• Free XG home Firewall in esxi and can't get to the gui

    Casey Fraysier
    Casey Fraysier
    I have two installs of 18.5.1 and I have the same issue with both. I can't get to the gui. I've changed the nic1 ip to anything in any of my other vlans and I just get can't be reached. Obviously 172.16.16.16 not being in my network won't work so changing…
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • Login to Admin interface fails on first attempt when capture visible

    balletbob
    balletbob
    Hi, This appears to be an 18.5 MR1 issue. When I login to any of our XG appliances externally (don't worry, we're using IP restrictions :) ) and the capture box is on the login screen, the login will fail the first time. The second login attempt…
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • I cannot access my cophos xgs8

    Uche Tee
    Uche Tee
    I have configured my WAN and DMZ but now i can no longer access my sophos box after bridging my port 1 with port 4. Its shows not internet and the LAN 172.16.16.16:4444 cant access the GUI interface, please any suggestions will help. I dont want to resort…
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • Configuring remote XGS 116

    Alan Spark
    Alan Spark
    I am configuring a remote XGS 116 via Sophos Connect at the moment, primarily with the aim of setting up VPN connections. I have configured both IPsec and SSL VPN modes and have successfully connected to IPsec. I can't test SSL yet as I need to login…
    • Answered
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • SSL VPN connected, login web page available, login refused

    Wayne Folta
    Wayne Folta
    I was recently testing remote SSL VPN access and connected successfully from a Mac using OpenVPN. I was able to then go to the admin login web page, and when I entered the login and password -- from a password manager, so no possibility of typo -- it…
    • Answered
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • Disable ping and http/https access to Vlan interface IPs?

    SHtan
    SHtan
    Hi all, Is it possible disable ping and http/https access to VLAN interface IPs? Is this to be performed via FW rules?
    • Answered
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • [Resolved] How to ssh into Core switch from Mgt PC, using XG210 to perform InterVLAN routing

    SHtan
    SHtan
    Hello all, I'm stuck at the following, hope to get the community's help. I have the following network configured. I am trying to ssh into the CORE SWITCH from the MGT PC but to no avail. XG210 is currently configured to perform InterVLAN routing via…
    • Answered
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • Appliance Access and Broadcast

    GabrieleD
    GabrieleD
    Broadcast packet are normal into LAN zones. It's possible to quit messages logs (Appliance Access - Denied) originate from LAN Zones (like TCP port 137 that reach firewall) and keep active message logs (Appliance Access - Denied) originate from WAN…
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • XG 86 REV1 Can't get into appliance anymore.

    MikeGrady
    MikeGrady
    I have an XG86 that was installed quite some time ago. I can no longer log in to the appliance with name and pw that used to work. I was getting alerts to upgrade the OS. It appears I am locked out. Any ideas?
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • How / is the built-in 'Support Access' function protected to ensure no-one but Sophos can access?

    ptho
    ptho
    Hi All, I understand that turning Support Access on allows Sophos to connect in for support-related works etc., but is this functionality secured so that only Sophos can make use of this access by way of only accepting connections from known Sophos…
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • XG115 web gui timeout issue

    Ricky Stiles
    Ricky Stiles
    I received a replacement XG115 device from Sophos (old v2 from 2018) as the old one failed and it seems to have an issue. I restored the backup fine and it seems to pass traffic ok (will know more tomorrow when users are in the office) but the web interface…
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • SSH login to XG with powershell

    Ben@Network
    Ben@Network
    Hello Community, has anybody a working Powershell script to connect to the XG Firewall? I'm testing with POSH-SSH module. If I try to connect to the XG with this command "New-SSHSession -ComputerName firewall" I get after entering my credentials this…
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • Sophos XG Admin Password lost

    AndréAegerter
    AndréAegerter
    Hi all Unfortunately, the link from Ifferara in this post doesn't work here: https://community.sophos.com/sophos-xg-firewall/f/discussions/75632/xg105-admin-password-lost I have the following XG Version: SFVH (SFOS 18.0.5 MR-5-Build586) Is it possible…
    • Answered
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • SSH disabled on WAN port and LAN port but get notification of so many different public IP access to ssh

