Hello Sophos Community, Is there a way to validate inter-VLAN routing on a UTM9 appliance? Our network is setup using 5 or 6 different VLANs and everything has been working great and as expected for the past few years. Recently, I created a new VLAN…

Hello! I have a Sophos UTM version 9 (9.707-5), which is setup as a firewall and a VPN server for remote access. On Interfaces & Routing > Interfaces , I have two ethernet interfaces, one "External (WAN)", and one "Internal". Everything has been…

Hi all. I have a custom built router using a Gigabyte J1900N-D3V board. To cut it short, inter-VLAN traffic is limited to about 200mbit, but the CPU utilization only ever hits ~30%. Of course standard snort does not take advantage of the multiple cores…

Hello, I have a somewhat unusual situation with my Sophos... up until a few days ago everything was working as expected but we had a power failure that resulted in the firewall shutting down (not gracefully). Since it's been rebooted, all the VLANs…

I recently setup VLAN 2 within our network have everything pointing to the UTM for routing. I can ping the switches on the VLAN 2, but can't ping the host of the VLAN 2 from the VLAN 1. However, I can ping the host of VLAN 2 from the firewall. I've…

Hello I hope you guys can help. I've been playing around with VLANs and Sophos UTM Home both are new to me. I setup three VLANs for my internal interfaces with their own DHCP server and subnet. IP addresses seem to be handed out correctly for each…

Hi! I have 2 WAN static IP. a 1 ip for main sophos wan iterface b 1 ip for server http,.. How can i setup server to use only B IP ( i have license on this server IP), and not main ip form sophos utm for wan Thanks