We have a DMZ subnet off of our XG 550. When our internet connection goes down, internal clients cannot get to the web servers located on that DMZ. If you do a tracert, it is attempting to send the traffic out the other internet connection and get to…
Hi Sophos Team,
we are looking for a compatibility guideline for Sophos XG 210 with the cisco SG-350-28 model.
Cisco SG350-28 is 28 port model none-POE switch all ports are 1GiG ethernet copper ports
what we are trying to achieve,
will create…
Hello, i am not able to configure my SSL VPN yet. I tried with my Android with OpenVPN and i get this message =>
exception IPv4 route [route] [remote_host] [255.255.255.355] [net_gateway]:addr_pair_mask_parse_error: addrmaskpair parse error 'route'…
Hi everyone,
I know the question may not be clear but here it is.
I have managed to get connectivity between the branch and HQ. I can ping and access devices on both sides.
The issue is, when VLAN551, which is the data vlan, is on WAN, the cisco…
Hi everyone,
How and where do I enable wildcard blocking? I want to block all the stupid, ",io" TLD's among others.
Something like this; https?://[A-Za-z0-9.-]*\.io/ just not sure where to put it.
Thanks in advance!
Storyline : i replacement my UTM Huawei with Sophos XG230, i have problem with my core switch Huawei that i cant comunicate with them, my laptop can get IP from LAG port and i can ping to sophos xg with no problem but my problem is i cant ping or comunicate…
Greetings,
Sophos XG is not accepting my IPv6 config while all other devices including Windows and Linux Hosts accepts.
i get error "You cannot enter a network IP for Gateway IP" my ISP assigned config as below
IPv6 POOL-2401:0:4000::510/126…
kali.mirror.garr.it/.../kali-linux-2018.3a-amd64.iso I started downloading his file. when I look at the log viewer to download the file, fw_rule_id="2" means downloading the file from the rule I set. that's normal. this rule defines the primary gateway…
Hi All,
Border Gateway Protocol (BGP) is a path vector protocol that contains path information, enabling the routers to share routing information between autonomous systems (AS) so that loop-free routes can be created. This protocol is generally used…
Hi everyone!
I have been on a hardware rollercoaster with this product. I recently purchased the XG 330 REV.2 last year. Everything was working fine, I made a few firewall rules and have a couple of VLAN's. but nothing too serious. I scoped out the…
Hello i just purchased this firewall and have the following setup
I have 3 dhcp scopes:
VLAN_500_SCOPE - 192.168.10.100 - 192.168.10.200
VLAN_600_SCOPE - 192.168.20.100 - 192.168.20.200
WFIF_SCOPE - 192.168.30.100 - 192.168.30.200
…
Hello! I need help. i have very low speed site speedtest.com showed 15mb/s download and 10 mb/s upload. My Provider give me 50mb/s... About my device: Sophos Firmware Version SFOS 17.1.3 MR-3. Install on virtual machine VMware ESXI 6.0.
For info: 1…
hello everyone
hope everyone is doing great
i have lan network behind sophos with range 10.10.10.0 /24
and i have an Exchange Server in this lan with ip for example 10.10.10.5
and i have a real IP available on my WAN line xx.xx.xx.182 /32
iam…
We have a Sophos XG 125 with a flat internal network.
We are trying to setup a connection to a credit card processor with the following instructions:
"We want to narrow down the phase 2 encryption to a /32 host. If we can essentially take whatever…
We're looking to implement HA for the LAN and we're wondering if the XG has the ability to do HA without syncing its configurations because each firewall would have different WAN connection settings. Is this available in XG? (I essentially want it to…
Hi, Good day, i have choosen a device name for my sophos xg firewall (administration>Admin Settings>Host Name: sophos.cedes ) but i can't ping to it, it doesnt work also when i go to https://sophos.cedes:4444 for the admin panel or https://sophos.cedes…
Hi !
I'm quite new to XG Firewall. I've got the following Setup:
XG Softwarebased setup on 2 Lan Card PC
Port 1 LAN with Range from 192.168.1...
Port 2 WAN with Statik IP 192.168.3.... getting it from Router LAN
Router with static IP Adress…
Hallo Community!
Aufgrund einer kürzlichen "Firmenspaltung" wurde ich mit der Aufgabe betraut ein zweites Büro (nennen wir es mal Firma B) einzurichten.
Ich habe mich für eine Sophos XG 210 entschieden, die aktuell Munter auf der Version 17.1.1…
Good afternoon,
I have a problem to communicate two remote offices to each other through the head office through SSL VPN. From either of the two remote offices, the services available at the head office and from the central office to any of the two…
When I initially set up my XG210 I used the default LAN (1Gbps) port. Now, I want to switch to using the 4.25Gbps SFP port for the "LAN" interface. The SFP port is connected my switch and has an IP address assigned. What do I need to change next?
I have an XG210 which has 2 GbE SFP ports built-in. I want to use one of these as my "LAN" interface connected to the switch. I can configure the IP settings for the interface but connecting it to the switch via an SFP cable ( this one ) the interface…
hi sophos,
I'm new to sophos
i know how to set up live wan IP in sohpos XG firewall.
Now from the vendor i purchase leased line he give me a live static IP .
how to mapping that static IP with wan live ip.
I need to start Video conferance. …
I have just setup my XG330 and I plan to use it as my core router so I have assigned .1 for each subnet. My switches do not have any IPs configured except for their management IP which is in VLAN 10. InterVLAN routing seems to be working fine - I can…