• DNS server behind XG firewall NAT

    Youcef Rahmouni
    Youcef Rahmouni
    Hello community, Recently i was asked to migrate an existint configuration from a router to XG firewall and here is the scenario : an application running in my local server with the name : transmission.local.co IP@ is 192.168.62.11 DNS serve r…
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • DNAT ERROR

    Christian Garcia N
    Christian Garcia N
    : Buenas tardes. Explico mi situacion por si alguien me puede ayudar. Tengo que instalar varios dispositivos a los cuales se accede por el puerto 80 (http), me indican que necesitan poder acceder desde el exterior a cada uno de ellos, por lo…
    • Answered
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • XG 210 - DMZ web server traffic not accessible from LAN.

    David Harrison1
    David Harrison1
    Hi all, I've setup a web server in DMZ and its working externally (showing web pages). but any PC on my internal LAN cant see the web pages? port2 = wan port. port3 = dmz 1. added web server to "web server" tab, 2. added Rule to allow […
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • I want to open 80 firewall port please help us

    KM Sugar
    KM Sugar
    For my attendance software person wants to open 80 port for access attendance software from other network or out of office
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • Sophos XG firewall seems to be blocking push notifications from Firebase Cloud Messaging...

    XDS Admin
    XDS Admin
    We are doing some mobile app development involving Google’s Firebase Cloud Messaging (FCM); we’ve noticed that inbound push notifications aren’t coming through and I am suspecting they are getting blocked by our Sophos XG firewall. I’ve read where ports…
    • Answered
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • I CANNOT ACCESS INTERNAL PORT WITH BRIDGE MODE.

    Barnabas Amiolemen
    Barnabas Amiolemen
    My appologies. Ii have CISCO Router facing the ISP, I configured NAT and port forwarding on the CISCO ROUTER. All the staff can access the internet and also i am able to access the port that i opened for the external users. When I scanned, it shows port…
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • XG Port Forwarding

    hoosty
    hoosty
    Am I wrong or ist XG a pain in the a...? I try to forward a simple TCP Port for Synologys Hyper Backup, but the Port stays closed whatever I do. I use the Server Access Assistant: I think the Assistant is that simple, what do I do wrong…
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • Red 60 Standard/split mode port forwarding

    Ahmet Sirikligil1
    Ahmet Sirikligil1
    Hello i have xg 330 and in branch red 60 Standard/split 100.50.20.x Tplink global IP:85.85.85.x local IP:192.168.1.1 i want to forward 3389 port to server 192.168.1.x how to port forward Thanks
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • Multiple Public IPs on one WAN and Portforwarding

    Patrick Merkel
    Patrick Merkel
    Hello guys, we have 3 public IP's on our provider. The xxx.124,xxx.125,xxx.126. The main IP on WAN/Port2 is the xxx.124 and is working fine. But some customers/services need access to the xxx.125 and xxx.126 (OpenVPN from a pfsense). But thats…
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • No interface filter on automaticaly created reflexive rules

    Freddy86
    Freddy86
    After having some trouble for a couple of days i found that if i create a portforwarding using the gui (DNAT) rule, XG creates 3 NAT rules. DNAT, loopback and reflexive. The DNAT rule comes with a inbound filter for the wan interface. Lookback looks fine…
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • DNAT Issue

    Kevin Holderbach
    Kevin Holderbach
    FYI -prior to v18 never had these issues... so, not sure why its a problem now. I am doing something very basic - a simple DNAT to a local server on my LAN / port 443 access. I have a WAN interface along with additional static IPs. I created an…
    • Answered
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • Going Crazy with Port Forwading - Wont work!

