Hi, i read this post RE: Activate and deactivate IPsec connection via CLI It's what i need, but into Api documentation i can't see anything about this command, could you send me a documentation on info about this command? Thanks

HI, I would need to retrieve the following information from the XG 135 Firewall via script: - VPN status node by node and child by child - restart the VPN if phase2 or phase1 is down Can you help me retrieve this information via commands? Thank you

Hello all, We have deactivated LLMNR via GPO. After that we had the problem that users who work via VPN have more DNS problems. No problems could be found in the internal network. In 90% of the cases, internal resources can no longer be resolved.…

Good day, Wonder if anyone can help me. Have a site-to-site tunnel with a remote server. The remote server is connected through a site-to-site tunnel to a different company so I don't have control on the remote side network. Now I am trying to get…

Hello, help troubleshoot this IPSEC connection. I have two IPSEC connections on My Sophos ( XG210 ) to AWS first is on My Primary IP which has connected successfully even though it's slow. The Second one is on my Secondary IP which is our back…

Hello, I have set up a site-to-site tunnel from our device XG210 to AWS, despite having less than 100ms on ping the connection is very slow, kindly advise what the issue could be the issue, since the setup is okay, and tunnels are connected.

"Good morning, everyone. My question is the following: I have a modem that performs NAT from the public IP and provides the firewall with a private IP 192.168.1.0/24. Is it possible to establish an IPSEC connection with another firewall using a private…

Hello! We are using a Hardware Firewall XGS-2100 to connect to two datacenters running our AD Controller there. The AD is also our DNS Server. This worked fine for a long time. For some reason one of the VPN stopped working and one of the AD Controller…

I have a VPN IPsec tunnel between my two firewall sophos. I have a connection but no trafic. I made some firewall rules but I have nothing. This is my schema. And there are my rules: Could someone help me ? Thanks

I have a Sophos model SFV1C4 with SFOS 19.5.2 MR-2-Build624 After the last firmware my site-to-site connections is timing out. It is Sonicwall that initiate the connections. I am using IKEv2 and after a while I get an error: ID 983 VPN IKEv2 Received…

Dead Peer Detection has a hidden design flaw. Dead Peer Detection is a feature designed to retry\re-establish a tunnel when a tunnel drops. You can set 3 settings in this feature for 1)how long to wait before a retry, 2)how long to wait for a response…

Good day Folks, I'm trying to get the following scenario to work for "STAS over IPSEC with authentication at Head office instead of branch": 1. User signs in at branch office 2. HEAD office firewall picks up or gets the authentication forwarded…

I am running Sophos XGS 19.5.2 MR-2-Build624 in an active / passive cluster. I have configured IPSec VPN for 150+ remote users. I have approximately 32 split tunnel networks (recently migrated from another vendors platform). I've noticed that once connected…

Dear Support; I am using sophos xg firewall hardware device. I do IPSec configuration with AWS according to their configuration file. And follow Sophos Firewall: AWS VPN Gateway IPSEC Connection I received the notice "IPsec connection could not be…

Hi, i upgraded our XGS2100 from 19.5.2 to 19.5.3 We had a solid VPN Connection to a customer, after upgrading the Connection fails from time to time and VPN Log shows. 2023-08-28 10:11:14 IPSec Deny Received IKE message with invalid SPI (19CBD566…

Why can't you view your site-to-site settings when you have a failover group active. Whenever I'm working with a SOPHOS engineer on an issue, the first thing they want to do is view the VPN settings, but they can't without taking the VPN tunnel offline…

Hello Everyone, I am enabling IPsec remote access VPN on my firewall XG, the problem is that every time when the clients establish the VPN connection, my clients are getting an Apipa IP address as a gateway and the traffic toward those two IP (172.1…

Hello community. I'm pretty green with setting up VPN's so I have been studying like mad over the last few days every Sophos article and video I could find to try and do this myself but I have hit a brick wall. I need to connect a remote workstation to…

Hey All, , So i had something interesting that got fixed today. On the old XG V17-19 when you create a IPSEC VPN, you didnt need to add a no NAT rule (I could be mistaken if some one can confirm this) But on the XGS, I had setup all the VPNs…

im having the problem with ipsec to a client with cisco firewall. The firewall cannot connect to the remote site but the policies and the satting are the same. This is how my setup is Local Public ip : 154.120.225.2 Local ID : set as the Public ip…

Dear Community, my name is david lorenz and I have a problem at one of our customers. At first I will describe my network situation. They have a HQ and a BO. The HQ has the network: 192.168.2.0/24 (Sophos XG210 with 192.168.2.1) The BO has the…

I have configured an IPSec VPN site-to-site connection between two sites, and after that, the ping traffic was going through between the sites. However, about 10 minutes later, when I pinged again to check, there were always a few initial packets that…

I currently have multiple tunnels on a SFV4C6MSP running on a cloud VM. I use this router to connect multiple IPsec tunnels to different customers. These tunnels are setup as tunnel interfaces. and they will work fine for weeks, or months before one…

Hello, Every 24 hours after the pppoe connection is reconnected, traffic stops passing through the tunnel. My side is configured as a branch, has a dynamic ip address and initiates an ipsec connection. After the wan ip address is changed, the tunnel…

Hello, I have IPSec site to site tunnel and I need to troubleshoot why at some point tunnel goes down and or traffic stops flowing. What means this part of log. At the moment tunnel is up and traffic is flowing. Other side has Fortinet firewall, my…