Cricketwireless is a US based wireless carrier who piggyback's on att towers. I have two vpn's set up, one based on openvpn using a 5 digit port #, the other L2TP w/ipsec. No issues connecting to the openvpn server using the phone (or laptop when tethered…

We're having issues being able to connect to our new location's UTM behind our ISP's NAT'd public IP. I was able to get a site-to-site VPN connection working between our New Location and our other location's UTM by setting our other location's UTM to…

Hi all, I am experiencing a very strange behavior with an IPsec tunnel between a customer's site (Checkpoint) and our UTM9: It seems to me that every evening at the same time our customer kills all IPsec connections - somewhat ungracefully. Then…

Hi all, Firstly, I've seen many other posts with similar issues but no real resolution to this reported slow performance between S2S links...but please correct me if there is! My Setup: 1 x Sophos UTM 120 (9.506-2) (200/12mbps) (Virgin Media Modem…

Hello Community, we have a very nice and puzzling issue with our Sophos UTM and SMTP relay to a smarthost over an IPsec tunnel. Problem - short version: Our Exchange server forwards mails to the UTM as smarthost. The UTM forwards the mails to a…

Is there a setting that needs to be turned on? i can't get a client with IPv6 connected to L2TP over IPsec. in the log it says the connection is coming from IP 0.0.0.0 Thanks

I have two Sophos UTM in two different networks. Both UTMs are sitting between external and internal subnet. I want both UTMs to be able to initiate connection. For gateway setting gateway type for both is set to initiate connection and gateway is public…

Hi Guys I'd be appreciate if someone help me with this crazy (yet should be well easy) IPSec Tunnel between two FWs. I followed this dude's vlog, but i got no luck yet.. This is what I see from IPSEC VPN* log from Webadmin portal of UTM9 ... …

I am running Sopohs UTM 9.504-1 and am having trouble connecting my UTM to an AWS VPC. It seems all the 'hard' parts are working. I have used the site-to-site VPN-> Amazon VPC->Setup->Import Via Amazon VPC Configuration tool. I have also set the 'Local…

Hi, this is my first post and i hope you can help me. I'm having this problem in 2 UTM 9. Model: SG230. Firmware: 9.503-4 The thing is that the Strict routing works well for about 2 or 3 days, then for no reason every traffic which its destination…

Hey everyone, I thoroughly followed the guide https://www.sophos.com/en-us/medialibrary/PDFs/documentation/utm90_Remote_Access_Via_L2TP_geng.pdf with my test setup of a SOPHOS UTM 9 essentials firewall edition. I managed to get my client connecting…

Hi all I'm having an issue with IPsec side-to-side VPN tunnels since I had to exchange a vdsl router on one side. The prior router had a IP forwarding function, the new one does only support port forwarding (DMZ function, where all ports are forwarded…

Hello guys I got an strange issue. I needed a long time to complete a configuration between my Sophos UTM9 and my ShrewSoft Client to bring up a tunnel with an X509 certificate. A preshared key is unwanted. Now this is completed with 99%. The problem…

Hi all, I just created a new Site-to-Site-VPN with IPSec and the VPN is UP. If I log into my Firewall and try to ping the private IP on the other party, it works, if I try to do that from my PC it does NOT work... The VPN should use two private…

Hi all, We use Sophos UTM V9 for a lot of things and have always been very pleased with the quality and supported features. In the past, we also used Sophos UTM for a site to site IPSEC-VPN tunnel to a virtual network on Microsoft Azure. Not anymore…

2 SG330s in an ipsec vpn over wan with 1gb fiber connectivity. Aspera p2p running at 300 Mb. Transferring over this p2p connection triggers massive latency over the vpn and results in dropped packets and spikes on other connected interfaces. 53 ms…

Hello, I have an issue related to ipsec. Definitely IPSec was not disconnected, but client which was located in BO can't access the server which was located in HO via IPSEC tunnel. PING reached a destination server correctly when client was not able…

OK, here is the deal. I have UTM 9.5s installed at my main office, and a branch office. The Site 2 Site VPN between the 2 offices is an IPsec VPN. Main office has static IP, branch office is Dynamic. I have all that sorted out and working fine. I can…

Hello, as I already realized ist with SSL VPN, I like to send all client traffic via IPSec over the UTM. Does anyone have a sample configuration? Thanks

Hallo Sophos Community, ich zerbreche gerade mein Hirn an der funktionsweise der Site-to-Site VPN zwischen zwei UTMs. Ich wollte wie in der Anleitung eine Site-to-Site VPN zwischen zwei Standorten herzustellen um zwischen mehreren VMs an unterschiedlichen…

I am having a very strange problem with a 3rd party app communicating through my Sophos if they are coming through an IPsec tunnel. I don't know if this belongs in the IPsec discussion group, the web filtering group, or here because it includes parts…

Currently running UTM 9.501-5. Running into an issue with accessing the User Portal and then downloading the utility to install and launch the Remote Access VPN IPSEC pool. Worked wonderfully in the past, but I have not used it in many months because…

Hi, I'm in the process of connecting our Sophos UTM 9 to an AWS VPN with dynamic routing enabled. As I understand the process, this requires us to enable BGP on the UTM. I'm now facing two problems: I lack any kind of experience with BGP and how…

Hello Guys, here is a quick and dirty illustration of the current setup: The hosts sit all in de same internal subnet 192.168.150.0/24 and the remote offices all have there unique subnets. Till now. A new customer have the same Subnet as an already…

Hallo Leute, Könnt ihr mir vlt helfen? Also ich kenne mich mit Sophos gar nicht aus, aber ich habe jetzt Aufgabe gekriegt, dass ich zwischen 2 Firmen eine VPN Verbindung erstellen muss also mithilfe von IPSEC-Tunnel. Ich weiß nur dass ich auf Site…