Hi everyone, I can confirm that (to me :-) there seems to be a bug if you have more than one WAN interface with PPPoE: The " Schedule time for reconnect" under "Network" -> "Interface" -> WAN-Port will not be respected though it will show correctly…

Hello, Is it possible to get 10gbit connectivity on xgs 116? Are there any expansion modules for this firewall? Thanks

Could do with a little help in recovering both my physical port 5 and virtual interface from a bridge that’s no longer responding to any configuration options. Initially the intension was to bring together DLAN devices over the physical port and those…

I'm upgrading my firewall and trying to figure out a simple way to switch my regular LAN from port1 to portF1 after importing the backup. I want to upgrade from the regular 1-gig connection to a faster 10-gig SFP connection. The tricky part is that there…

Today we want to replace our old UTM with an XGS 3100 cluster. In advance, we had created rules manually. But we were only able to test it today. We have a LAN port 1 (192.168.2.0/24) and a 2nd LAN on port 7 (192.168.201.0/24) When I access 192.168…

I am facing a very unique scenario where I simply want to disable the one ISP which in going in through Physical port in Firewall when that particular ISP goes down, don't want it as backup or primary, just want that port to turn itself off when ISP goes…

Hi. I am having what seems a very basic issue getting my WAN connection connected to Sophos Home Firewall version 20, I'm hoping someone can help? I've found various posts regarding this over the years but am still unclear exactly why it's still an…

Hello all. I'm a newb home user coming from OpnSense. I'm having an issue accessing my subdomains. This is something simple that I'm just not understanding. A couple pics will help explain what I'm trying to accomplish, and my setup. Interfaces …

I have the static IP from the provider. They said there was no gateway, subnet or dns, just APN. I'm looking to connect this similar to a WAN interface for a circuit. I know we have to setup the router as a bridge/pass through. I need the firewall…

hi, if I scan the WAN IP from my Sophos Firewall, i can see open Ports, like: PORT STATE SERVICE 21/tcp open ftp 22/tcp filtered ssh 23/tcp filtered telnet 25/tcp filtered smtp 53/tcp filtered domain 80/tcp open http 110/tcp filtered pop3 111/tcp…

Hi, we are using SOPHOS-XGS-3300 now we have 2 internet lease line connection we are planning to add one more lease line any issue we will faced if we add more than 2 . TATA-500MBPS ACT-300MBPS after upgrade ILL TATA-1GBPS ACT-300MBPS JIO…

Hi there. I'm trying to deploy this XG330 into my home network with 10G expansion card for WAN and LAN (3gbps fiber internet). If I test through the modem I get 3.2Gbps in and out. If I put traffic through the XG330 I get initially 700mbps then…

Hello, My GPON ONT converter device is one without the DHCP mode (static IP 192.168.50.x). Once I have connected my Sophos XG firewall device with it for a successful PPPoE dial-up, I can no longer access it by assigning a static IP of 192.168.50.y…

Hi, I have XG230 it shows that the wan port is down (Status is Red) however the connection is up. Appreciate any comments

Hello Yesterday, I created a new DMZ zone to add DVR's system to it After that, I created a role to access this zone through the LAN. However, I discovered that the role consumes a very high amount of traffic, and because of this traffic, I cannot distinguish…

I am using sophos xg430 firewall. I have noticed a strange behaviour that when a new interface is added, the adjacent interfaces becomes unresponsive. Either we have to wait for almost 10 hours to have the interface to respond/we need to reboot the firewall…

Hi everyone, I set my Firewall Wan Port to 1000 mbps Full-Duplex with Auto-negotiated enabled. I thought the solution was to set the WAN bandwidth to 1000 Half-Duplex but there is no option (only 10 HD, 10FD, 100 HD, 100 FD and 1000 FD) My Modem (Vodafone…

Hello everyone, I need assistance in configuring the internet connection with a real IP entering through WAN on port 1 and going out as a real IP on port 2, while distributing it as a local IP. Please help me with this.

hello. Sorry for my poor English. I was thinking of connecting LAN cables to multiple ports of the XGS136 to create one LAN like a regular router. ex) port1=WAN port2~port10=192.168.10.1~192.168.10.255 Assign default gateway 192.168.10.1 to…

Installed home firewall on XG 125w rev3. The software shows ports 5 and 6 as Port 1 (LAN) and Port 2 (WAN). It seems all of the ports are numbered wrong. Is there any way to configure the software to see the correct port numbers?

Hi, In doc.sophos.com/.../index.html i found that a bridge interface can configure from 2 to 64 interfaces, but i don't find how many bridges can i configure. Does anyone know the limit?

Hi, we have two core switch with single sophos-xgs firewall.only internet traffic coming to firewall all Lan gateway are configure in core-switch.both core are connected with VLT. query ----how to connect two uplink with firewall and what need to…

I have a simcard in WWAN unit but ATT does not seem to know any info on setting it up. Does anyone know what all I need to put in? Thanks.

Hi. Does anyone know if it's possible to exclude configured network interfaces from the coloured interface status icon on the home page of the firewall? Its purpose is to show at a glance of connectivity problems. However, sometimes it is normal for an…

Wan Port Automatic down of sophos xgs 2100 firewall. what is solution.