IPv6 and DNS without additional DHCP and DNS Server
Hello,
I'm running Sophos UTM 9.503-4 on a pcengines APU board behind a FRITZ!Box Fon WLAN 7360. The UTM is configured as exposed host on the Fritz!Box and the UTM provides DHCP and DNS for my LAN. There are no other DHCP or DNS servers and I don't…
IPv4 and IPv6 licensing
Hi there!
I am using Sophos Home UTM for a while, but i have one question.. normally i had no trouble with licensing, but since i also give IPv6 addresses, i'm running out of the 50IP free home license usage... sometimes a client connect with IPv4,…
IPv6 (Zustandsloser Server) wie zuordnen?
Hallo an alle,
ich habe gerade mal eine Frage, die sich aus einer Gegebenheit gerade ergeben hat. Ich habe meine Präfixe als "Zustandslos" bekannt gemacht, was ja an sich den DHCP umgeht und die IPs von den Clients errechnet werden. Das funktioniert…
IPv6, Webfiltering and Netflix
There appears to be an issue with IPv6 and Netflow where on any device, the thumbnails refuse to load, this is the scenario: -
1. IPv4 only and web-filter - All netfilx images load as they should, starting a program works instantly.
2. IPv4, IPv6…
IPv6 not recognized in web interface
Hi
I can see an IPv6 added, and the default gateway has been set dynamically. I can ping6 to the internet from SSH.
However, the UI does not recognize the address, and I cannot do anything on the Prefix advertisement page (it complains about the interface…
IPv6 Setup -- fe80 gateway assignment and NAT?
Ok I've been working with IPv6 on the UTM.... It now passes all of the tests, but it shows my UTM external WAN address as my IPv6 address when I go to test-ipv6.com or ipv6-test.com -- it doesn't show my computer's address.
On my computer, it shows…
NTP errors after enabling IPv6
Getting tons of the syslog info warnings after enabling IPv6.. Sophos UTM 9 bug?
2017:01:16-13:39:36 fwhostname-1 ntpd[27946]: unable to create socket on eth4 (2175) for 2001::1#123 <-----IPv6 address redacted.
2017:01:16-13:45:04 fwhostname-1 ntpd…
[INFO-142] OSPF daemon (ospfd) not running - restarted
I get this fun little notification about once an hour since turning IPv6 on.. As far as I can tell the UTM 9 doesn't even support OSPFv3 (IPv6 version of OSPF), wonder why turning IPv6 support on while OSPFv2 was running would break it.. Hmm...
[INFO…
My Sophos UTM 9 IPv6 epic fail
Hello all. This is a quick and dirty post after spending most the day with a Sophos UTM 9 attempting to get IPv6 working. I am beginning to think my approach may be misinformed. My goal is to have two different IPv6 networks, one private that never changes…
IPv6 Router Advertisement seems to fail
Hello
I have a strange issue with my UTM. For now reason it seems like the Sophos stops broadcasting it's router role for IPv6. It simply stops routing IPv6 Prefix and even with a static assignment it is not routing any IPv6 Traffic anymore.
However…
IPv6 Accept Router Advertisements only for Gateway but no delegated prefix
Hi,
at moment, we got the UTM 9.355 and want to use IPv6. We receive Router Advertisements like this one below and i need some help understand them. As far as our Carrier told us, we have to manually set the WAN-side IPv6 for our WAN-Interface (which…
UTM vor Fritzbox Voip
Hallo zusammen,
ich habe ein Problem beim Einrichten der Fritzbox hinter der UTM.
