• Connect two branch office through head office

    Beñat Aramburu1
    Beñat Aramburu1
    Good afternoon, I have a problem to communicate two remote offices to each other through the head office through SSL VPN. From either of the two remote offices, the services available at the head office and from the central office to any of the two…
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • How can I setup a B2B VPN to access resources that use the same IP address scheme as my network?

    AllanD
    AllanD
    So this one has me stumped and its probably just a lack of knowledge issue. We have three XG firewalls across three geographical locations. We are using a 10. addressing scheme with each location being 10.1.*, 10.2.*, and 10.3.*. Cisco routers are used…
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • Is it possible to set up Full Nat rule for an entire subnet?

    Albert Tejada
    Albert Tejada
    I will try to explain this as best as I can with my limited knowledge in networking. This is using XG 210 hardware. We have setup a connectivity from our Azure VNet to our on premises location with a XG 210. In our Azure VNet we have a subnet (ex. 172…
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • InterVLAN Routing

    David Ballagh
    David Ballagh
    I have just setup my XG330 and I plan to use it as my core router so I have assigned .1 for each subnet. My switches do not have any IPs configured except for their management IP which is in VLAN 10. InterVLAN routing seems to be working fine - I can…
    • Answered
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • Use FQDN Host Group in Static Route - Sophos XG

    Networking CAT
    Networking CAT
    Hi, how can i create a static route using a fqdn host group or objects? like in UTM 9 version. use in "destination IP" FQDN hosts (outlook.office365.com) instead of Ip address.
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • How do you get a Mac to communicate over Remote SSL VPN to Windows AD domain?

    DLorien
    DLorien
    Call me frustrated! Over the past two days, I've tried dozens of configurations, fixes, and workarounds to to no avail. PROBLEM: A remote Mac user successfully connects to our Remote SSL VPN but can't join the Windows domain or connect to any local…
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • Cyberoam GRE tunnel

    masanjaibrah
    masanjaibrah
    How can I modify/change/delete the cyberoam gre tunnel by using console? My site is routed by using gre tunnel to headquarter, the ISP change the public ip address of one of site, so how can i change romote-gw in cyberoam console? Need help please
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • UTM 9 seperate Zone to VLAN

    Michael Rombach
    Michael Rombach
    Hallo , Ich habe folgendes Problem wo ich gerade verzweifel: Wir setzen Macmon als automated NAC ein. Wir haben derzeit eine UTM 450 mit 22 angeschlossenen RED15W Filialen. Nun soll die Sophos mit den RED15W und AP55 Wlan bereitstellen, die NAC…
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • Routing aus Domäne ins WAN-Netz

    Sandro Weber
    Sandro Weber
    Hallo zusammen Ich habe folgendes Netzwerk, bei welchem ich ein Problem habe. Und zwar müsste ich von einem Client in der Domäne (10er Netz) an einen Rechner aus dem 3er-Netz kommen. Zugang zum Internet funktioniert. Ich erreiche per Ping das…
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • Static route question

    CaseyJCO
    CaseyJCO
    Hello, I have a setup with 2 networks connected to the XG firewall via a switch: Port 1 is connected to the 10.0.0.x/24 network switch. On that switch is a Sophos UTM with an IP of 10.0.0.6 (it has its own internet connection, etc., 10.150.x.x…
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • Is the XG firewall going to support IS-IS routing protocol anytime soon?

    Fridi Mellemgaard
    Fridi Mellemgaard
    Hi guys I got this question from a customer, and sadly I couldn't answer. Any news on this topic would be helpful :) Best regards Fridi Mellemgaard
    • Answered
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • Routing between interfaces

    Adam Ballew
    Adam Ballew
    Here is the case. I have three interfaces 1. WAN 2. Port 1 as bridge 192.168.2.x 3. Port 3 192.168.3.x I need to configure it to all allow users in port three to access port 1 but port 1 can access port 2
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • Can't ping both ways in XG site-to-site VPN

    Stephen Zuluaga
    Stephen Zuluaga
    I've recently set up a site to site between two XGs using IPSec. Problem On the CLI of site A's XG, I can't ping site B's LAN interface. On the CLI of site B's XG, I can ping site A's LAN interface. Other Facts Local service access for…
    • Answered
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • Vpn config file is 0KB

