I have two connections from the same ISP that I would like to connect to my XG firewall and have both actively function. However as soon as both interfaces are connected, one goes down and inactive. Is there any way to have two WAN connections to the…

Good morning everyone, I'm having a problem doing a PPTP VPN between an XG S2100 and a Teltonika RUT950. I also submitted the question to Teltonika support who answered me after seeing the logs. They claim that the problem is that Sophos releases its…

Hi We install SOPHOS XGS 4300 device. We having one ISP providers with Static IP address 103.20.30.41 to 103.20.30.45 Port 2 I configure Wan Port and Static is 103.20.30.41 Port 3 I Configure Lan Port 192.168.1.1/24 and DHCP enable. In this port…

Hey Team, I have tried to work this out from the forums but I'm simply not getting it! The XG has multiple WAN interfaces: - Primary with STATIC network assignment - Failover 1 with DHCP network assignment - Failover 2 with PPPOE credentials Network…

Hello, i have a problem on a customers site. The customer switched from Sophos UTM to XG firewall. In the past the customer ran into the problem that his network got to small. Because of ease they just add 2 additinal adresses on the LAN interface…

Hi, On October 31, 2022 Windstream pushed a software update to our VeloCloud device that caused our Internet to go down every 20 minutes. The problem was isolate to ARP packets that are sent from our Sophos XG firewall to the VeloCloud device. At firewall…

Hi, I've set up a new VLAN (20) bound to the LAN hardware (Port1.20) with IP 192.168.20.1, and assigned it to the DMZ zone. If I run the policy checker using Firewall,SSL/TLS and web method, with the following parameters, it fails URL: dns://192.168…

Hi team! My WAN interface was stoped working, just give me information of not available. Other interfaces woring well

Why is not possible to create GRE tunnel on bridge-interface (WAN port + DMZ port ) ?

Hello, I'm having a problem with my "Interfaces" widget, I have three Wan interfaces and yet they are all "UP" but the widget remains orange. My wan on interfaces for gateway: 192.168.4.1, 192.168.100.1 and 192.168.4.1 and they all respond to the ping…

Does the XGS5500 support operation at 2.5Gbps of a 2.5GBaseT SFP? I have a client who has an SFP-2.5G-T from sf.com installed in their XGS5500 which is then connected over copper patch lead to a router with in-built 2.5GBaseT ports. At present the link…

Hi, I have assigned 5 IPs to WAN interface of Sophos XGS 2100 From LAN, i can ping all these piblic IPs. From public network, only 2 out of 5 of these IPs are pingable. very weird. Any idea?

Hi Team, I am trying to create an interface in the XGS firewall via CLI : #ifconfig Port1 172.16.1.1 netmask 255.255.255.0 up but here it making only interface UP without ip, I want to know how can give Zone here, so that interface can be up with the…

Looking at getting a VDSL SFP for the XG 230 Rev2 that has XG Home installed on it (not in use atm). Do we know what the p/n is etc and whether it'll work?

Hi all, setup is router -> Firewall -> Ubiquity dream machine. XGS2100 is configured in gateway mode (need to use SSL VPN), wan cable to port2, lan cable to (F1), lan cable is connected to an Ubiquity Dream Machine PRO. In the F1port there…

Hi Sorry for the questions this evening. I have a XG 230 Rev 2 unit spare atm, tbh I'm not currently using it due to power consumption and noise. If I get my house cat6 wired as I hope to do, then it will be maybe pressed into service along with Aruba…

XG 135 have 8 ports. I use 1 for LAN (port1), WAN1 (port2) and WAN2 (port3) . I have excess 5 ports. LAN has Vlans IDs 20 and 30. Default DHCP is on LAN port. I want to use excess ports as LAN ports, that also get their IP from Default DHCP. How do I…

I have never been able to change my Network, Interfaces, Connection, PortA=LAN or PortB=WAN, Interface speed. The Interface speed is set to Auto negotiate and "Grayed out". I am running on a VMware® Workstation 16 Pro, with NICs set to bridged mode…

Hi, I am trying to deploy the following scheme. A sophos xg at site 1 (WAN IP a.b.c.10) and another sophos xg at site 2 (WAN IP a.b.c.11). Both share wan network (a.b.c.x) and have the same defaulf gateway (a.b.c.1). The problem I am having in this…

Hi there, I've been hesitant with moving from SG to XGS. I did dip my toe into the XG pool by setting up one location with an XG Firewall, however the experience was poor. So I'm currently planning a hardware refresh with SG for the next 3 years as…

Hello i want to replace my isp router with Sophos gx but my isp works with 2 vlans on for internet and the other for voip and iptv is it possible to have both vlan in the wan port of the Sophos

Hallo, ich habe auf einer Sophos SG230 die XG v18.5.4 installiert. Ich habe 3 WAN Ports. 2 davon gehen auf den gleichen Router. Ich habe nun an einer der 2 Schnittstelle das Problem, dass nach ca 4 Stunden im WAN Link Manager das Interface als…

hello, I have one ISP I am using which is a dedicated 30/30mbps but the speed connection is really poor so I just want to use another ISP which will give me a 10/10 dedicated internet connection. So what I want to ask is that can I merge both the ISP…

Hi, I've recently installed a 10Gb SFP+ transceiver into Port F1 of a Sophos XGS 136 appliance. I can't tell if the transceiver has been detected by the appliance as I'm getting no link light by connecting to another device. Is there a way to examine…

Hello all - I am currently using XG3300 Firewalls ( SFOS 18.5.3 MR-3-Build408) in an HA pair as my main gateway/edge devices to the internet in my company. I have 2 users that mostly work in a web based application and I am having a weird problem with…