Situation:
Glasfaseranschluss - UTM - Fritzbox
DIe Einwahl und die Internetverbindung funkioniert ohne Probleme. Nur das Einrichten der Voip Telefonie macht mir…
DHCPv6 funktioniert über WLAN nicht
Hallo zusammen,
ich habe in unserer UTM 5 DHCP-Server angelegt. 3x IPv6 (Internes LAN, internes WLAN, WLAN-Hotspot) , 2x IPv4 (internes WLAN, WLAN-Hotspot). Die IPv4 funktionieren problemlos. Auch der v6 für das interne LAN. Nur die v6 für die WLANs…
RE: IPv6 in broken state
My IPv6 is also broken. Non-working DHCP configuration on WAN interfaces and no RA to configure clients on internal interfaces.
Broke with 9.404-5 to the best of my reckoning.
IPv6 in broken state
IPv6 has been unuseable latetly. Its not just about the unsupported PD-IA over PPPoE which has not been fixed since i reported it 1 1/2 years ago (several times and in beta), but with the last few updates IPv6 seems to only work in midnight during full…
Update auf 9.404-5 und aktivem IPv6 killt Backend und WAF
Guten Morgen,
gestern meldete meine UTM das ein Update bereit liegt.
Das u2d-desc sah viel versprechend aus.
Installation klappte - neustart system auch alles prima.
So nach 20min wunderte ich mich das mein WebServer per WAF nicht mehr erreichbar…
IPv6 Router Advertisement without Prefix Advertisement
Is it possible to have the UTM just do a router advertisement but not any prefix advertisement?
Of course having multiple IPv6 address on a client is working by design, however, in a very strict Enterprise environment like ours the clients should only…
IPv6 DHCP in an UTM RED-Server/Client network
In order to migrate our internal network to a dual-stack configuration, we would need to provide v6 addresses via DHCP to all remote sites.
Each site is using a Sophos UTM 9.4 gateway, all connected via RED Client/Server channels to our 2 central sites…
Static IPv4 and IPv6 on WAN
Hi,
I recently got IPv6 address from my ISP. They send me 2001:1234:1234:11ff::401/120 as gateway and 2001:1234:1234:11ff::402/120 as my address plus 2001:1234:1234:1112::/64 as subnet for my internal interface.
With that info I did following:
in…
RE: IPv6 on WAN
just a bit buggy ya ;)
it sometimes help to deactivate/reactivate IPv6, do delete the prefixes via shell and restart the watchdog (scorpionking posted that on the old astaro.org board) ->
rm /var/chroot-dhcpc/var/db/*.leases6 /var/mdw/scripts/ipv6_watchdog…
IPv6 Tunnel und Uplink-Ausgleich
Hallo,
ich betreibe eine UTM 9 9.355-1 mit zwei Internet Uplinks. Diese sind gleichzeitig aktiv und gleichen die Last aus. Da meine beiden ISPs keine IPv6 Adressen bereitstellen, wollte ich den Tunnel von he.net (tunnelbroker) verwenden. Der Tunnel…
RE: Help with SSL VPN Mandatory (Full) Tunnel
Okay, Bob was great with his help for that mandatory tunnel VPN. (Thank you, Bob).
But...
I just discovered that my MacBook Pro is still split tunneling through IPv6. :-o
Is there a Sophos UTM solution to force IPv6 through the Sophos UTM, or automatically…
Sophos UTM and IPv6 ICMP packets
As one of the lucky (or unlucky) ones to be on IPv6, I have noticed while the firewall blocks traffic through from the outside world, it doesn't seem to block ICMP packets to local devices.
The firewall itself doesn't respond to ICMP, but if I ping…
IPv6 Setup for Comcast Business Modems with Static IP's
I just figured this out, and wanted to share my step by step on how to get IPv6 to work on the Sophos UTM router:
1- Connect 2 ethernet cables from the Comcast Modem (I'm using a DPC3939B Wireless Gateway), 1 for the static IP routing, and 1 for IPv6…
Affect which IPv6 is used for outgoing mails
Hello all,
I have a problem with the IP address which is used for outgoing mails.
We use the Email Protection with the simple mode proxy and inside our network there is an Exchange server.
We have one WAN interface and no Uplink Balancing or Multipath…