    Samet Aymaz
    Samet Aymaz
    Hi Friends, We use Sophos Xg with version 17.06. We have a problem in this software. When we downloaded Vpn config file for windows. The size of file is shown as 0KB. Because of this, We cant connect vpn. Verify failed error is shown in vpn logs.…
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • IPSEC - Masquerade/NAT 4 Hosts Behind Peer IP

    NateP
    NateP
    Ok, something that I've easily done many times on all of our UTMs. I have a new IPsec tunnel I built to a 3rd party. We are just accessing a single remote (198.0.0.2/32) host configured in the tunnel, but it needs to be accessed from 4 different hosts…
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • Routing Tabelle auf XG 85w wird nicht aktualisiert ( deutsch / english)

    Vincent Thomas
    Vincent Thomas
    Guten Tag, ich habe einen VPN Tunnel zwischen einer Sophos XG 85 w SFOS 17.0.8 und einer SG 230 hergestellen. Der Tunnel geht online und soweit ist alles gut, nur wird traffic von der XG 85 w Seite nicht in den Tunnel geroutet. Ich habe in der…
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • Routing/Firewalling - two gateways on Head Office LAN segment

    Dale Sayers
    Dale Sayers
    Hi all, I've hunted through the forum but I am unable to find precisely what I am experiencing. I think my issues is related to firewalling. I have a network with two gateways. One is a managed router controlling access to all of our remote sites…
    • Answered
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • Sophos XG Azure Site-to-Site to Point-to-Site routing issue

    Darren Jackson
    Darren Jackson
    Hi everyone! I'm setting up a lab for a customer PoC and I'm having trouble routing from On-Prem connected by IPSEC Site 2 Site Azure VPN to users dialled in via Azure IKEv2 Point 2 Site and vice versa.. Please see below: The on-prem server can…
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • Static routing issue (Devices under same network every few min get network disconnection)

    YB Shin
    YB Shin
    Hi Sophos experts, Now I have two gateways one is for internet other is for IDC as below. Sophos XG (192.168.1.66) Router (192.168.1.52) PC (192.168.1.0/24) Now XG has static routing for IDC as below -IP/Netmask : 192.168.101.0/24 …
    • Answered
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • Access across subnets

    RickyPetite
    RickyPetite
    Goal: Allow persons on the guest network to stream iTunes to Airport Express units connected to the main LAN network. XG firewall with 3 networks: Port1 LAN 192.168.7.1/255.255.255.0 Kids Wifi 172.16.40.1 /255.255.255.0 Guest Wifi 172.16.50…
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • Active sessions don't fail back when primary gateway restored

    Brian Heaton
    Brian Heaton
    Hardware: XG-125 Firmware version: 17.06 ---------------------------- Configuration: - Gateway 1 - Active, weight 1, connected to a low latency terrestrial connection - Gateway 2 - Backup, inherit weight from primary, connected to a satellite…
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • Route LAN Traffic over VPN to break out WAN

    Gideon Joubert
    Gideon Joubert
    Good day all, I have a XG135 at a client site and setup a SSL VPN (Site 2 Site) with our Firewall XG 115. I have successfully setup the SSL VPN and have created the Firewall Rules to see from the client site my Datacentre network. (Backup server…
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • Sophos Anti-virus blocking Cisco VPN Clients

    Juan Carlos Ramos Berrios
    Juan Carlos Ramos Berrios
    Buenos días Quería consultar lo siguiente, tengo un equipo con sophos Endpoint Security and control 10.8. Cuando conecto el equipo por medio de un Wifi y después abro la aplicación del cisco System VPN me manda un error 51 como el adjunto, después de…
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • Cisco router and switch behind a sophos firewall

    Michael Ike Gloria
    Michael Ike Gloria
    Hi Team, I would like to ask something regarding on my setup, I will have this kind of setup ISP>SOPHOS FIREWALL> CISCO ROUTER> CISCO CORE SWITCH> DISTRO SWITCH> ACCESS SWITCH. The router and switches will not be a problem for me on routing them to…
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • redirect multiple https ports to single ip adress Sophos XG sfos17.06

    Rick Hofstede
    Rick Hofstede
    We have got the following situation: we want to redirect multiple dns hosts to a single ip adres. For example: External dns record https://test1.companyname.com redirects to 123.123.123.1 In the firewall i want https://test1.companyname.com redirected…
    • over 6 years ago
    • Sophos Firewall
    • Discussions
  • View related content from anywhere
  • More
  • Cancel
<>