We have recently had an internet speed upgrade which gives us 1Gbps Down & Up to the internet. When running a speedtest connected directly to our network in the office we are getting around 950mbps. When the client runs a speedtest while disconnected…

The environment: Firewall: Sophos UTM 9, Model SG330, Firmware 9.710-1 Remote Access (SSL) running more than 2 years now - with the Sophos SSL VPN Client on a HP Elitebook with Windows 10 Pro. I setup another HP Elitebook (same Model) with Windows…

Hi, I'd just like to document how we did it: Sophos UTM SG 230 running latest firmware: SSL VPN configured, multiple connections allowed, compression disabled Each device got a new local user account on the UTM with their machine name, e.g…

Recently, we have put a RADIUS Server within our environment and rolled out OKTA as our MFA platform for VPN. I know the expected behavior is for any user that has OTP/MFA enabled to disconnect the VPN after 8 hours. But we have noticed, after the…

Good Afternoon Everyone, Setup: Sophos Firewall - SG115 Old Servers - MS Windows Server 2008R2 / PowerEdge R710 Active Servers - MS Windows Server 2019 - PowerEdge R440 User - Dell Latitude 5580 Situation: We recently did a server migration…

What, exactly, is this? I'm the user who wants to access our small company's network. I want to access the VPN from multiple locations, and my IP addresses are issued by ExpressVPN. So, say, I might be in a Starbucks in Miami trying to access our development…

Right now the users can simultaneously access their local network as well as the vpn network. Could someone help me to configure ssl-vpn in such a way that when a user is connected to vpn network the local network must be disabled and all the traffic…

I'm using the Sophos SSL VPN Client to connect to my work computer from home, but I also want to make some large downloads on my home internet connection. I'm aware that the way to do this is via Split Tunneling, but I've been unable to find any clear…

Hi all, I am having issues with OpenVPN Connect after updating OpenVPN to 1.2.6. It will connect then drop out randomly, but still appear to be connected once dropped out. When you turn the VPN off and back on it works until it drops out again…

Hi, I was asked to configure Sophos UTM for VPN usage with OTP and IPAD . Someone successfull with this Task? Which VPN-type is usable? I need some hints how to accomplish this.

Howdy :) I'm a recent convert from PFSense. I now use Sophos UTM 9 (9.506-2) on the same hardware (Supermicro A1SAi-2750F - so an Atom C2750 SoC) I have a 100/100 Mbps Internet link. Everything works very good, as expected. Everything except Remote access…

Currently running UTM 9.501-5. Running into an issue with accessing the User Portal and then downloading the utility to install and launch the Remote Access VPN IPSEC pool. Worked wonderfully in the past, but I have not used it in many months because…

Hello, I was wondering, is there a way to restrict bandwidth usage on a user to user basis with SSL VPN users? I already have a QoS rule in place limiting each user to 2m down, but I want some users to have a little more or a little less. Is this…

Hi Guys, Just joined this community and this group. So be patient for this noob here. :) I am currently doing a project which expects users to be able to remote access their VOIP system when they are out of office. And this can be achieved supposed…

Hello, I try to use VPN on iOS devices, but I´m facing serious problems since OpenVPN was updated to 1.07 for iOS devices. I cannot establish a connection anymore with the previous versions of OpenVPN and/or Sophos UTM I was able to connect. Log…

Hi all, I am trying to migrate RAS SSL openvpn from an existing setup to sophos UTM 9 and I am struggeling with sophos certificate management. The existing openvpn setup works well and from a certificate point of view looks like the following: rootCA…

Hello @all, I am having problems accessing my internal network through SSL VPN with my Android devices (Sony Xperia Z5 and Z4 Tablet with both Android 6) and the OpenVPN App.. After connecting to the UTM I want to access an internal Website or a…

I migrated my software UTM (9.351-3) to new hardware a couple of days ago. I maintained the same version and imported the exported config from the old hardware. The old hardware had 5 network interfaces but one was unused and not assigned to any purpose…

I was connected via SSL VPN and decided to sniff my traffic to see which encryption protocol was being used. To my dismay I saw that it is SSLv2. This needs to change to at least TLS 1.1. How can this be done? I have UTM 9.401-11.

We have been using Sophos UTM 9.3 for well over a year now, a pair of SG210 in an active/passive standby. We have been using the SSL VPN for remote access on our user's machines. This has been working fine until recently for a few users, which are now…

How can I verify if all addresses are available? How can I reset this Virtual IP Pool? The usage graph also show that it reaches a 30 concurrent user ceiling.

While setting up the SSL VPN I was able to make a few configurations on my test remote client with multiple working VPN connections to the Sophos UTM all using the SSL VPN. But when I clean up and setup, how I would like, I found out that the user portal…