hello. Sorry for my poor English. I was thinking of connecting LAN cables to multiple ports of the XGS136 to create one LAN like a regular router. ex) port1=WAN port2~port10=192.168.10.1~192.168.10.255 Assign default gateway 192.168.10.1 to…

Installed home firewall on XG 125w rev3. The software shows ports 5 and 6 as Port 1 (LAN) and Port 2 (WAN). It seems all of the ports are numbered wrong. Is there any way to configure the software to see the correct port numbers?

Hi, In doc.sophos.com/.../index.html i found that a bridge interface can configure from 2 to 64 interfaces, but i don't find how many bridges can i configure. Does anyone know the limit?

Hi, we have two core switch with single sophos-xgs firewall.only internet traffic coming to firewall all Lan gateway are configure in core-switch.both core are connected with VLT. query ----how to connect two uplink with firewall and what need to…

I have a simcard in WWAN unit but ATT does not seem to know any info on setting it up. Does anyone know what all I need to put in? Thanks.

Hi. Does anyone know if it's possible to exclude configured network interfaces from the coloured interface status icon on the home page of the firewall? Its purpose is to show at a glance of connectivity problems. However, sometimes it is normal for an…

Wan Port Automatic down of sophos xgs 2100 firewall. what is solution.

So, I have Port2 and 4 as WAN interfaces. Port 2 is the main interface with multiple public IP addresses assigned to number of services. Life was going just fine until month ago when one public IP address stop working! You can't ping it from outside the…

We have set a bridge on ports 3 and 4 to plug the Aruba 2930 switches in parralell vs daisy chain, the bridge works as expected except we had an issue with printers. the pritners connected to port 3 work, but the printers on port 4 stop connecting, has…

Hello Everyone, I hope this message finds you well. I would like to understand if there is a method available to assess the internet speed of various ISPs configured on separate WAN ports within the Sophos Firewall. Additionally, It is possible to…

I'm trying to send a ping to an external address using a specific interface; the documentation is not clear to me and every attempt tried throws me a "% Error: Unknown Parameter" ping -a <sourceip> <destinationip> % Error: Unknown Parameter

Hallo, unsere örtlichen Stadtwerke haben Glasfaser mit Fibre to the Build verlegt und innerhalb des Gebäudes mit VDSL an die Mietern verteilt. Der Anbieter benötigt keine Zugangsdaten bei der PPOE Einwahl aber in der XGS 107 mit einem Draytek 130 Modem…

Hi, Is there anyway to tell if a Flexi Module is installed besides looking at it physically ?

Hi All, Working on XG115. Had a complaint that VPN not working for one user, no connect. On investigation i discovered that an old WAN private IP that was changed to public is showing up in tracert to workstations/servers from those who can connect…

We are adding Verizon boxes for failover port 3 static ip from ISP port2 Verizon DHCP, when I tested the failover today, the internet remained at the site, but i was not able to manage it from there portal. Has anyone else had experience with this?

Hi all, I am trying to change from SG210 to XGS2100. In the SG210 there is a section "interfaces > Additional Addresses", that lists each of our IP addresses from the WAN block. As I have some other devices, I am able to turn the interface off for…

From time to time, disabling an interface would be very useful in troubleshooting an issue. Why is there no ability to disable an interface. I've had calls with SOPHOS Engineers who also wished this would be possible for troubleshooting. Engineers at…

Hi everyone So the performance and interface symbols in my control center are red. The interface when i click on it shows the gateway ip as red. I have attached a photo. The performance was orange and now it is red. Can someone please help…

Hello, we are trying to get the Sophos Firewall (19.5-MR3) up and running in a public datacenter and to do this we need to change the assignment of zones to interfaces and statically configure the public IP address for the WAN interface. Since the admin…

I would like to see an easy way to move vlans to another port. This will help in moving a heavily used port from one port to another without having to delete the vlan and DHCP scope and recreate it. This would speed up moving vlans across ports. …

Hi all, I rarely work with Sophos Firewalls and haven't ever had to do much on them before, but having recently logged in to one I found that on the 'Control Centre' page that 'Interfaces' is highlighted orange. When I then select 'Interfaces' it…

Recently I have added multiple WAN interfaces to our XGS's. I just noticed that when I attempt to manage polices for this Group of XGS, that it just SPINS and I cannot access the group policy management. I can manage each member of the group from central…

So i'm a bit confused and could use some help. After running NMAP on my public IP for a sanity check i was greeted with ports showing open that shouldn't be available to the WAN port. I don't have any services checked on my local service ACL for WAN Starting…

LAN port 1 and the rest of the other 7 ports on xg135 not working. After turning the device on the interface ports only flicks green and yellow lights at first then go off. I have tried the following: 1. Hard reset on the device 2. Factory reset…

Ich habe eine XG (Virtual Appliance) im Home Office laufen. Mein Internetanbieter ist von Magenta über Kabel mit 500/50. Wenn ich mit der PS5 ein Update eines Spieles oder der Systemsoftware mache, geht das externe Interface auf offline, bis ich das…