    Manish Asodariya
    Manish Asodariya
    Hello, We disabled ssh access on WAN port and LAN port, but we get mail notification of many different public IP try to login via ssh.. Below notification which we gets. Message: User 'root' failed to login from '61.177.173.16' using ssh because…
    • Answered
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • HTTP ERROR 404 or 502,403

    byzsml
    byzsml
    Hello we get 404, 403 or 502 errors daily. We need to turn the device off and on continuously for about 40 days in this way. We cannot get support from our seller.
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • Web gui not accessible - Firewall ist starting - Sophos XG - Tomcat Server DEAD can't be restarted

    Dirk Stolle
    Dirk Stolle
    Sohos XG 18.0.5 MR-5-Build 586 Hi, I'm not able to connect to my Sophos XG via web gui and SSH. The web gui states 'Firewall is starting' all the time. SSH states 'remote side unexpectedly closed network connection'. I followed the steps in this…
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • From SSL VPN Client - Unable to Log into Remote Site Sophos Web - Invalid Traffic

    Ben Sanderson
    Ben Sanderson
    From SSL VPN Client at Head Office to a Remote Sophos unable to connect to Web Interface either on 4444 or 443. I am able to SSH to the device with no issues. All of the firewall rules are in place at both ends, have multiple sites that work with…
    • Answered
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • unable to ssh

    Hanumantha Poreddy
    Hanumantha Poreddy
    Hi Am able access the firewall web GUI but not able to access the CLI using SSH and it is showing access denied. Anyone help me on this. Thanks in Advance
    • Answered
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • Nach Restore SSH nicht möglich

    MaWei
    MaWei
    Hallo in die Community nachdem ich eine XG230 aus einem Restore in Betrieb genommen hatte, bin ich nun wieder per WebAdmin fleissig am administrieren. Ich habe aktuell DREI AdminUser mit denen ich in den WebAdmin kommen, User und Kennwort sind also…
    • Answered
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • WAN port respond to admin port only (i.e. 443 and 4444)

    Leo Wong2
    Leo Wong2
    We can only access port 4434 and 4444 from WAN interface. We setup forwarding (i.e. port 81 to internal DVR). Port forwarding doesn't work. Can anyone help, please?
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • password at boot

    Guillaume Roche
    Guillaume Roche
    Hi, I install the HW-18.0.5_MR-5-586 but i have a prompt password at boot. I think it's ok for the first boot, but after restored by utm migrated configuration, il have still the promt for the admin password . I reimage 3 times but it didn't change…
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • I can only access the web GUI from the same subnet.

    Jacob Holman
    Jacob Holman
    Hello All, I am new to Sophos and I am attempting to configure an XG310 to work in Active-Passive as our backup to our primary FW. I went through the initial setup and assigned a static IP to the FW but I can only access the web GUI from the same subnet…
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • XG FW not reachable after install/initial

    Yuri
    Yuri
    Hi guys, Seems i'm lost in config somewhere, i had to reinstall XG Home VM, tried both 18.0.1 and 18.0.5 versions. After finishing setup, firewall is unreachable on wan and lan ports, cant ping anything until i login true console from host and use…
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • sophos xg firewall-do not have either the IP of my firewall or the password admin

    manel Ammar
    manel Ammar
    basically i could not access the web admin or anything else.
    • Answered
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • Delete a DNAt Rule from CLI , accidently forwarded all ports to another machine

    Janam Khatiwada
    Janam Khatiwada
    Hello, i accidently click incoming connection to any while setting up Dnat and now i cant access sophos webportal, how can i delete this DNAT rule , is there any way to delete from cli?
    • Answered
    • over 3 years ago
    • Sophos Firewall
    • Discussions
  • View related content from anywhere
  • More
  • Cancel
<>