• WAN failover configuration

    Sachin Chopade
    Sachin Chopade
    Dear Team, I have 2 Internet link WAN 1 is leased line 200 MBPS 2nd is Broadband its connect against router so 2nd wan DHCP ip is 192.168.X.X and it work . Now i have configured failover active backup now ,i want to configure active active but my…
    • Answered
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • After adding a second WAN link, Internet goes down

    shdan
    shdan
    Hi everybody! Now we have a second WAN link (DHCP) and I‘m following the instructions: https://doc.sophos.com/nsg/sophos-firewall/18.5/Help/en-us/webhelp/onlinehelp/AdministratorHelp/Routing/Gateways/RoutingConfigureGatewayBalancing/index.html …
    • Answered
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • Sophos DSL Module at XGS 2100

    Dennis Wauer
    Dennis Wauer
    Hi there, I have one question related on the DSL Module , we configured everything like it should be - the connection works fine. But we have a small issue, that it shows the interface under Control Panel / System always as down. I remember something…
    • Answered
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • Connecting two Cores

    JSP_1970
    JSP_1970
    In preparation for a Network upgrade (which we are also re-subnetting the entire network) I'd like to connect our new core to our XG 550 on a newly installed 10G port on a separate subnet. The existing is on a 1G 10.10.x.x /24 the new will be on 10.16…
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • WAN interface keeps going down every one / two Hours or so days. It started earlier this week and I can't find a reason why it happens. Once I reboot the router/ Firewal, it comes back up.

    NSC NSC
    NSC NSC
    WAN interface keeps going down every one /two Hours or so days. It started earlier this week and I can't find a reason why it happens. Once I reboot the router, it comes back up.
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • Configure Failover (active and backup wan interfaces) on XGS Firewall V19.5

    Alejandro Hernandez2
    Alejandro Hernandez2
    Hellow I am following this configuration for failover: https://docs.sophos.com/nsg/sophos-firewall/19.0/Help/en-us/webhelp/onlinehelp/AdministratorHelp/Routing/Gateways/RoutingConfigureGatewayBalancing/index.html I want to be sure if there is…
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • Lancom WAN Gateway SSL VPN

    Simplified Sam
    Simplified Sam
    Hallo, wir haben einen Lancom Router von der Telekom (Der aktuell nur als SIP Port für unsere alte Telefonanlage dient), der in unsere Sophos aktuell nur als WAN Gateway Backup mit Failover eingetragen ist. In der Sophos steht er mit 20.251 auf einem…
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • Multiple WAN IP's through Comcast Fiber EDI L3 Block

    Joel Peluchette
    Joel Peluchette
    We are currently being provided a block of 5 static IP's through our Comcast Fiber EDI connection with Comcast providing us (2) ranges of IP's. We get an L3 range and a Usable range. My understanding of this is to allow easier troubleshooting of the Comcast…
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • Sophos XGS 116 loses WAN connection after a few hours of normal operation

    David FM
    David FM
    In our production environment we have replaced our old firewall with a Sophos XGS 116. We have replicated the rules we had in our old firewall and everything seems to be going well: our applications are accessible, we can manage our databases... in short…
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • Routing 2nd Public IP to another router

    Felix Burkhard
    Felix Burkhard
    Hi We have a fibre link from our ISP with a static IP and a secondary / extra range of public IPs. Public IP: 100.100.100.62 (numbers made up) with GW 100.100.100.61 - This is the primary IP we use. We also have a set of secondary public IPs on…
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • Secondary link not working when primary link down

    oriens global
    oriens global
    Dear Mate, I've two links one is a static IP address another is a PPPoE connection, both links are ACTIVE connections, whenever a static IP link is down, the PPPoE connection is not working properly, it's very slow but that pppoe link is 400mbps line…
    • Answered
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • Configuring dual WAN IP with an SSL VPN client

    Karthik P
    Karthik P
    we have to Dual WAN with static IP- refer to below screenshot 118.189.XXX.XX is the primary WAN IP address. 165.21.XX.XX is the secondary WAN IP address. The problem is that SSL VPN is configured with the IP address 118.189.XXX.XX (Primary WAN)…
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • Redundant firewall, different ISP for each?

