• Saturated Bandwidth Sophos XG

    David Moro
    David Moro
    Hi guys, 1 of my customers has a brand new XGS2100 with v19.... when i try to take a speedtest from a pc... all the other pcs goes offline... even my teamviewer goes off... and when the pc finish the speedtest all bacame back online... Even if i…
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • XG Can't ping ISP gateway but users can

    Nathan Johnson
    Nathan Johnson
    We have an XG 310 that has two separate internet connections to the same ISP for redundancy and load balancing. Obviously, these two connections are set up on their own WAN ports on the XG, each with a different static IP (and each port has a different…
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • PPoE Wan connection drops over and over

    oner sezgin
    oner sezgin
    We are using xg115w v19 Wan connection drops and connect again around every 20-30 minutes and Why I can not save override mss section? thanks
    • Answered
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • installing SW-18.5.2 on XG 125

    mayberts
    mayberts
    Hi All I recently picked up an XG125 as I wanted to install XG home on it, which I have done, but port one (lan) and port two (wan) have no activity and I am unable to connect to the device via https://<IPADDRESS>:4444 Has any had any success with…
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • internet access

    Mark Brown5
    Mark Brown5
    Thank you for what seems an excellent product. I am a newcomer to firewalls (I briefly used the KYZO "Pizzabox" some 10 years ago, but nothing since), and am trying to understand how best to set it up. So far I have it working with the WAN port connected…
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • Interface speed autonegotation getting downsized

    lki
    lki
    Hi * I have a software based Sophos Firewal with 4 Interfaces. This month I changed from DSL to Fibre which allows me to speed up my browsing ;-) Changing WAN connection was not a big deal, but my interface - lying on Port2 - has some trouble by properly…
    • Answered
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • Need help configuring the WAN interface

    Abhiraj Wagle
    Abhiraj Wagle
    I am very new to the sophas and I only have some months of experience in setting simple Network . I have experience in configuring the sophas network with two ISP(currently Worldlink and Subisu ) where I set one ISP in port 1 and another ISP in port…
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • Control Center Dashboard

    Marco Camacho2
    Marco Camacho2
    Have a weird issue Port2 (WAN) is up and connected via PPPOE but status shows red as in down. I have rebooted twice already and still shows RED. There is internet. Any ideas?
    • Answered
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • Problem with PPPoE connection

    Skowyrnie
    Skowyrnie
    Hello everyone, I have been trying to set up a PPPoE connection for several days. Unfortunately, the connection is not established despite all the correct settings. I enter login and password, set VDSL for my internet operator, set MTU according to…
    • Answered
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • XG 2. WAN failure kills outgoing network

    DAENG
    DAENG
    Hello, I have 2 WAN port as long both are working everthing is ok. But as soon my 2. Fritzbox is dead (Cable Fritzbox fails like once a year, but thats another story) there is no regular outgoing network anymore. In WAN Manager both are ok, in the…
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • Interface naming issue

    Doug Scudder1
    Doug Scudder1
    We purchased two XG750 to run in HA-Active-Passive config. Each is identically equipped with 4 SPF+ ports and 2 QSFP ports. On the Primary XG the SFP+ ports are named PortC1-PortC4, left to right, but on the Auxillary XG the SFP+ ports are name eth0-eth3…
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • Sophos XG HA PPPoE slow reconnect

    Svigelj Levi1
    Svigelj Levi1
    Hello! I have 2 PPPoE WAN connection to each other Sophos appliances If i switch to the passive device manually or if one of the monitored interfaces goes down the pppoe reconnect time is so long, maybe this caused by the ISP modems? I am interested in…
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • Sanity Check: Cabling dual ISPs

    Vlad Bekker
    Vlad Bekker
    Sanity Check: Cabling dual ISPs into separate VLANs and then plugging each one into the Sophos WAN port. Hey All, How are you doing? I wanted to reach out and ask my fellow network engineers at Sophos for a sanity check on my setup. I have a cluster…
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • Server on Different Interface not Reachable from LAN

