• Port 113

    midnightSun
    midnightSun
    Sooo when scanning the system i've noticed 113 is the only port showing as closed / reject. Since the other ports are Drop I've created a rule to drop 113 from all connections but SFOS isn't honoring the rule. Why? Why would they decided to reject only…
    • Answered
    • 9 months ago
    • Sophos Firewall
    • Discussions
  • Ports blocking on LAN zone.

    Alex KABWE
    Alex KABWE
    Hello dear all, I'm connected with one of my clients via LAN, without going to the internet, just a LAN to LAN connection to have access to their server. But the port open to receive SNMP traffic is blocked from time to time, and I no longer receive…
    • Answered
    • 9 months ago
    • Sophos Firewall
    • Discussions
  • XGS126 and Blink Cameras

    Michael Witmer
    Michael Witmer
    Setting up Blink Cameras and the XGS126 is blocking communication with the Blink Servers. Have updated the policy to allow 554, 443 and 80 for the camera's IP Group but still no go. Anyone else got this to work ??
    • Answered
    • 9 months ago
    • Sophos Firewall
    • Discussions
  • XGS116 and Starlink

    Neil Stratton
    Neil Stratton
    Are there any known issues with XGS and Starlink connections? We deployed a Starlink this weekend as a replacement for a traditional satellite service, but found that after a few minutes the connection stops passing traffic, with WAN link manager reporting…
    • Answered
    • 9 months ago
    • Sophos Firewall
    • Discussions
  • Internet stop every day on same time on Sophos XG135

    Tihomir Trifonov
    Tihomir Trifonov
    Hello, we have a problem with our client where we put Sophos XG135 with latest update 20.0.0 on their network, like every day at the same time somewhere around 12:30-1pm and in the evening around 7-8pm, the internet stops but Sophos continues to work…
    • 9 months ago
    • Sophos Firewall
    • Discussions
  • Rule change not applied unless restart.

    midnightSun
    midnightSun
    I'm having to restart this system to get Firewall / NAT rules enforced when changes are applied. This seems to happen with quite a few people in the community. I've found sometimes disabling the firewall rule that feeds a NAT rule loads the additions…
    • Answered
    • 9 months ago
    • Sophos Firewall
    • Discussions
  • I already added the server port and created the rule but I get this error.

    Patricio Gómez
    Patricio Gómez
    • 9 months ago
    • Sophos Firewall
    • Discussions
  • Cannot adopt Unifi WAP using Sophos XGS

    Sheldon Trewin
    Sheldon Trewin
    I have a Unifi USQ Pro 8-port connected to my Sophos XGS116 using an LC duplex fiber cable. No problems! Can adopt Unifi WAPS connected directly to the Sophos switch. All DHCP server info is being passed nicely from the Sophos firewall to the Unifi switch…
    • 9 months ago
    • Sophos Firewall
    • Discussions
  • How to open to internet for airgap sophos xg firewall>

    Si Ta
    Si Ta
    I like to open the internet access on the firewall. My Firewall is set up as airgap device. One laptop is connected to it to access the web console of the firewall. That laptop can access to the internet. Could you advice me how can I configured my…
    • 9 months ago
    • Sophos Firewall
    • Discussions
  • XGS 5500 Showing Invalid traffic "Could not associate packet to any connection"

    Nainesh Kurkure
    Nainesh Kurkure
    I've been facing an invalid traffic issue with an XGS5500 (SFOS 19.5.2 MR-2-Build624) for a few days. the connections of some PCs to a particular domain seem to work but then I start to log errors such as "Invalid traffic". The firewall rule is a simple…
    • 9 months ago
    • Sophos Firewall
    • Discussions
  • Sophos xgs 116

    aaa kkk
    aaa kkk
    Hello, Is it possible to get 10gbit connectivity on xgs 116? Are there any expansion modules for this firewall? Thanks
    • 9 months ago
    • Sophos Firewall
    • Discussions
  • Block Specific WAN IP address to acces all the LAN

    gouellet
    gouellet
    Hello All, Yesterday my Firewall start trigger IPS alerts, 8 in totals. I see a specific WAN IP address in the rapport i want to completely block. I have read couple older disscution but nothing fully help me. I have already do this firewall rule: …
    • 9 months ago
    • Sophos Firewall
    • Discussions
  • Firewall rules are not working

    Alex K
    Alex K
    Good afternoon I have a problem that when I create a policy for firewalls and it is activated, it does not work. My goal is that I want to block access to the Internet, that is, so that when I go to some web page, my access is blocked, so that a message…
    • 9 months ago
    • Sophos Firewall
    • Discussions
  • Independent additional WAN Gateway

