall. I found a great article about this matter in…

Hope someone can help figure out what I am missing. I am pretty sure the issue is on the Sophos XG. I am setting up several VLANS on my Cisco 9500 L3 switch and the issue I am having is I cannot get passed the gateway when trying to access another VLAN…

We were doing DHCP via Windows Server but decided to use Sophos XGS. DHCP to assign VLAN to Polycom phones via OPTION 128 String VLAN-A=20; - NOTE the ; (semicolon) MUST be at the end of the string for it to work with Polycom. XGS will not allow me…

I have 3 VLANS, 1 for CCTV, 1 for wifi controller, and the other for IP phones. data network - port 1 192.168.0.0/24 port1.12 - 192.168.2.0/24 - wifi. (VLAN) port1.13 - 192.168.1.0/24 - CCTV (VLAN) We want to manage the CCTV and the access…

Hello I am trying my head around strange VLAN issues when XG is virtualized. The setup is as follows - ESXi has VLANS created. XG has two ports - Lan and Wan. Lan is on 4095, Wan is on different switch. XG Lan has multiple VLANS created (reflecting…

hello , I am encountering the following problem: to simplify I have vlan A and vlan B Both have active dhcp server in sophos. Both work normally. However, if I set an ip/mac for a device in vlan A, sophos, vlan B does not deliver any more IP for this…

Hi all, i installed Sophos on hyper-v (vm) with 3 NIC: - NIC-A “LAN” (physical nic on server) - NIC-B “WAN” (physical nic on server) - NIC-C “LAN” (private virtual switch hyper-v) I’ve created Bridge with NIC-A and NIC-C, with "enable routing…

Good day Members, I trust you are well. We are trying to setup a guest Wi-Fi with Sophos and Unifi. We have it currently working but with the DHCP server on the DC, We would like to move the Guest Wi-Fi DHCP to the Sophos XG. Main issue is device are…

XG210, SFOS 19.5.2 MR-2-Build624 So, I have two VLANs, VLAN 70 - 192.168.70.0/28 and VLAN 100 - 10.0.0.0/24. DHCP server is on VLAN100, I want to relay DHCP requests from VLAN70 to VLAN100 for service. I have a relay set up like so: Name …

I have a small problem, I have a mikrotik router set up wlan10 (10.10.10.1/24) on port 2 everything works, I connect directly to the router, I have access to the network via vlan10, and when I connect sophos home (in bridge mode), I have an address assigned…