Hello. I'd like to change my home UTM-9 hardware from an old PC to one of the newer QOTOM-like devices. I need four NICs - WAN, LAN, 2 WLANs. Price is an issue, I'd like to keep the total < CDN$375 (US$300) if possible. I'd appreciate recommendations…

I got an used UTM 220 appliance cheap and thought I would put UTM Home on it. Loaded fresh install from iso. connect laptop to eth0 (LAN) and it gets no network connection. tried hard coding an IP on laptop nic, still says no network connection. The green…

Sophos UTM 220 rev 5 *UNOFFICAL* Hardware Upgrade Checklist Not very much information is available on these hardware appliances. For the longest time searching, all I personally could find was information relating to RAM (which at the time was 4GB)…

Hello everyone, i have a question with hot to get my Serial LCD display in my old Smoothwall (caswell) utm box and was wondering how to get it to work as all the other guides require the version 8 Utm iso. so my question is can this be done without…

We recently bought two more Supermicro Servers to be used for our Sophos UTM (Sophos UTM 9.502), but it looks like the installed Intel X710/X557-AT and X550T are "ignored becuase it lacks a name (buggy hw?)" Other OS like RHEL 7 or citrix XenServer…

Hi, I have SG125 and there are 8 ports on this model. I see there are three (eth0 - eth2) network cards i354 (intel corporation Ethernet connection I354) and others(eth3-eth7) are i211 (Intel Corporation i211 gigabit network connection) Does anyone…

Hi, we have 2 SG650 and both machines are connected via port eth0 [MGMT1] to administrate these. At the moment our active-passive cluster ha interface is on etc2 [A1]. Does something speak against it to switch the HA interface onto eth1 [MGMT2]…

Hi everyone Anyone uses SG125/SG125W at home, I want to know if it is noisy. Still thinking of buying a fanless mini PC but I would need separate switch and AP. Thanks

We have a SG210 UTM with Firmware Release 9.501-5. We made a backup of the configuration for restoring it to a new hardware (also a SG210 UTM). The new SG210 has a 30day trail license and was manually updated to 9.501.5 and has the default IP Adress…

Hello everyone. I'm brand spanking new to the concept of UTMs in general and Sophos in particular; but I'd like to use it to protect my home network. I'm about to purchase a barebones mini PC to use for installing SOPHOS UTM Home edition on it. However…

Hi, Wich PCI-E W-Lan cards are compatible with UTM Home to use wireless protection? Thanks in advance - Meghan

Hi, I'm doing some testing on Sophos UTM 9.5 ASG. I have an ESXI 6.0 server with 4G USB dongle connected to it (Huawei E3372). I added a USB controller and SCSI device to map USB to VM but I can't see it when I try to add a new interface under hardware…

Hi All, I have just bought the new ZOTAC CI547 with the new i5 Kaby Lake processor, and i put in 32GB Ram and a 256GB SSD HDD in it, so i will be extra fit to run the Sophos UTM for the next years to come. I could prior to my purchase not find any detailed…

All I have a client with a Sophos ASG220 rev. 5 running on a software license (recovered unit, dead HDD replaced with an SSD, RAM upgraded) and they're complaining about the noise coming from the fans. I'm planning to replace them with Noctua A4x10…

We are facing issue whenever we perform firmware update, while running Up2Date patches getting installed successfully and post reboot we lost access to devices. In the above case 1. We can access device by using console/ HA interface i.e. ETH0 only…

It's only seeing eth0 and won't allow me to add the 2nd interface , which is defined in AWS with a Private IP. I want to use this second interface as my inside interface. Basically, the Sophos UTM console isn't seeing the other interface that I want to…

I have a very odd issue whereby when I reboot my UTM firewall some of the interfaces are mapped to different NIC's than before it was rebooted. For example, before the reboot I did last night, eth3 was assigned to the interface with a MAC address…

Hi All, I am about to purchase 2 X HPE ProLiant DL360 Gen9 1U servers with the following specs: 2 X HPE ProLiant DL360 Gen9 Xeon E5-2620V4 2.1 GHz - 16 GB 2 X HPE Value Endurance Enterprise Value M1 Solid State Drive - 240 GB - SATA 6Gb…

Hello, I have been using Sophos UTM Home for a number of years on my Vmware server (ESXi 5.5 and now 6.0) without any particular issue. However, I'm now considering to move all my VMs to KVM. I understand that Sophos UTM shouldn't have any issues with…

I follow lots of threads of people building home grown boxes for their UTM and its a great project i would love to do, however the reality of my life at the moment is i have money but very little time. I need a hardware solution for UTM home edition…

Hello I'm using an old HP Desktop with 2 NIC's and an Intel Quadcore Quad Core2 Q6600 @ 2.4GHz. This device is to slow for my home as I have a symmetrical Gigabit fibre connection. Unfortunately I bought a Shuttle XPC slim XH110v with i7-6700, 8 GB…

Hi guys, I want to migrate my virtuell UTM to a small, passiv (needs to be completely silent) hardware device. I did some research and found this little barebone device which looks really nice to me and is often used by others with pfsense: QOTOM…

I decided that my old Astaro8 firewall has got a bit long in the tooth and an upgrade to UTM9, with the integrated WiFi would be worthwhile. Since I have only a small home network, unlikely to see more than 3 simultaneous users, I decided that a Jetaway…

Hello, Since a couple of weeks I'm making a hardware inventory to be used for SG UTM 9 at home (without a hypervisor). There's a 500/500 fiber connection, 4 users with multiple devices. My intention is to use IPS and ATP. One of the difficulties is…

Hey Everyone, I'm quite new to the Sophos world, I recently installed a SG115 UTM and I have to say it is running fantastic. While checking up on it to make sure it is running healthy, I have been noticing the swap usage increasing steadily at about…