    Hermann
    Hermann
    I have a server on interface A with its own zone and a static IPv4. It is not reachable from the LAN zone on interface B, even though I have a firewall rule with logging on top of any other rule that says allow from LAN, Any host to Server_Zone, Any host…
    • Answered
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • Configure and Test Best Practice

    JeffCooper
    JeffCooper
    Hi, (First, apologies. If this question makes more sense in the UTM forums I'll start there, but I imagine doing it wrong would cause problems with my XGS too before I even get started.) After many years, and some trepidation, I'm moving from a UTM…
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • Sophos XG v18.5.1 - Disable an Interface

    larray
    larray
    I read in several forum posts that the ability to disable and enable an interface was slated for a v18 feature set, but I do not see it - so I suspect it was not implemented? That would be a pretty big step back to still be missing after 4 years of planned…
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • Help with dual WAN config and second router

    Alexander Heidl
    Alexander Heidl
    Dear community- I have a scenario I would like to achieve with XG330 and a Synology router. Background story: We have a small office setup with a Synology router, that handles our WAN, LAN, Wifi and VPN (IPSec to GCP as well as L2TP for road warriors…
    • Answered
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • Sophos XG Home: Select interfaces or allow > 5 ?

    scoobydooxp
    scoobydooxp
    The server I have in my lab has 4x10G SFP+ and 4x1gbit ethernet built into the board. Sophos is detecting the 4xSFP+ and only 1x1gbit. Is there anyway to force Sophos to see all 8 or have it ignore the 4x10G SFP+? It looks like Linux under the hood but…
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • Traffic between two interfaces (LAN to LAN) only works one way.

    newbie_IT
    newbie_IT
    Hello everyone, I am trying to connect two LAN's that I setup on two separate interfaces (Port 1 and Port 5). I also created a new zone for the LAN on port 5 called TEST_LAN. Here are my rules. RULE 1: LAN to TEST LAN Source Zone: LAN …
    • Answered
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • XG configuration with Optimum and Arris TG1672G

    Krufka
    Krufka
    Hi Can someone help set up Arris and XG firewall? I just got cable internet form Optimum but wish to use my own cable modem. It is Arris TG1672G which I am able to configure fine until I plug in coax form cable company and it gets provider's config…
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • XG Home Edition Issue

    Peter Gilvarry
    Peter Gilvarry
    I have a device with 3 ports, Port 1 is 172.16.16.16 and works, hands out IP addresses OK. Subnet is 255.255.255.0 Port 2 is WAN, working OK Port 3 in LAN, tried Static IP, DHCP but it will not hand out IP addresses. Tried adding DHCP, but…
    • Answered
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • Anyone have Starlink working with an XG/XGS?

    Trevor Foley
    Trevor Foley
    There was a previous thread around a year ago where Casey Luchsinger was having issues getting a Starlink device working on an XG. The thread showed no resolution. One of our customers has ordered a Starlink service (to our surprise). Has anyone successfully…
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • Issue with ALIAS ip's op WAN interface

    ReinhartDB
    ReinhartDB
    Hi, We are in a migration traject from barracuda firewalls to a Sophos 2300 A/P cluster. Our cluster is running: SFOS 18.5.2 MR-2-Build380. Yesterday evenening we tried to implement our new firewalls but we have hit a issue where we were not able…
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • Sophos XG "crashing" VDSL modem

    Dingo Jack
    Dingo Jack
    I am not sure how this is possible, but I have issues where the XG firewall causes my FTTN DSL modem to stop responding. Intended Layout (worked for years using VMware workstation edition, recently moved to Hyper-V but think it worked for a while) is…
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • Remove ip address from a physical interface with VLANs

    Tijani
    Tijani
    Hi, I have the WAN port and the LAN port with 2 VLANs on each. Since it is possible from SFOS 18 to have no IP address on physical interfaces with VLANs, I need to get rid of the "dummy" addresses, but : if I uncheck IPV4 configuration on the…
    • Answered
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • View related content from anywhere
  • More
  • Cancel
<>