Welcome to my nightmare. On-site UTM, remote office SonicWall. Before turning on VPN for the entire remote network, I tried to set up just a single host on the same LAN which navigates IPSec phase 1&2 successfully. The connection is up, but no traffic…

Hello, I have yet the configuration, that all my Internet Traffic is routed through VPN Router in DMZ. I have the following configuration: Interfaces LAN (Internal Network): 192.168.0.0 /24 DMZ (VPN Service) : 10.0.0..0 /8 WAN: 84.x.x.x …

Hi all, I want to know how does the Sophos UTM take priority on network routing. Take the snapshot below as an example. This routing table is taken from the Sophos UTM at Support > advanced > Routing Table default via <ISP gateway> dev eth1 table…

Sophos UTM Configuration Interfaces External (WAN) 82.x.x.x DMZ 10.0.0.1 /8 Internal (LAN) 192.168.0.1 /24 Network Services - DNS - Global - Allowed Networks DMZ Network LAN Network Forwarders - DNS Forwarders Google DNS…

Hello Friends, I am a new to Sophose, i have sophose UTM9 is installed & company employees are able connect through the Sophose SSL VPN client to Office resource. Am able to ping to SSL VPN client machine & client machine is able to ping my machine…

Hello, as I already realized ist with SSL VPN, I like to send all client traffic via IPSec over the UTM. Does anyone have a sample configuration? Thanks

Hi, sorry, newbie question alert. Set-up UTM 9.502-4 running on "small" PC brick with 3 NICs (Eth0 is hardwired, Eth1 and 2 are USB <> Ethernet dongles) Eth0 (Management NIC) has 192.168.10.250 Eth1 (ISP interface) Eth2 (LAN interface) has…

Hi, I have SG125 currently with one Internet and one LAN network (192.168.5.x). I want to add an extra Internet link to the UTM and use this link for a different LAN (192.168.10.x) which has only camera connected to. The setup I want to do is -…

I have got 2 sites connected via L2 Point to Point. Site A which the SIP Server, and other VOIP Call server resources are located Site B which all the IP Phones and Clients are located i am unable to do static routing on the bridge interface. The…

Hi there, i've got a Problem with Routing via SG and RED Devices. 1) Sophos SG with local IP 192.168.1.0/24 and 2 Site2Site Connections to 192.168.175.0/24 and 192.168.176.0/24. 2) RED Device in my HomeOffice with 10.x.x.x Pool Where i've to…

Hello Guys, here is a quick and dirty illustration of the current setup: The hosts sit all in de same internal subnet 192.168.150.0/24 and the remote offices all have there unique subnets. Till now. A new customer have the same Subnet as an already…

Hey Guys, I have two UTM's running 9.414-2 connected with a S2S IPSEC tunnel, I'd like to be able to route traffic from site {B} to Gateway [2] is this possible? (I do not have access to gateway [2]* it will only allow traffic from the 192.168.1.0…

Thread title pretty much sums it up. On firmware version 9.500-9 ospfd crashes after logging 'scheduling new router-LSA origination' selfmon.log says 2017:05:23-13:10:53 xxx selfmonng[4623]: I check Failed increment ospf6d_running counter 1 -…

I setup a DMZ on a separate physical interface on a SG330; however, I can still ping hosts on all our internal networks. The only way for me to get this to stop is to disable both "Global ICMP Settings" and "Traceroute Settings" under the Network Protection…

Ok I've been working with IPv6 on the UTM.... It now passes all of the tests, but it shows my UTM external WAN address as my IPv6 address when I go to test-ipv6.com or ipv6-test.com -- it doesn't show my computer's address. On my computer, it shows…

Hi, we got an Interface (VLAN 253 / 10.0.253.10) and a few server in this VLAN, e.g. 10.0.253.11. The default gateway of all Servers in VLAN 253 are set to 10.0.253.10 and for testing i created these firewall rules : any-any-253 & 253-any-any The IP from…

I have added a second local network to my Sophos UTM 9, and the related firewall rules to allow traffic between them. However, despite NOT having a masquerading rule, whenever I access sites between the two networks, the IP of the Sophos router is used…

I have the following Network topology WAN -> eth1 Internal -> eth0 (default VLAN untagged) 10.10.10.0/24 Internal2 -> eth2 (VLAN 10 untagged) 10.10.20.0/24 On the switch, I simply have dedicated untagged ports for VLANs for the respective networks…

Hi guys. I'm having a big Dell severs, ruining Sophos UTM 9 Software. Until now, I was using Cisco 2921 as Router, in front my UTM. I have 200 MB syn. Wan Ethernet line, and need to increase it to 300 or 400Mb, which mean i have to buy another bigger…

Hallo zusammen, ich habe an meiner UTM zwei Netze anliegen die IP Adresstechnisch getrennt sind. ETH1 Internal Network 192.168.0.0 /24 ETH0 Server Netzwerk 192.168.99.0/24 Über die QNAP habe ich die Möglichkeit einen iTunes Server zu konfigurieren…

Hello, i'm having an issue with static routes, and i'm pretty sure this broke somewhere around 9.409/410 as it was working before. i have two gateways in my network, one is the UTM (10.10.10.15) another a cisco ASA(10.10.10.16). Some IPs/network…

I've tried to do this by myself for a couple of days now and I think I have reach the point where I have to ask for help! :-) I have a single server that need to access the internet using to differents gateways based on which protocol is used. My…

Hello. Anybody here using OSPF and Equal Cost MulitPath for load balancing? We have 2 sites, with UTM's in HA, and Dual Cisco routers, connected to 2 MetroE Fiber connections, Se Picture Default, the OSPF routes have, equal costs and will, loadbalance…

I currently have a UTM setup with three different interfaces (WAN, LAN, and DMZ). The LAN and DMZ interfaces have DHCP servers setup with different subnets. The UTM is connected to a trunked port on a managed switch, which is also connected to a wireless…

I recently have setup Sophos Home UTM 9 and I currently having trouble port forwarding my CCTV System, so I can remotely access. however when I create a rule it doesn't seem to work. I have checked the firewalls live log, and the CCTV System doesn't…