Hi, ich habe eine SG135 und nutze sie in Verbindung mit einer Fritzbox 6591. Der Aufbau sieht wie folgt aus: ETH0= WAN / Additional IP UTM 172.10.0.2 (Fritzbox 172.10.0.1 / WLAN 192.168.3.0/24) ETH1-7= internes LAN 192.168.4.1 (192.168.4.0/24…

I have a basic IPSec VPN configured at the moment (PSK, Username, Password) which allows remote users to connect via Sophos Connect. However it doesn't seem to lock out after a certain number of tries at logging in. Is there a way to prevent brute forcing…

Hallo Zusammen, ich kürzlich auf meinen beiden Sophos UTM 9 bei einem Tunnel folgende Fehlermeldungen: 2023:01:04-13:28:33 vpn-2 pluto[12183]: "S_REF_XXXXXX"[190] XX.XX.XX.XX #233353: Quick Mode I1 message is unacceptable because it uses a previously…

Hi, our company policy prescripes an up to date OS for computers used in homeoffice. Now it's my job to check... Neither terminalservers nor terminal-Licensing, nor anything on our UTM that i've checke give us this information. Any idear in the…

Hi Community, we're experiencing a weird problem. We have just got installed a new router from our service provider which connects us to a 192.168.200/24 where our Telephony Server is located. There is a working route on our coreswitch( 192.168.14.39…

Hi, I have a new project for the implementation of security infrastructure in organization and I want to set up all thin clients when they start up windows, Sophos VPN clients connect automatically. Any help? Regards.

The Sophos VPN client does it only work on SSL or can I use it with L2TP over IPsec? Thanks,

We instaled two sophos utm on instaces in aws. The instaces have a elastic ip, and we tried to conected each other by VPN IPSEC. We add the elastic IP like a remote gateway but they can't conected.

So this is basic I'm setting up a firewall rule to allow specific VPN traffic Here's the specific service definition Attempting to setup a VPN, I get this... Here are some of the same drops from the full firewall log Why is this traffic…

Hello, I just deployed a new UTM 9 firewall from AWS version ( 9.705-3, i know this is an old release, i tried to newest version and it was the same result so i tried to downgrade to see if it helps). I created my Remote Access VPN profiles and when…

Hello Guys, I am currently trying to setup two different IPsec VPNs. The first one is to simply connect to our Network and the other one is to route all traffic threw the firewall, if you are in a cafe for example. So far so good. They both work…

I typically connect to multiple XG firewalls using a L2TP connection. Issue is when I disconnect I get an email alert that the session was terminated (I know, I terminated the connection). As an MSP, I get alerts for a lot of things, and this seems entirely…

Hallo, seit dem letztem Wechsel der Root Zertifikate bei Let´s Enrcypt läuft der Appel VPN (Cisco VPN Client) nicht mehr. Die neuste Version 9.712-12 ist eingespielt. Die CA´s und die Domain Zertifikate wurden alle gelöscht und neu erstellt mit…

Hallo Community, auf einer Sophos UTM 9.711-5 habe ich das Problem, dass gelöschte Objekte scheinbar doch nicht endgültig gelöscht werden, sondern unsichtbar weiter existieren. Hintergrund ist, dass wir bei einem alten Kunden eine Site-to-Site VPN…

We have recently had an internet speed upgrade which gives us 1Gbps Down & Up to the internet. When running a speedtest connected directly to our network in the office we are getting around 950mbps. When the client runs a speedtest while disconnected…

Hi Has anyone successfully been able to install OpenVPN Client alongside Sophos Connect v2 client? It appears that because the Sophos Connect v2 software utilises the OpenVPN service for SSLVPN connection you can install them together but not have multiple…

Hi, ich muss Datenverkehr über einen anderen Internetanschluss übertragen, da dieser Providergebunden ist. Hierzu muss ein Server über den VPN über das HQ in das Internet. Konkret geht es um eine TK Anlage die den SIP Trunk nur über die IP des HQs…

The client can conecct to the VPN from Windows but the problem is even he can ping, can't resolve the domain, anyone seen this before?

Hello, all of our users can't connect via SSL VPN since yesterday afternoon. I tried the connection via the old SSL VPN Client and via the new Sophos Connect client. Both don't work. I tried it with a new config file from the UTM, no difference. …

Hello, since the last firewall update we are forced to use the new Sophos Connect. Sadly there are connection problems with this client. I can properly connect via the old VPN SSL Client. If i uninstall it and install Sophos Connect the authentication…

Ich habe hier mal ne Sauber Funktionierende VPN Konfig für Sophos UTM 9 zwischen FritzBox <--> UTM Quelle: https://confluence.home-hosting.de/display/IN/VPN+zwischen+FritzBox+und+Sophos+UTM+-+Update%3A+12.05.2022 [Mein eigener Confluence Server, die…

Hello all, Somehow I missed getting the EOL notices for SSLVPN and only saw the information this past week when looking at FW 9.710-1 upgrade . I'm having my end-users, log into the present portal (9.709-3), download their .OVPN config, uninstall 2…

Hi, for a few days now, the SSL VPN cannot be connected if there is an ' inverted comma in the password. We use OpenVPN 2.5.6. Do others have this problem too? Error: Options warning: Bad backslas. Is it caused by a pattern update?

Hi, I installed Sophos SFOS with XG18 on my 2 SG210 Appliances, becuase we need to have more then 1 DHCP-Relay. But even with Firewall XG the IPsec Site-to-Site won´t work. I configured it for 3 VLANs like mentioned here: https://docs.sophos.com…

Hi, I have two SG210 with UTM 9.709-3 installed. One is at the headquarter and the other at the branch. At the headquarter I set up IPsec with remote-net 192.168.11.0/24 and branch 192.168.12.0/24. VPN-Pool (IPsec) uses 10.242.4.0/24. The headquarter…