Hi All,
I am new to Sophos XG coming from pfsense and have to say I will be staying, great NGFW. I have a slight issue though, one which I am sure is simple to solve.
I have used the server access assistant (DNAT) to create a port forward rule from…
hi all,
got a DNAT like below, blanked the fields out due to privacy
do i need to change my inbound interface and outbound interface to the correct ISP as i have two ISPs, so it could be going out wrong ISP, or will it pick the right ISP to go out…
Hi all, I've been having an issue with my Minecraft server I host since switching over to Sophos. The Minecraft server functions normally with DNAT and the server is accessible from outside, except for this error below.
Here are my FW/NAT rules…
I need a help.
I made a DNAT configuration on our sophos XG 210, to able to access some service on our network but until now, when i try to check if the port is open or not, still closed and service not work externally, using public ip.
screenshot…
Good Afternoon,
I need some advice on how to best setup my firewall for Github Webhook forwarding to a Jenkins web-server.
- My Sophos: SFVH (SFOS 19.5.1 MR-1-Build278)
I have tested the following request successfully, in triggering a jenkins…
al crear la regla con el redireccionamiento hacia el puerto de la pagina este no lo realiza correctamente, aparece un error
Bad Request Your browser sent a request that this server could not understand. Reason: You're speaking plain HTTP to an SSL…
I need to setup port forwarding to send traffic going to my wan interface on port 444 to an internal server on prt 443, i hav etried every ttorial i can fid on the internet and nothing seems to work.
can anyone suggest a tutorial that works and is…
Hallo,
die Sophos UTM konnte Zeitserver spielen, die XGS ja nicht, deshalb die Frage.
Kann ich eine Portweiterleitung einrichten von allen Ports (außer WAN) Port 123 zu einem im Internet befindlichen Zeitserver oder Zeitserverpool?
Gruß Geral…
Dear All,
Would like to seek for your help, i have the following firewall rule from Sophos 17.5, i would like to create the same rule in Sophos version 19.5, how do i create it under firewall rule + NAT rules for the following ? any help would be…
By default, the agent's port is 161 and the manager's port is 162, but many internet operators here in Brazil leave this port blocked, which makes it impossible to access the firewall's SNMP. How to change this default port?
Hi Guys,
i have a DNAT rule active for our Phone System, but i´d like to make some restriction for some public ip in order to block the traffic before the dnat rule applies.
The "exclusion" section in the DNAT rule doesn´t work, someone can give…
Hi,
I work for an MSP and we host client backup data in our data center. I am evaluating switching our Draytek 3900 firewall for a Sophos XGS device. Before we commit to a purchase I am using an XG230 as a test platform to see if it will do what we…
Hello I have searched and can see others have this issue, however none of the solutions have worked for me so far. I have followed the steps at https://docs.sophos.com/nsg/sophos-firewall/19.5/Help/en-us/webhelp/onlinehelp/AdministratorHelp/RulesAndPolicies…
Public user are accessing local URL (http://117.x.x.x:3000) successfully, but internal LAN user (192.168.16.10) want to access by public IP , but cant access URL : http ://117.x.x.x:3000,
what is the solution,
Hello,
This is the "scenario".
I have a Vmware network on which a number of servers (Domain controllers, administrative management servers etc.) are virtualized.
Connected to this network are physical devices such as clients, printers etc.
The…
After updating to v19.5 the back-up to the remote location stopped as this was relying on udp port 1194.
Internet: Experiabox (DMZ) --> XGS 126
The settings are given below. Any idea how to solve?
---
John
Hi, hoping someone can help. Apologies for the long post.
*** This looks like a repost from another user but for some reason when I logged in to the community recently it set up a new account for me. I am the OP of this thread**
ALSO, Although in…
Hi I have a firewall who is behind an ISP router The wan port is connected directly to my ISP router via PORT 2 and i've assigned to it a private IP@
Now when deploying RED devices , the support asked me to give the Port 2 a public IP@ , wish i don…
Hello, i was trying to open the PORTS to all Internal users, but the rule still blocking the access.
please verify that am doing port forws correct way for all internal users.
Thanks
Hi,
I am trying to create rule on firewall so camera monitoring company can check our cameras from outside. I need help to setup this firewall rule.
Thanks
Hi.
I'm running SFOS 19.0.1 and are currently migrating my mail. We have our own antispam (Xeams) placed in our DMZ and have no subscription for Sophos antispam solution. I really need some guidance on howto make Sophos work with an existing antispam…
Hi all,
I need some help.
recently I installed a new server with a web application to be accessed by LAN users.
I must open the application port (8070)in the local network to be accessed by users using web browser.
thanks
Hello,
I 'm using a Sophos XG firewall. When I generate a Buissness Firewall Roule and want to save it I get the popup:
"Invalid port in mapped ports list/range"
This also happens when I try to clone a existing Buissnes Roule .
Can anyone tell…
Hi, hoping someone can help. Apologies for the long post.
I'm currently building a Sophos XG appliance to replace my UTM9 as I've exceeded the 50 IP limitation on the home license. Rules and filters etc are slowly but surely being recreated in XG but…
New to Sophos. Was able to set up DNAT on my XGS 126.
The rule above is working, but how do I limit the UDP to a specific port#? When I try to edit UDP I'm not able to save that value.
---
John