I've seen similar topics here, but none seem to quite work. XG Home VM, v20, with a pretty minimal ruleset. I'm really the only person on my home network. At some random times the VM will go to 90-100% CPU usage and stay there. This has happened at 2…
Hi all,
I have a XGS 116 with an ADATA IM2S313-064GDA 64GB SSD which is, according to the tech specs, an M.2 SATA III interface card. As the TBW are only at 17TB right now (2 years use) but the "Percentage Used Performance Indicator" says 178, we may…
I’m looking for some advice for Hardware for the Sophos Firewall Home Edition.
I’m not sure if I should use a vm or bare-metal installation.
When I was looking for some hardware, I found HPE ProLiant MicroServer Gen10 Plus v2 with an Intel Pentium…
Hello people,
sorry for my bad english - try my best.
Situaltion: Had a SG330 Rev 1 installed with a XG Home here in my private home and environment with a HA Active-Passive Configuration. Totally oversized, i know - but that´s not the point.…
Hello guys,
We've recently transitioned to XGS4300 after employing XG430 for some time. A few weeks back, I migrated to the new XGS4300 and uploaded the configuration exported from the XG430, making only minor changes, mostly related to port number…
NIC not seen in console. Is there a way to get drivers for this? It shows up in BIOS of the server etc. But unable to configure/add in the main interfaces
Hello,
Since multiple weeks (probably since upgrading from 18.x to 19.x version), my Sophos Home Edition reboot multiple times a day and more and more each days.
XG firewall (SFOS 19.5.3 MR-3-Build652) is running on a Promox PVE 7.4 with, for the…
Hi,
I,m going to install Sophos XG home edition to a Protectli vp2420, I know the 4 core and 6GB ram limitation but with 300mb/s internet bandwidth it should be enough.
It would be possible to install Sophos in Raid 1 if I provide Protectli with 2…
Hi everyone
I installed my Sophos Home on a Mini-PC but it does not shows my NICs up.
specs
Intel Celeron J4125
8 GB RAM
256 GB SSD
4x 2.5 GBps LAN (i226-V)
Any idea what can solve my problem?
Thx
Hi, I'm not sure if I have just locked myself out of using XG home firewaill because of an unexpected BIOS compatibility issue.
My ancient PC (Pentium III) mobo died. It was running XG 19.x.
Researching for microPC's (ServeTheHome, Tom's Hardware…
I'm looking to utilize a 2Gbps symmetrical connection on an XGS116. Based on the specs, it should be able to handle 7.7Gbps, or 2.0Gbps with NGFW enabled. I've currently got the upstream CPE connected via a 10Gbps SFP+ module to a CS110-48P on its own…
Does the newly released SFOS v20 support newer fanless PCs containing the intel i225 ethernet chips, WITHOUT resorting to a VM?
I suppose this is a resurrection of the question that was answered in the negative for v. 19.x last year in Does Sophos XG…
hello
i have a huawei gpon that i want to use with my xg210 - after checking the page of compatible sfp i am not sure it work
can you guys help me please , it is an sfp
Hi folks,
built this XG test box on a XM a couple of days ago and proceeded to loose the password. Please advise how to reset a lost password on an XG installed on VM?
Thank you Ian
Hi all,
I recently got my hands on a used SG135rev3 appliance and tried installing XG home edition on it.
After installation, I see in the commandline (via HDMI) that the appliance has succesfully booted up, but unfortunately the LAN doesnt come up…
hi I have a Cyberoam CR100ing firewall (1.6.3 MR-4) in my hands that I got from my previous job and I plan to install the new Sophos XG home edition OS on it since it is the most compatible with the hardware today. What happens is that the Cyberoam cr100ing…
Dear Community Member,
during the task to refresh our firewall Hardware, we try to install SW-19.5.3_MR-3-652.iso on Dell PowerEdge R350 but it fails, mount iso over idrac stuck at ISO boot without any output. Secound try was to make USB Boot Stick…
Hi
I am trying to resize the data disk following this KB https://support.sophos.com/support/s/article/KB-000036775?language=en_US after restarting the VM and selecting from menu 5, 3 through putty, this is what I am seeing.
it's not resizing it…
Hi Team,
I recently install FW on VMware but issue is the login web page is taking too long to load. Using ssh I can easily and quickly go to the device setting but managementip:4444 is taking too long(20-30mins) to load. I used all the browser but…
Good day to you all. Am looking for some assistance and tips on deploying XGS firewall in azure. The current setup, we have 2 servers that are currently deployed in azure and we would want to protect them using XGS. Currently users RDP to the servers…
I have some questions regarding deploying the Sophos Firewall Home Edition.
Does anyone have any recommendations on hardware to use and to avoid?
I would like to look into something small and compact if possible. A plus if it's easily mountable…
Hi Guys, i recently acquired a sophos XG 106, The issue is that whenever i connect a Access point to the LAN Port such us ubiquity or any other one. it constantly drops the connectiion every 5 min or less, this behavior happens on every single port, i…
Hi,
I just upgraded my internet to 1gbps down and 50mbs up.
Running a speedtest from a workstation yields 200/47. I disabled IPS and it slightly increased to 270/47.
I ran multiple CLI based speedtests from both geographical close servers and…
Today I got a brand new sophos xgs 116 firewall.
This device has an absolutely loud and annoying fan-sound that crashes my ears.
I cannot remember, that older xg sound similar.
Does anybody else experience this high and loud fan with new devices…