Hello, I'm having a lot of trouble finding this one simple answer. How many simultaneous users can I have on my AP APX 320 per band? Both theoretically and practically I've found this recommendation, but it just says that Sophos tests his AP with…

Hello, I have an AP55 that first I need the default credentials for OpenWrt login once I know them I will probably need the password reset because I have tried several ones. So I basically need to know how the reset the password via Openwrt or be…

Hi, Currently I have implemented a guest wifi network with a radius server, everything works perfectly. Is it possible to implement that the users can register themselves on the radius server? So far in the tests I have done, I am the one who manually…

I have one location that unlike other locations, wifi AP's are not controlled by the local XG UTM, but rather they ( APX320X) are controlled via Sophos Central. I have setup a guest type network not bridged to the local LAN zone networks and the IP…

I was planning to buy a second hand Sophos Wireless Access point but noticed the paragraph " Note: According to FCC regulations, all WLAN devices marketed and sold in the U.S. must be restricted to U.S. channels only. Therefore, the country code selection…

Any update to when the WIFI 6 models will be released? I see mentions of it on the roadmap and release potentially last year. Any updates on these as I'm looking to upgrade my network with a new firewall with Sophos, but we require WIFI6

Hi everyone I would like to know what is the range of AP55c APs in 2.4GHz and 5GHz frequencies? Thank you

Switched from XG management of an APX320 to Sophos Central management. Things went pretty well. A couple of suggestions: 1. It would be nice to be able to bulk-upload static IPs to the XG's DHCP server. When I killed the VXLANs and added VLANs, it was…

Hello, Is there a possibility to query if a specific wireless client (e.g. MAC address) is connected to the network or a specific APX Access Point through an API? Thanks Robert

Hi experts. I recently buy two new devices, Sophos FW XGS 136 appliance and AP530 wireless Access point. I am trying to put them to work togheter but not having success. I have registered I can manege Firewall va Sophos Portal, also same as AP (when it…

I run SFOS 18.0.5 MR-5-Build586 on my own hardware at home, with an AP30 for domestic Wifi. I plan to upgrade my AP when a Wifi 6 access point becomes available. Yesterday I upgraded my SFOS to 18.5.1 MR-1-Build326 to find that my AP no longer works…

Hello, my APX320X keep rebooting, after start it is getting IP from DHCP (separate DHCP server controller ) After that I'm able to ping the AP IP for 20 seconds, Led status is blinking red after that it goes unreachable and this scenario continue…

Hi Team, we are using sophos AP55C, We have 3AP but suddenly AP drops connections, and sometime its not switching connections from one AP to another. please help me out. Thanks in advance..........

Hello. I have two configured AP 55 (were in on other warehouse) and want to use them on a other SG125 (Ver 9.706-9). Everything is physically connected but I don't see the AP in the "wireless protection". How can I reset the config and use them on the…

We had a series of APX320 Access Points registered on Central on a Wireless Trial. The Customer decided not to use Central after all. We then removed a few before the end of the Central Wireless Trial and connected them to an XG without problem. …

Hello, yesterday a new research has been made public about design and implementation flaws in WiFi. See https://www.fragattacks.com/ Is there any information about these vulnerabilities with Sophos APX devices yet? There is a tool to test Wi-Fi Clients…

Sorry for this noob question. I am a bit confused about the radiation pattern of APX access points. I came across some debate about "wall mount vs ceiling mount" so I search the Sophos APX documentation for the radiation pattern of the APX access points…

Feature: Scheduled reboot of Access Points Thanks for the Reboot button in wireless on XG Firewall! Since v18 my AP traffic comes to a screeching halt after ~24 hours and I have to Reboot the AP (using the new button). Maybe a memory leak or table…

Hi All, [Update]: RESOLVED - The problem is resolved in Sophos Central, but the Access Point needs to be re-registered. Please follow the Steps in "Resolution" Some customers may have intermittent issue where the Access Points are not able to connect…

Greetings, I've got 4 AP30 devices. One is doing just fine. The other 3 were disconnected for a construction project. I'm guessing there was an update to the AP30's while they were disconnected, and now they don't react to the UTM. These 3 AP30…

I currently have a Sophos UTM220 and an AP30, i'm trying to get the AP30 to broadcast two separate SSID's one for a password protected network and one for the guest network which will be open. My Sophos UTM220 is running in bridged mode with web filtering…

I have a steady green light on a AP55C. As I understand it means it can't boot. Most likely it's a faild firmware upgrade. Is there any way to unbrick it without having to send it to Sophos? No console port, no reset buttun, no nothing.

I have 2 x AP50 connected as a Mesh (5GHz), this is a back haul network between 2 locations, that are very close (less than 5 Metres). why is it that I cannot get more than 20 Mb/s download across this mesh (when the internet connects at 40Mb/s download…

Hello. I'm trying to monitor via SNMP SOPHOS Wireless APs, without success... Does anyone know if SOPHOS APs have SNMP enable/MIB definitions/or something else? Any enterprise product should have a way to monitor it. Thanks, Mattia Trussardi

I've got a UTM 120 fully up to date with v.9.5, and working fine with an AP15. When I connect an AP55, it gets DHCP'd an IP address, but nothing more. From the firewall live log, I can see it trying to connect to the default gateway for that subnet…