My RED 50 is suddenly no longer making a connection. I can see on the modem that it is fetching an DHCP IP address, but the message "Network error" appears on the display. I tried to reflash the RED, but unfortunately it doesn't work either. ******…

Hello everybody, I have several sophos devices (ASG Software, SG125, SG210,SG115), which administers red sophos and access points. I would like to update these UTMs and I would like to have some information on the procedure to follow. HA is being…

Hallo zusammen, ich möchte eine RED an einer Aussenstelle tauschen, bin mir aber unsicher ob mein Vorhaben so funktioniert. Die RED an der Aussenstelle hat aktuell eine statische IP Adresse eingetragen (DHCP wohl nicht möglich, Internetleitung etc…

Hi, I'm digging through our logfiles and daily report and noticed, that our unified REDs affect much blocked traffic by using NTP-Servers in the Internet. Found this in manuals: "If you deploy a RED device manually, you have to ensure that Sophos…

Problem: slow connection between central office and Site B. We have a central office with 100 Mbit/s and 25 Mbit/s up, similar our Site B has 100 down and 25 up. Now in the Central office lies a SG230 with the 9.713-19 Firmware, connecting to the…

Hello, I want to use my NAS behind a RED15w from both my local LAN and also from remote LAN. Remote LAN: 192.168.1.0/24 Local LAN: 192.168.4.0/24 The NAS should be available to both networks for storage and as a media-server. I tried transparent…

Problem: SD RED 20 mit Wifi/WLAN Modul: Wifi AP deaktiviert sich selbst Wireless Protection -> Access Points -> Inactive Access Points Grund: Zugehöriger DHCP-Server ist konfiguriert auf „Clients with static mappings only“ (Network Services…

Hi folks, just curios because there is nothing mention in the realese notes for 9.712: There were new releases for APX firmware ( https://community.sophos.com/sophoswireless/b/blog/posts/release-note-for-apx120-update-ap-fw-11-0-020 ) and for RED firmware…

Hi, I have 2 UTM and one RED-SD20. The SD20 is working fine with 3 VLANs routed. (br0 with eth8, VLAN1, 2, 3 are set up on eth8) Now I want to setup a second RED-tunnel, but between 2 UTMs. Config for VLAN3, which should work on both RED-tunnels…

I know that you can repurpose the various SG and XG firewall appliances for all kinds of uses. You can run Sophos UTM (of course), boot Linux or UNIX and make it into a server, or even install a different firewall on it (e.g., Pfsense). ... but I digress…

Hello all, Your friendly neighbourhood networking newb here. I'm attempting to avoid going through another 18 hours of no internet at head office (yay for nation wide outages) knocking out the other remote offices. I know that REDs can't fail over to…

Hello all, I looked under Logging & Reporting, along with RED Management, and I can't find a count of data usage. Ultimately, I'm looking for how much data our remote sites with REDs are using, as they're configured for Standard/Unified.

Hi, I want to use a SD-RED20 behind an UTM with UTM 9.711-5 to connect a small office to headquarter. The connection from the SD-RED20 is established and working fine, for the local networks (few VLANs, split with a aruba, because the SD-20 can…

Hi guys, yesterday I installed a nice system consisting of a SG210 and 6 outdoor sites with RED60 at a customer. So far everything is great and I am very satisfied. For reasons of web filtering / IDS / antivirus / firewalling, etc., the REDs run according…

Hallo zusammen, ich nutze schon lange die UTM SG. Ich habe nun aktuell zum testen eine RED SD20 angebunden, das hat soweit auch alles gut funktioniert. Verbindung steht. Allerdings habe ich wohl ein Verständnissproblem. Ich habe nun extra den Standardmodus…

Hallo, ich habe ein Problem. Ich möchte über einen Site-to-Site RED-Tunnel VLANs übertragen. Der Aufbau sieht so aus, auf jeder Seite befindet sich eine SG210 mit UTM 9.709. Seite A ist der RED Firewall Server, Seite B ist RED Client. VLAN 1…

Hello, I try to setup a brand new SD-RED-60 but facing endless error leds loop. On local site (192.168.1.0/24), Sophos SG125 configuration : On distant site (192.168.0.0/24), the RED-60 boots the following sequence : - System led blinking green…

Hi Guys i am looking for some guidance. i have a UTM SG310 with 7 RED 15's linked all working fine, The internet provider has told me that i need to change the public/static IP address of the site as soon as due to an upgrade. my Question is do…

Hallo zusammen, ich habe nun schon einige Zeit im Internet recherchiert, leider keine passende Lösung/Erklärung für mein Problem gefunden. Nun hoffe ich durch meinen Beitrag von Eurem Schwarmwissen zu profitieren Wir haben folgende Anforderung…

Hello all, Am I missing something simple, as no matter which of the 5 REDs we have, any client behind them can't connect to the FTP server (port 21) on the main subnet. I've tried several FTP programs (currently favouring WINscp) and they all "time…

Hello I want to know if it is possible to publish 3 ports (8000,3000,3001) of a server connected to a RED50 in standard/split mode. Currently it is working configuring the RED50 in standard/unified mode, but as all the traffic goes through the UTM Firewall…

Hello all, Presently we have 5 small remote offices running REDs on Standard/Unified configs, so that everything is filtered via the UTM here at HQ. At HQ we have a PBX with approx 35 VOIP phones on it and is capable of handling another 50, easily.…

Hello all, As the UTM 9.705-7 we are using was setup by an MSP and at that time we had Exchange 2010, on premise as well. We've since moved to Exchange online and I handle all the Sophos items now. Lately we have random users receiving the following…

Is there a comparison between Sophos RED, Cisco Meraki and Fortinet Fortigate? Pros and cons, for example.

Hi Community, we have a UTM that has 35 red tunnels connected (configuration: all split tunnel) , each red has 10-20 clients to handle, most of them connected simultaneously. Since a few days the tunnels are randomly dropping packages, they don't even…