• Sophos site to site VPN changes take long to apply, changes dont apply

    Rog163
    Rog163
    Hi All - ive had this issue for over 2-3 years now - when trying to make changes on site to site vpns - either the changes take long to apply, dont apply or need to apply several times. i try to change local ID for example on an existing site to site…
    • 3 months ago
    • Sophos Firewall
    • Discussions
  • Disconnect after 30600 Seconds, but cannot find this value

    Gerald Werner
    Gerald Werner
    We use Remote acces VPN with our XGS2100 (SFOS 20.0.2 MR-2-Build378) and Sophos Connect client. All VPN Connections disconnect after 30600 seconds oder 8,5 hours. In the Profile we do not have any lifetime or margin set to this value. Phase 1 Key…
    • 3 months ago
    • Sophos Firewall
    • Discussions
  • VPN with Drayteks constant disconnects

    Andrej Pirman
    Andrej Pirman
    Hi, I have a bunch of XGS firewalls in main offices of my customers, which have branch/remote offices with Draytek routers, different models. I have not paid attention till now, when one of those reported intermittent issues with Site2Site IPSec VPN…
    • Answered
    • 3 months ago
    • Sophos Firewall
    • Discussions
  • Probleme mit Sophos XGS IPsec-VPN (iPadOS) und Deutsche Telekom

    Dome96
    Dome96
    Sehr geehrte Community, ich habe ein Problem mit iPadOS und der IPsec-VPN-Verbindung in Zusammenhang mit der Telekom. Beim Versuch, einen VPN-Tunnel von meinem iPad aufzubauen, gelingt dies nur unregelmäßig. Lediglich (geschätzt) 2 von 10 Verbindungsversuchen…
    • 3 months ago
    • Sophos Firewall
    • Discussions
  • No traffic through VPN tunnel

    b_trahn User
    b_trahn User
    Hello, I have a problem with an ipsec Site to Site tunnel. The tunnel is being built, but no traffic is going through the tunnel. The remote station is connected to a router via LTE and a Dyn DNS entry. I checked local and remote subnets. The firewall…
    • Answered
    • 3 months ago
    • Sophos Firewall
    • Discussions
  • NAT between RED20 and IPSec on XGS v20

    Heiko Dammlaks
    Heiko Dammlaks
    Hi I need to translate packets between an ISec and a RED 20. There is an IPSec tunnel with 172.18.10.0/24 on the remote site and 172.26.143.1/24 on the Sophos. I have a RED device with 192.168.54.1/24. I would access form REDs subnets hosts (maybe…
    • 3 months ago
    • Sophos Firewall
    • Discussions
  • Sophos XGS RED 20 WLAN

    Timon Fuchs
    Timon Fuchs
    Hallo, wir implementieren derzeit eine Sophos XGS 3300 und die dazugehörigen RED 20 mit WLAN-Modul und zusätzlichen APX. Wir stellen derzeit erhebliche Perfomance Probleme im Bereich WLAN fest. Folgendes Testszenario: FritzBox mit 5G - > RED 20…
    • 3 months ago
    • Sophos Firewall
    • German Forum
  • NAT over IPSeC Site-to-Site VPN

    Dimitris Roubos
    Dimitris Roubos
    Greetings fellow members, I have 2 networks with 1 sophos firewall each, network A (Public IP/80.80.80.128, Local Network/192.168.20.1/24) and network B (Local Network 192.168.10.1/24). Sophos B XGS107 ( SFOS 19.5.3 MR-3-Build652) Sophos A XG135…
    • Answered
    • 3 months ago
    • Sophos Firewall
    • Discussions
  • Ich kann keine VPN Verbindung aufbauen

    Dominik Koop
    Dominik Koop
    Hallo Zusammen, ich habe das Problem das ich keine VPN Verbindung aufbauen kann. Ich wollte eine VPN Verbindung über SSL VPN aufbauen mit dem OpenVPN client doch das funktioniert nicht. Ich habe die einstellungen so wie hier: https://docs.sophos.com…
    • 3 months ago
    • Sophos Firewall
    • German Forum
  • Cannot use web proxy on port 3128 from SSLVPN

    EdmundSackbauer
    EdmundSackbauer
    Really strange, it used to work and I could use the interal web proxy on port 3128 when connected via SSL-VPN (not "full gateway", only my LAN network is routed via tunnel). Since a couple of months that is not working anymore. Tried checked different…
    • 3 months ago
    • Sophos Firewall
    • Discussions
  • HOW TO CHECK FOR UP TIME IN IPSEC VPN TUNNEL

    eFrancis
    eFrancis
    Hello All, The client has requested to know the uptime in the IPSEC VPN Tunnel. Sophos Model: XGS4500 Thank you
    • Answered
    • 3 months ago
    • Sophos Firewall
    • Discussions
  • No local DNS when connected to SSL VPN

    Joe Schmoe
    Joe Schmoe
    From my Android phone using openvpn and the ovpn config from my Sophos box, I can connect to my network. I can get to my servers from using their IP, but I cannot get hostnames to resolve. In System > Administration I have DNS turned on for VPN 10…
    • 3 months ago
    • Sophos Firewall
    • Discussions
  • Planning RED60 with XGS WAN failover

    anja_m
    anja_m
    Hello together, we have a use case at a customer and want to offer him RED60 and XGS126. This is the planning location outside central office --------------------------------------------------------------------------------------------------------…
    • Answered
    • 3 months ago
    • Sophos Firewall
    • Discussions
  • L2TP freischaltung