    Patrick Merkel
    Patrick Merkel
    Hello guys. I have a XG330 with 18.05 MR5. Port2 is WAN coming from a FritzBox (Exposed Host). Its an public ip. I have a VLAN on Port 7. There is a video recorder with port 851 and 8510. I created a firewall rule with Source Zone = WAN…
    • Answered
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • Simple DNAT rule created with Server Access Assistant does not work

    CarstenDE
    CarstenDE
    Hi all, I created a DNAT rule with Server Access Assistant under SFOS 18.0.5 but it does not work at all. Here are the screenshots of the rules: NAT rule: Firewall rule: Service definition: Here is the TCPDUMP. Out interface Port2_ppp…
    • Answered
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • RDP Access Logs

    Mandeep Singh5
    Mandeep Singh5
    Hello Sophos Community, This is my first post, happy to be here. How do I access RDP Access Logs on XG330? We have rules that map WAN access and route them to RDP IP's. Thanks Mandeep
    • Answered
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • Maintaining incoming IP address when routing traffic

    Project2501
    Project2501
    Hi, I'm a bit of a novice when it comes to networking and I'm slowly getting to grips with it so please bear with me. What I have at the moment is this: The IP's aren't real (clearly) but it's the basic gist. The problem I have is that both…
    • Answered
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • Sophos XG 125 İnterface is so mixed

    Süleyman Akpınar
    Süleyman Akpınar
    Hi, Sophos interface is so mixed to adjust any DNAT rules. For example I want to set this simple rule but realy it is not easy to understand what we do. Fom example : My Public İP : 1.2.3.4 My public Port : 1010 My friend Public İP : 5…
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • Unable to get Plex working remotely

    Shank Mohan
    Shank Mohan
    Hi, I have been through the various posts on the forum and still unable to get my plex server connected remotely. Plex server internal IP: 192.168.99.33:32400 The server is a VM, which has a dedicated NIC, plugged straight into the sophos appliance…
    • Answered
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • Sophos XG SSL VPN Client - Remote Desktop Abbrüche in der Verbindung

    TerryNeumann
    TerryNeumann
    Liebe Experten, seit der Umstellung von der Sophos UTM auf XG haben wir Probleme mit der RDP-Verbindung über eine Sophos SSL VPN. Unsere Mitarbeiter melden, das die (RDP-) Verbindung zum Server (oder auch Clients) häufig abbricht und die Verbindung erst…
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • Firewall rule for internal web server access

    Sophos Redsquid
    Sophos Redsquid
    Hi, Looking for a bit of help, I have an XG210 firewall in place and need to access a webserver via port 80 on the internal network which listens on port 8040. Currently, with the rule in place, I can see the webpage appearing slowly with some elements…
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • Allow external ip

    Nicolas DOY
    Nicolas DOY
    I cannot allow traffic from an external ip and a specific port to my local server. I tried differents things but it doesn't work.
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • Delete a DNAt Rule from CLI , accidently forwarded all ports to another machine

    Janam Khatiwada
    Janam Khatiwada
    Hello, i accidently click incoming connection to any while setting up Dnat and now i cant access sophos webportal, how can i delete this DNAT rule , is there any way to delete from cli?
    • Answered
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • RDP port forwarding with XG115

    Nikita Baranov
    Nikita Baranov
    Dear Team, I have looked through similar topics in this community but still was not able to enable RDP port forwarding from external network to a dedicated host within internal network. Please advise on what is configured wrong. I have created a firewall…
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • SFOS 18.0.4 MR-4 port forwarding configuration

    tn_nb
    tn_nb
    Hi, We would like to get an example configuration for port forwarding with an external port and a different internal port. For example I would like people to hit my RDP with port number 3356 and forward it to my internal server port rdp (3389…
    • Answered
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • DNAT Problems on MR-5

    David Moro
    David Moro
    I've a simple configuration on XG86, Just a rule for navigation and a DNAT. If i try to reach the exposed service fails, my log say that fw rule and nat rule is correct but still reach the service. No strange routers or double nats. Any suggestions…
    • Answered
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • Port Forwarding a Minecraft Server

    Yasha Burns
    Yasha Burns
    Hello, I've setup a Minecraft server on one of our computers, and I tried using the wizard in the NAT Rules section. I have been working on this all day and have been reading other posts and nothing seems to work. Thanks, Yasha.
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • View related content throughout Sophos Firewall
  • More
  • Cancel
<>