Hi
I have two VLAN with subnet VLAN1 192.168.123.0/24 and VLAN3 172.20.24.0/26 , and I have my exchange server mail on VLAN3 with @IP 172.20.24.21 (with active directory and DNS ) And I have 1 WAN with @ip Public : 197.97.125.72 GW : 197.97.125.71…
We are setting up an HA pair of XGs, with redundant routers in front of the XGs. I'd like each XG to have a connection to each edge router (clustered). The easiest way to do this would be to configure the routers in failover mode, and use a bridge interface…
Hi All, newbie in Networking. Currently, we have this network setup
We are planning to get an additional ISP exclusive for one of our departments. Is it possible to connect another modem(ISP) to our router and which configurations should I do to…
Hi
We have an on-premise XG230 with LAN, WAN and DMZ interfaces.
On the WAN interface we have a range of IP addresses assigned by our ISP (x.x.x.x 255.255.255.248)
We are then able to use all of the public IP addresses in the range to NAT through…
Hola,tengo un equipo xg210
tengo 2 conexiones WAN una de 120-20 y otra 60-10. Necesito hacer que el trafico de la zona WIFI salga por defecto por el enlace chico y el resto por el enlace mas grande..
Ademas quisieramos poder tener la posibilidad…
my ISP gateway settings have a pool of WAN IP's with CIDR 29 but my ISP gateway is different network
so when i try to add ISP settings it says "IP Interface and Gateway IP must be in the same Network" . because of that i'm not able to register my device…
Hello, I have used the Sophos UTM product for many years now, but I'm interested on testing out Sophos XG as a replacement. I have performed a virtual install of the Sophos XG, but I'm having some trouble setting up the WAN interface on it (virtual NIC…
Hello,
Yesterday I tried moving an XG Firewall Virtual Machine (Hyper-V) from Server 2016 to Server 2019 and I noticed a network performance decrease right away.
I can't tell if the problem is caused by both the LAN and WAN interfaces, but at least…
1. In Administration->Device Access->WAN only SMTP Relay and SSL VPN is enabled. I also tried to enable and disable User Portal from there, but it still shows up. 2. I also tried to enable/disable it in Network->Zones-WAN but it still show up.
It is…
I have a reoccurring problem with one of the WAN connections. I currently have two internet connections, one VDSL and one 4G. The 4G connection is a RUT240 in bridge mode. Every so often the IP is renewed by the ISP but Sophos doesn't pick up on this…
Hello, I have some kind of problem with one of the WAN gateways on the Sophos XG Firewall. The Gateway status is always in red, indicating it is down:
Before going more into detail, I want to present the network diagram to make things easier:
…
Hi Sophos Community.Certain of my clients want to limit amount of data being able to be uploaded out of the network for privacy or data security concerns.We manage the corp wired/wireless side via XG using user accounts with limited upload data available…
Hi,
we have a /28 public subnet. One IP is the default WAN IP, the others are added as Alias to the Interface.
How can I make a rule that every outgoing traffic from a specific host or network is going out over one specific of these alias IPs? …
Im trying to setup failover connections so that in the event of our WAN (P2P) connection fails the sophos auto fails over to our WAN (VPN) connection. the wan P2P connection also has static routes enabled so these would need to failover aswell.
Hi
We have to archive a little bit a special config.
We do have multiple IP on WAN interface, we defined this with alias. As far as good. But now we have to bypass the traffic from one of these ip's direct to another physical port. No Filtering on…
Hi all,
I know there are numerous others stating they're having trouble reconnecting to the WAN after an internet outage, but I thought I'd throw my experience in here too in case it's of any use. Here are the facts:
SFOS 18.0.3 MR-3
Cable modem…
Hi all. I am very new to Sophos XG 125. I need to have atleast 3 VLAN on my network and they need to access internet.
I created the VLAN and assigned a subnet to it
I added the VLAN to br0
I need the VLAN to access to internet, but i cant get the…
Boa noite,
Gostaria de aproveitar e lhe pedir outra ajudar.
O meu XG não está gerenciando corretamente a função wan link manager. Tenho dois links um é backup, só que, quando o link principal cai, o backup entra mais ninguém consegue navegar.
A…
I am trying to put my VOIP system behind our firewall. I would like to separate our data WAN from the VOIP WAN interface. When I did a test configuration the VOIP packets were being sent through both WAN interfaces causing audio issues. What configuration…
Hello,
We have some print and file tranfser issues over IPSEC VPN, print jobs with a pdf file with a image in it which are send from site A to site B over a VPN to the printer get stuck, sometimes it will print but other times it will fail and the…
Hi Everyone,
Are any of you guys/gals having your XG report your external WAN as down or up over and over again ? I have called my ISP to verify everything on their end during the times I got the notifications. They said everything is good and I even…
hello, i have question about an XG firewall .... i have successfully configured an xg firewall on my PC till now i was able to take all my servers via remote at home untill today...i have issue of ssl vpn keep asking the username password continuesly…
Hi everyone!
I have been on a hardware rollercoaster with this product. I recently purchased the XG 330 REV.2 last year. Everything was working fine, I made a few firewall rules and have a couple of VLAN's. but nothing too serious. I scoped out the…
I have setup a link aggregation in active-backup mode on two WAN interfaces of my XG firewall. When primary data connection fails the firewall still sees the gateway up and so it doesn't switch up the backup interface. Is there a way to change the default…