Hi There, I just bought my first AP50 for my UTM Home and tried to install it. I connected to the UTM successfully and gets marked as active, I can even configure it. The weird thing is, it does not broadcast its radio. The two LEDs for 2,4GHz and…

I've just connected some SOPHOS AP-55 Access Points to my UTM-protected network. Guest traffic is on a separate zone, with addresses in the 172.16.28.0 subnet. It works well, except for two things that do not. One of them is Gmail on the stock email application…

Hey there, i have 3 REDs deployed and one HQ Firewall with 5 other branches connected through managed MPLS. After exchanging the internet router at one RED branch the wireless authentication for the notebooks stopped working. This is only happening…

Hi to all! Ok i'm sure i missing something but this is what really happened! I configure a WiFi Network bridge to a VLAN with an Hotspot and voucher. I connected to this wifi network with a voucher code and after some time i wanted to remove that device…

I have a SG125 with the latest software and updates etc. and 2 x AP15 access points on the LAN. First of all is there a document explaining the best practice for setting this up with a Guest WLAN? The "Staff" SSID is bridged to LAN AP and a "Guest…

Hi Everyone. My Name Wason. My Question and Problem. I Try Use Zotac ZBOX Mini-PC CI323 Nano and Install Sophos UTM 9.407 But Sophos UTM Cannot Found Driver Wireless Only. Dual LAN Ethernet Realtek Gigabit Found OK. Because I Want Use Wireless of Zotac…

Hi there, I have a SG 125W and an external AP-15 configured with internal and guest SSID's. The AP-15 works fine I can manually set the channel to the required channel correctly and users are able to connect and the system works very well. When…

Hi all. We have a 320 UTM with firmware 9.405-5, one AP30 and two AP15. Currently, there is a wireless network with WPA2 Enterprise on a Windows Radius and a guest network with Hotspot enabled. Everything working fine. Now, when we add a new AP…

Hello together! I recently got asked by a customer what the addition "(on wlanX)" behind the wireless networks name means. I think, that this is a virtual interface which is created after adding a new wireless network. But I really have no clue where…

Hello Im trying to get the following working: I want one SSID for access of the internal network (without vlan tagging, 192.168.43.xx) -> Bridge to AP LAN And one SSID for our guest network (with vlan tag 40, 172.16.29.xxx) -> Bridge to VLAN Now…

Hi, We just got a pair of AP100s for our UTM9. I'm also making a switch from Apple Open Directory to Active Directory. I have my AD server up and running (and working). I enabled Radius and got it working; it works for VPN clients. However, Wifi clients…

Hello everyone, is there a way to define a Hotspot with a session length of more than 1 week? Colleagues are complaining, they have to renew their phone-logins every week. I understand this, but I found no other way. I need to distinguish Mobile-Phone…

Hi group. i just installed the asg-9.351-3.1.iso (ASG Software) to a computer. it's running firmware version 9.351-3. once installed, i went on the web gui, to finish setup and when it was asking for network, it did not displayed the WIRELESS card…

I have a wireless bridge to my internal LAN. All of my wired users are able to browse the network and see shares, etc. None of my wireless users, however, can do this. If a wireless user manually specifies a share to connect to, such as \\Resource\share…

I am trying to configure a Hotspot on our wireless network that uses back end authentication from our AD server. I have successfully created a hotspot that is being broadcasted on our AP's when you try to connect to the SSID the login screen appears and…

Running the latest UTM on a Hyper V with no VLANS and a fairly simple setup. We have an internal network running in transparnet filtering mode with a Wireless network bridged to it. This works well except for the constant need to authenticate on the…

Hallo, ich habe mitttlerweile einige Fälle bei denen sich ein Surface 4 Pro nicht sauber per W-Lan zur SG verbindet. Mir ist bekannt dass es an den Treibern des Surface hängt, vieleicht hat aber einer von euch einen Workaround um das Problem temporär…

Hi, Does anyone tried to cascading mesh ap's? I need to mesh another ap behind a mesh ap. Either: --- Root-AP ))) (((AP))) (((AP))) (((client Or: --- Root-AP ))) ((( Bridge-AP--- Bridge-AP))) (((AP))) (((client Some suggestions or comments are…

Hello, we have about 50 AP100C's in our environment. When I look at the connected client list, its just a list of Mac Addresses. I'd like it to display the actual hostname of the device connected to a particular SSID or AP. I have tried adding the in…

I'm trying to bridge my wlan interface to my eth0 interface but I can't get the wireless interface to show in the list of NICs to add to the bridge. I've tried the wlan interface as seperate and bridged to AP lan. Any ideas?