Hello, I have 2 existing UTM 9 Firewall in a cluster active/passive and I would like to migrate it to XG with not much rules. Can I get an explanation step by step to what I have to do ?

Hi All, We are in the process of trying to migrate off our old Sophos UTM FW and onto our new XGS firewalls. We have a mid sized organisation running multiple vlans through the UTM. Our idea is to have the XG and SG running in parallel to test vlans and…

Dear Team, I have to migrate from Palo Alto 3020 to Sophos XG430 firewall, do you have a migration tool available for this purposes? Please advise. Regards, Ather Zaidi

Hello, I am currently preparing a XG310 as replacement for our ageing SG310. We have a quite extensive ruleset in the web protection with whitelist for hundreds of websites and seperated configurations for about 10 different LDAP-groups. So I read…

Team, good afternoon I am writing to ask for your opinion regarding the following case: One of our clients has a Fortinet FW with approximately 500 rules, is there a way to make the migration faster without having to register rule by rule? Thanks…

We have received our new XGS 126. And we would like to migrate the configuration from our XG 125 Rev.3 Unfortunately it is not possible to upload the backup from the XG 125 to the XGS 126 because the new one comes with 18.5.0 and for the old one there…

Hello everyone I have a configuration that comes from a Cyberoam that in turn has been converted to SFOS..... during this path the management of web filters with "Internet Scheme" was carried out. After converting web rules... it's time to disable the…

Dear Team I have a cyberom Firewall and currently sophos Replace the Cyberom so please guide me how to i transfer cyberom configure in sophos XG230 Firewall

Hello All. We are a Sophos Partner. So we have (2) SG230's (HA) and about (40) SG115's . In our office we have XG replacements for all these units which will be phased in at specific times. This is a hub and spoke VPN and the plan was to install the…

Hello, and forgive me if I sound a bit annoyed, but I spent the entire night on something that should be a triviality, and it still doesn't work. We have an XG135 rev2 that works just fine, about 15 employees connect to it using RED devices, and we…

Hello, We are upgrading from an XG 105 to XG 135. Main reason is that we have slow down on the web browsing protection and also because we have IPsec and we need much faster bandwidth. From my understanding of what I see on this forum, it is possible…

I recently backed up a configuration from an XG85 running 17.0 and uploaded it to an XG200 series hardware running 18.0.1, Now SSL VPN will not connect. Here are the logs: Client side: Tue Nov 17 20:17:56 2020 OpenVPN 2.3.8 i686-w64-mingw32 [SSL…

We've had a serious problem with the registration of a converted SG 230 There seems to be an error in the registration webpage of converted SG when the original SG license only has the basis license still valid. We had the original license file of…

Hi guys! I am using XG210 firewall and I just wanted to ask if upgrading firmware from SFOS 17.5.14 MR-14-1 to HW-18.0.3_MR-3.SF300-457 is possible? Thank you guys!

Hello guys, I need to migrate an existing Cyberoam Virtual Appliance to Sophos XG Virtual Appliance. I have significant experience migrating physical appliances, but this is the first time having to do that with a virtual appliance. Anyone who already…

Hello everyone, one of our customers tried to migrate his Cyberoam CR15iNG to SFOS and ran into several errors. The installation of SFOS seemed to go smoothly but the machine doesn't seem to have any connectivity to perform the registration with Sophos…

Hi! We are migrating from UTM to XG using the migration tool. We generated the config and imported it into our spare SG. We are now seeing an error when editing the local Service ACL in "Administration -> Device Access". We edited it before, but…

Need a resource who can come to our office in LA, CA and help us migrate Sophos UTM220 Firewall to Sophos XG210. This can be done offhours or on weekends. We are estimating, that it will take around 15-20 hours.

The Sophos Gods are crule here -- despite the same number of interfaces you cannot backup from a 135W (or any W aka WIFI branded Sophos Device) and restore to a XG210 (or any other non WIFI integrated Sophos Device. This being a sick gotcha can be a very…

Good day all, Is it a known issue after migration from cyberoam to SFOS where one cannot access the device through the WAN link, because i have not been able to achieve that. What can i do in this case to have it working? Also i notice that SSO clients…

Hey guys, I have noticed since version MR3 that the migration of my configuration does not work properly. After the SFOS upgrade and its restart, the standard configuration is loaded during the migration process. Now I tried to upgrade to MR-5 yesterday…

During the process of migration from UTM to XG, I am facing the an error during the restoring of backup file, created on XG85 (17.03.MR-3) on SG125 (17.03.MR-3) - "sophos XG backup cannot be restored on current device" I tried with different backup…

Hi Everyone, I'm trying to see if anyone here have experience or best practices to follow when moving from one sophos XG to another device. To give you guys a bit of a background, we have been using a XG310 device which was provided by our service provider…

Hello Guys One of my customers has Cyberoam 500iNG - 300iNG boxes and running 10.6.5 Nr1 firmware -- which Sophos firmware is suitable to upgrade to ?

Hi Folks, Please, let me know. In a Cyberoam to SFOS migration we have Internet Scheme under Web protection. Can I usage it without problem or is it recommended convert it to Firewall Policy thinking in future upgrades, once that Sophos XG devices…