XG 135 have 8 ports. I use 1 for LAN (port1), WAN1 (port2) and WAN2 (port3) . I have excess 5 ports. LAN has Vlans IDs 20 and 30. Default DHCP is on LAN port. I want to use excess ports as LAN ports, that also get their IP from Default DHCP. How do I…

Disclaimer : This information is provided as-is for the benefit of the Community. Please contact Sophos Professional Services if you require assistance with your specific environment. Table of Contents Overview Import/Export Configurations…

I have never been able to change my Network, Interfaces, Connection, PortA=LAN or PortB=WAN, Interface speed. The Interface speed is set to Auto negotiate and "Grayed out". I am running on a VMware® Workstation 16 Pro, with NICs set to bridged mode…

Hi, I am trying to deploy the following scheme. A sophos xg at site 1 (WAN IP a.b.c.10) and another sophos xg at site 2 (WAN IP a.b.c.11). Both share wan network (a.b.c.x) and have the same defaulf gateway (a.b.c.1). The problem I am having in this…

Hi there, I've been hesitant with moving from SG to XGS. I did dip my toe into the XG pool by setting up one location with an XG Firewall, however the experience was poor. So I'm currently planning a hardware refresh with SG for the next 3 years as…

Hello i want to replace my isp router with Sophos gx but my isp works with 2 vlans on for internet and the other for voip and iptv is it possible to have both vlan in the wan port of the Sophos

Hallo, ich habe auf einer Sophos SG230 die XG v18.5.4 installiert. Ich habe 3 WAN Ports. 2 davon gehen auf den gleichen Router. Ich habe nun an einer der 2 Schnittstelle das Problem, dass nach ca 4 Stunden im WAN Link Manager das Interface als…

hello, I have one ISP I am using which is a dedicated 30/30mbps but the speed connection is really poor so I just want to use another ISP which will give me a 10/10 dedicated internet connection. So what I want to ask is that can I merge both the ISP…

Disclaimer : This information is provided as-is for the benefit of the Community. Please contact Sophos Professional Services if you require assistance with your specific environment. Table of Contents Overview Ethernet MTU. IP MTU A.K…

Hi, I've recently installed a 10Gb SFP+ transceiver into Port F1 of a Sophos XGS 136 appliance. I can't tell if the transceiver has been detected by the appliance as I'm getting no link light by connecting to another device. Is there a way to examine…

Hello all - I am currently using XG3300 Firewalls ( SFOS 18.5.3 MR-3-Build408) in an HA pair as my main gateway/edge devices to the internet in my company. I have 2 users that mostly work in a web based application and I am having a weird problem with…

Hi all. I have a simple home network like internet > modem > SG115 firewall > switch > home LAN. In home LAN there is already a wireless mesh in bridge mode. The SG115 acts as the router and DHCP server. All wired and wireless devices work as they should…

Hi All I am trying to add a second WAN port in Sophos Firewall (XGS126 (SFOS 19.0.0 GA-Build317) but when I add the IP address, net-mask, gateway ip then I press Save and then Update interface - I get this error: "ip address lies within the leased ip…

The failover rule for a WAN link only allows for failover to "any available gateway." What if I want it to fail to a specific gateway, one that is active all the time? I have 3 WAN connections--these are ALL active connections ALL the time. Fios 1000…

We have an Aruba 2930M switch with 2 SFP+ ports as a LACP trunk connected to a Sophos XGS 4300 with 2 SFP+ ports combined as a LAG. We have several VLAN interfaces setup. I am unable to pass any traffic through to the firewall. If I break up the LAG and…

Hi guys There is one thing that caught my attention, What does Received drops mean? Thank you

Hello everyone here i check documents and dont found how to do this. I tried to did Ethernet card test XGS but i found this article https://support.sophos.com/support/s/article/KB-000036345?language=en_US&c__displayLanguage=en_US and saw dont…

I have Ports 2 and Port 4 configured as WAN, both active with weighting of 1. Both are connected to Comcast BUT separate internet connections, one is from my house, one from next door. It appears by Speed Testing that both are passing download traffic…

10GbE Fiber Transceiver Short Range is compatible with Cisco Meraki series or not

Greeting SOPHOS Comunity, I am looking for some help configuring routing on a Sophos XG 135 SFOS 19.0.0 GA-Build317. I don’t work on firewalls often, so I apologize if some terms are incorrect. I did find https://community.sophos.com/utm-firewall…

Hey, I am trying to find a way to send the WOL packet to computers connected to my XGS116. I have a bunch of work stations Intel Nucs on VLAN100 and some servers etc on VLAN200. I want to be able to turn them on remotely via WOL. The issue is, I…

Att fiber the wan interface is a 5gbe to a 10gbe card on my firewall. However it is not negotiating a 5gbe connection; rather only 1gbe. Anyway to enable 5gbe for this connection? 10gbe is available as a manual selection, but not 5gbe. Using an intel…

Hi folks, early this morning my Australian nbn connection failed. When restored the internal networks were not able to access the internet even though the wan status up. The issue being the XG did not request a new a new address. I restarted the nbn…

How can I get more ports on XG 230 if they are full?

Hi - I have a Sophos XG 135 and I have set up two different networks with different Gateway IP addresses. Port 1 uses 192.168.1.1 Port 8 uses 10.150.121.1 Port 2 is the WAN port I would like devices associated with Port 1 to be able to communicate…