    imposter_syndrome
    imposter_syndrome
    Hello, I have what is hopefully a simple question. My org wants to set up a remote office with redundant firewalls and ISP's to keep connectivity if one firewall fails or one ISP goes down. A colleague of mine told me that at a previous company, they…
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • Wan monitoring and HA failover

    TingYu
    TingYu
    Hi, I have two nodes with HA going, and on primary node, I disconnect Wan port cable and hope HA will failover to my 2nd node, but it does not. 1. when I disconnect Wan cable, I do see interface on node showing red, meaning it had detected Wan…
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • XG home lic adding a 2nd Wan Line

    TingYu
    TingYu
    Hi, I have a XG home lic appliance setup in a virtual machine, and right now I have one nic for one Wan line. I want to add a new NIC so I can have a 2nd Wan line. I have two ISP lines coming in, one from AT&T, other one from Verizon. I found out…
    • Answered
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • XGS2100 to 19.5 fail- Red Interface- DGD-"stopped"

    Charles Cook
    Charles Cook
    I started this update this morning around 10am (14 hours ago). I was running 19.0 with no issues. I have the XGS2100 with the 4x 10Gb SFP+ Flexi_port module. I have 2G fiber in my A2 (SFP+) then in Port2 (1G) I have a coax modem as my backup. A1 (10G…
    • Answered
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • Sophos firewall HA (active-passive) Topology with two WAN uplinks

    subin sunny
    subin sunny
    Let me brief the topology, we have two WAN uplinks connected to a active -passive HA. The issue is after initialization of HA one of the uplink status goes to RED.we are unable to use the 2nd ISP as a load balance
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • Redundant internet for HA firewall

    John245
    John245
    Designing the solution for redundant internet for a HA firewall. The architecture I have in mind is: Is this design complete or should I add additional items? --- John
    • Answered
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • Firewall can't switch on backup connection

    Kacper Zontek
    Kacper Zontek
    Hello, I have a problem with the backup link in Sophos. We received an LTE link that works and has the correct address set. The "Type" options were set to "Backup" and the "Activate on failure of" rule was set to the main link. The problem is that when…
    • Answered
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • Configure two WAN for WIFI zone

    Authorized
    Authorized
    Added second WAN zone network port5 ipv4 192.168.101.2/27 gateway ip 192.168.101.1 SSID new network DHCP Firewall Rule WAN link manager information able to connect Tablet to Wifi and i get DCHP release result block firewall…
    • Answered
    • over 1 year ago
    • Sophos Firewall
    • Discussions
  • How to combine three wan to double the speed

    fouad sayed1
    fouad sayed1
    I have three WAN, each line 20Mb, I need to merge to get total speed 60Mb not load balancing to found in final in speed test give me 60Mb
    • Answered
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • Wan-Link Manager shows wan down, but in reality its up

    ADVAIT GHAISAS
    ADVAIT GHAISAS
    On top of it showing the WAN as down, its always showing 25% packet loss. WHereas if I connect my laptop directly to the ISP router, the is no packet drop.
    • Answered
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • Sophos v19 Wan Link Manager - One active Two Backups

    Riccardo De Lazzari
    Riccardo De Lazzari
    Hi, I need a little help. I have client that has three WAN connection. One set to Active and two Backups. How can I choose which backup connection will take over first, if the Active one, fails? I have this option: but it let me choose only between…
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • XG v19 WAN Link Manager: Error when updating Failover Rules

    Joshua Drost
    Joshua Drost
    I often receive the following error when trying to update a failover rule for one of my gateways: "Gateway failover rule could not be updated" I can't find any consistency in how to re-create this. I'm not sure if the problem also existed in v18.x…
    • Answered
    • over 2 years ago
    • Sophos Firewall
    • Discussions
  • Sophos Firewall: Difference between WAN Link Manager and WAN Zone report

    Keyur
    Keyur
    Disclaimer : This information is provided as-is for the benefit of the Community. Please contact Sophos Professional Services if you require assistance with your specific environment. Hi Community, This article describes the Data Transfer Traffic…
    • over 4 years ago
    • Sophos Firewall
    • Recommended Reads
<>