If this is the wrong forum for this question, I apologize. I did not find one related to the Networking configuration specifically. Context: I am running Sophos UTM 9.718-5 with a Home User licence as my main UTM/firewall device for my home. Up…

I am trying to follow this guide to enable the use of Sonos speakers across multiple VLANs using multicast routing. This isn't something I've used before and I am unsure how it needs to be configured on Sophos UTM9. Basically, there is an Internal VLAN…

Hello, I have two WAN connections. Now I want to the service Port 51413 to use ONLY WAN2 and whole internal network LAN from WAN1. How Can I do this? I repeat when WAN 2 is down I don't want Port 51413 connect through WAN 1.

Hello Sophos Community, I noticed a strange phenomenon when I wanted to set up a guest network. Since this network has no access to other networks and should be able to browse the internet freely, I created a firewall rule as follows: Guest network -…

Right now the WAF is showing as the source ip address in the log files of my servers. I'd like to see the public ip address of the clients that are accessing the servers. I've enabled "pass host header" but that doesn't seem to do it. Is this possible…

I'm using the WAF as a reverse proxy. I'm wondering if there is a way to block or whitelist access by ip address? i found this post from 9 years ago saying it'd be available in 9.3 but if it's available now i'm not seeing it: RE: Source-IP filter…

Hello all, with the update of the official OpenVPN Connect client to Version 3.4 you can't connect to the Sophos UTM any more because of unsupported options. Unfortunatelly you don't get information in the log which unsupported options there are in…

Hello everybody, I have a Sophos UTM 9 on which I administer sophos red 60 with access point 120. I configured the sophos red 60 so that it can provide ip on its various ports. The APX 120 is connected in POE on the red 60. On UTM 9, the AP…

Same here, running multiple HA pairs - SG550s, CPU running at 100% - identified rrdtool process as the culprit. Firmware 9.714-04. Timezone set as London/Europe. Painfully slow to login and administer through the GUI, restarted secondary and waited for…

Can someone connect to their UTM 9.7 firewall and tell me what the permissions are on the /var/log/reporting/rrd folder? Mine for some resaon went mising after I installed 9.714-4 and I would like to recreate it properly so I can run the restarts needed…

Hello, our Sophos UTM 9 ( latest firmware 9.713-19 ) started to block backups of certain systems that always worked before. 2023:01:16-21:05:07 fwname snort[18187]: id="2101" severity="warn" sys="SecureNet" sub="ips" name="Intrusion protection alert…

Hello, guys! I will try to be short. The power went out for a long period a couple days ago and that caused UTM to restart. Because of that web surfing through AD SSO suddenly stopped working. To be more specific, I have no idea why their credentials…

The Problem was first described here : Remote Access via IPSec, Client connected but not receiving packets Currently running Version 9.713-19 of the Sophos UTM 9 SG550 Firewall. Client IPSec version is the latest available : 2.2.75 NAT-Traversal…

Hello, Could I please get some assistance with the below? I'm no expert with UTM's so have no idea what it means. After logging in to the UTM web portal and click on 'Dashboard' on the left i get the below error. " Use of uninitialized value $deploymentType…

Hello, Could I please get some assistance with the below? I'm no expert with UTM's so have no idea what it means. After logging in to the UTM web portal and click on 'Dashboard' on the left i get the below error. " Use of uninitialized value $deploymentType…

Hello, For a few days we have been receiving disturbing mail notifications from our UTM sophos. I hope you can help me to identify and maybe solve the problem. For security reasons, I replaced the public IP of our Sophos UTM. The notification provides…

Dear Sophos Workers, i have the following configuration: Sophos SG direct connected to the internet Sophos XGS behind a Tkom Digibox. Which cipher suites would you take, to establish a stable connection? Greetings Piddae

Hello. This is a follow upto an old thread from about a year ago: https://community.sophos.com/utm-firewall/f/network-protection-firewall-nat-qos-ips/126571/microsoft-teams-calendar-through-waf (that thread is now locked) I've tried again to enable…

Hi On my Sophos UTM 9.709-3 (with default config) I get the sophos email notification only on port 25. How can I setup UTM 9.709-3 to send email notifications over TLS/SSL on port 465 or 587? The Sophos MTA seems only listening on port 25. Thanks…

Dears, The WAN Service Providers changed the router recently, after the router has been changed, the interface stat is up and the link is down, after a troubleshooting session we are sure that the router is working fine and all configuration…

Hello, we have a Sophos UTM 9 SG550 running on latest Firmware 9.709-3. We are using Sophos Connect VPN Client version 2.1.20 ( latest ). We have Remote Access IPSec setup but for some reason some clients when connected ( from their Home ) will not…

Hello All, I am new to this forum and would like to seek help on a particular issue my colleagues are facing when attending Microsoft Teams conference calls while at the office which has Sophos UTM 9 controlling the Internet traffic. While at home due…

Hello, We are getting many http requests in short time from different ip' s. Is it possible to automatically add them to blacklist if a new IP address sending many request' s in a short time?

I have a Fitlet2, with the Intel I211 Ethernet ports. My Sophos UTM has run fine for over 1 year. Recently I upgraded the BIOS to ver. 0.46.01.00 After the update, it appears the Sophos UTM 9.7 does not see or load the drivers for the ports as the final…

I am trying the below code to delete the user with the api url given REF_AaaUseTest but i am getting the response of confirmation and how can i proceed further or how can i give further input for that response to delete the user? import requests import…