Good morning! We currently have a Standard/Unified configuration with XG125 in the Head Office and SD RED60 in the Branch Offices, all traffic goes to the Head Office. I would like a suggestion on how to make this communication not depend on the firewall…

We had upgraded our internet connection from 80 down/20up to 300 down/150 up. When I did s speed test on the router in front of my RED device it was the right speed, But when I did the speed test behind the RED device I was only getting 150 down/ 150…

Hi all I wanted to post on here so if anyone else comes across this then it may help them I've got a customer with UTM and 40+ REDs, been running for years with mixture of RED10, RED15, RED20 and RED50. I'm now upgrading some sites to RED60 but…

Hallo zusammen, folgendes Problem: Interface 1: TK Netzwerk: 10.2.10.0/24 Interface 2: RED60 10.3.10.0/24 Telefon IP = 10.2.10.30 (steht hinter der RED) Tunnel besteht, Pingen geht auch. Telefon findet aber die TK nicht trotz fester IP-Adresse…

My team purchased several of the 3/4G Modules for the RED 60 devices and they are not working. The modems have been verified to work in a XG 125 and pass traffic in that UTM fine but when connected to the RED 60 we get nothing. Verizon is supported as…

After I set up a RED20, I plugged an AP into it, as I wanted to have an AP behind the RED20. I have it in Split-Tunnel Mode. The issue I had was that the AP would not show up in the list of new APs to authorize, on the UTM side. I read many many posts…

Hi, I am trying to use the 4G Module in a RED 20/60 Device. Configuration is set with 3G/UMTS failover and APN / Dial String set correctly. Using the USB-Dongle E3372 it is working and connecting via failover. Then I put the Sim-Card from the E3372…