    Quallensaft
    Quallensaft
    Hallo @all, at the moment I have 2 WAN gateways (default gateways for all my networks): WAN GW 1 (active) WAN GW 2 (backup, will be active if GW 1 is failing) What is the "right" way to add a third WAN Gateway (independent from the other 2 WAN GW, without…
    • Answered
    • 9 months ago
    • Sophos Firewall
    • Discussions
  • XG125 - Unable to remove physical and virtual interfaces from a bridge

    Comfortably Numb
    Comfortably Numb
    Could do with a little help in recovering both my physical port 5 and virtual interface from a bridge that’s no longer responding to any configuration options. Initially the intension was to bring together DLAN devices over the physical port and those…
    • 9 months ago
    • Sophos Firewall
    • Discussions
  • XG106 und DSL

    Mehmet Yaldiz
    Mehmet Yaldiz
    Ich bekomme Teleko DSL nicht angeschlossen.
    • 10 months ago
    • Sophos Firewall
    • German Forum
  • Issue accessing some website since a few days

    Christian Briere
    Christian Briere
    Hello! Sophos SG310 V2 ISP: Cable: 940/50 I was running V20 GA for a couple of weeks, but I was seeing alot of glitch with online gaming and sometiems website would take a little longer to load. I saw also in the FW alot of Could not associate…
    • 10 months ago
    • Sophos Firewall
    • Discussions
  • OID WAN link manager

    Glenn2050
    Glenn2050
    Hi, Does anybody know what the OID and name is of the XGS WAN link manager is so I can monitor this with SNMP? I'm having trouble finding it in the MIB files.
    • 10 months ago
    • Sophos Firewall
    • Discussions
  • ROUTING TRAFFIC TO A DESTINATION VIA A SPECIFIC WAN INTERFACE [SD-WAN ROUTING]

    Abdurrahman Mubi
    Abdurrahman Mubi
    Hi All, Scenario: XGS 136 firewall with two WAN links [Wan1 and Wan2] Server/URL on the Internet that has a static IP [x.x.x.x] Single LAN for the internal users Requirement: LAN users to use WAN1 for general Internet traffic LAN users…
    • 10 months ago
    • Sophos Firewall
    • Discussions
  • Limit total traffic of each client on open Wi-Fi

    Paco Laura
    Paco Laura
    Hello. We have an open Wi-Fi network that anyone can connect to without authenticating. We want each client who connects to be able to browse at most 1Gb of data per day. (of any type, navigation, online video, etc.) Is it possible to do this? Thank…
    • 10 months ago
    • Sophos Firewall
    • Discussions
  • Sophos XGS 3100 LAN to LAN using NAT

    sbay
    sbay
    Today we want to replace our old UTM with an XGS 3100 cluster. In advance, we had created rules manually. But we were only able to test it today. We have a LAN port 1 (192.168.2.0/24) and a 2nd LAN on port 7 (192.168.201.0/24) When I access 192.168…
    • Answered
    • 10 months ago
    • Sophos Firewall
    • Discussions
  • Multiple gateways issue

    aaa kkk
    aaa kkk
    Hello, I have two different gateways as follows: 1: ISP (pppoe) 2: Wireguard (192.168.1.10) I have a rule that forwards specific destination fqdns/ips via wireguard gateway, nat rule with translated snat as Wireguard (192.168.1.10). Everything…
    • 10 months ago
    • Sophos Firewall
    • Discussions
  • Disabling a Physical Port through a rule - i.e Disabling WAN Physical Port when internet goes down.

    Shree Shyam Accociate
    Shree Shyam Accociate
    I am facing a very unique scenario where I simply want to disable the one ISP which in going in through Physical port in Firewall when that particular ISP goes down, don't want it as backup or primary, just want that port to turn itself off when ISP goes…
    • 10 months ago
    • Sophos Firewall
    • Discussions
  • Sophos XG115 F/W v19.5 : Opening a range of ports

    Chandrashekhar Dahale
    Chandrashekhar Dahale
    I have a Sophos Firewall XG115 with Firmware revision 19.5 I am trying to open ports associated with a LAN Host , using DNAT assistant. There is a range of ports to be opened ports 40,000 to 60,000. I have created a service with ports 1:65535 mapped…
    • 10 months ago
    • Sophos Firewall
    • Discussions
  • port Forwarding not working in sophos XG135

    Shabeer K
    Shabeer K
    Dear Sophos Support Team XG135 sophos firewall port forwarding not working properly on our customer ..he has remote access on IPPBX branch..how can i solve this issue
    • Answered
    • 10 months ago
    • Sophos Firewall
    • Discussions
  • View related content from anywhere
  • More
  • Cancel
<>