    Dennis Braun
    Dennis Braun
    Hey Kollegen, ich habe ein kleines Thema und kann es aktuell nicht lösen und würde eure Hilfe hierfür benötigen. Ich betreibe einen Microsoft Server welcher mir einen L2TP mit PSK bereitstellt. Wenn ich jetzt nun die entsprechenden Ports an der…
    • 3 months ago
    • Sophos Firewall
    • German Forum
  • XGS87 (SFOS 20.0.2 MR-2-Build378) VPN Routing Problem

    Help Me
    Help Me
    Hello, we have a problem which with the routing over VPN. A user is connected to SSL VPN with the XGS. The XGS has a site to site IPsec VPN connection to resources in the cloud. A request from the user's client using SSL VPN for resources in the…
    • Answered
    • 3 months ago
    • Sophos Firewall
    • Discussions
  • Sophos XG und RED mit VLAN verbinden

    ILS Amberg
    ILS Amberg
    Hallo zusammen, Ich möchte folgende Konstellation erreichen: Sophos XG210 in der Hauptstelle und eine RED60 in einer Aussenstelle. Darüber möchte ich 4 Netzwerke verbinden. Port 1 LAN 1 IP 172.16.16.1 VLAN 1010 untaged RED Port 1 Port 4 LAN…
    • 3 months ago
    • Sophos Firewall
    • German Forum
  • IPSEC connection showing this error Couldn't authenticate the local gateway. Check the authentication settings on both devices.

    Anesu Dangarembwa
    Anesu Dangarembwa
    We are trying to setup a IPSEC tunnel between a Sophos Firewall and a ISR4300 After activating its showing error Couldn't authenticate the local gateway. Check the authentication settings on both devices.
    • 3 months ago
    • Sophos Firewall
    • Discussions
  • SAP system not responding when connected on SLL VPN on a Starling network

    Anesu Dangarembwa
    Anesu Dangarembwa
    We have configured an ssl vpn, when we connect with a Starling network the Sophos connect is connecting normally but when we try to use SAP systems it's not responding after logging. The system will be slow to open. However if we connect the vpn with…
    • 3 months ago
    • Sophos Firewall
    • Discussions
  • VPN connection for outsiders

    RealDon1
    RealDon1
    I am trying to get users connected to my vpn, I have follow the ssl vpn setup guide however they are still unable to connect to my address which i had setup the ddns.What else is required to complete the setup, what am i missing? only time i am able to…
    • 3 months ago
    • Sophos Firewall
    • Discussions
  • WIFI "separate zone" didn't work over IPSec

    dirkkotte
    dirkkotte
    Hi all, AP configuration works. I am able to remove & add the AP's. AP's are recognized and shown as active. I can see the traffic between AP & XGS Port 2712. Traffic to port 8472 from firewall to AP is not answered, but i see packets from AP to APIPA…
    • Answered
    • 4 months ago
    • Sophos Firewall
    • Discussions
  • VPN Menu Missing from User Portal

    Tolga Erseker
    Tolga Erseker
    Hi there, I am using a Sophos XG 115 firewall. Yesterday the VPN stopped functioning after I installed the most recent firmware version MR-2-Build378 (20.0.2), and the VPN menu vanished from the user interface. I am able to download the Sophos Connect…
    • Answered
    • 4 months ago
    • Sophos Firewall
    • Discussions
  • Firewall IPsec Site2Site settings page slowdown

    Jens Frankiewicz
    Jens Frankiewicz
    Hi all, when we try to add or change a configuration on the IPsec settings page on our XG/XGS Firewalls we always have to wait for about 2 minutes for the site to load and for it to be usable. The web browser shows the message "This page is slowing…
    • Answered
    • 3 months ago
    • Sophos Firewall
    • Discussions
  • firmware SFVH (SFOS 20.0.2 MR-2-Build378) - RED ISSUE

    Hisham ELMasry
    Hisham ELMasry
    i have a problem with red configuration after new firmware SFVH (SFOS 20.0.2 MR-2-Build378) when i create a new red interface the red server Uplink IP: n/a or the red client Uplink IP: n/a the connection between red server and red client not stab…
    • Answered
    • 4 months ago
    • Sophos Firewall
    • Discussions
  • Disconnection Ipsec with fritz

    Lorena Zandona
    Lorena Zandona
    After update to my xg firewall to v20 ipsec is become unstable. Randomly disconnection. openvpn client work without issue only ipsec have problem Some info: this setup worked for 2 year without a problem (another bug on v19 but fixed). Sophos firewall…
    • Answered
    • 4 months ago
    • Sophos Firewall
    • Discussions
  • VPN global setting not applying changes

    Razif Bahsir
    Razif Bahsir
    Hi, i recently just updated the frimware to the latest 20.0 ver. Problem now i cant save the new ip range in the vpn global setting. As theres and know issue of the range thats need to correct from .5 to .0 after update. Only 2 firewalls seem to be having…
    • Answered
    • 4 months ago
    • Sophos Firewall
    • Discussions
  • View related content from anywhere
  • More
  • Cancel
<>